How to Replace a Tail Light on a 2013-2021 Mitsubishi Outlander

[@pbharrin1234]

this was a great video for the Mitsubishi Outlander 2019 SE. I second the below comment, if there is dust or damage from a minor accident, the old tail light may take some elbow grease to remove with a screwdriver/pair of pliers. Otherwise his video is spot on! Great stuff YOUCANIC!

[@pookguy188]

Hi can you do a video on how to replace the inner tail light thanks

[@jessie7011]

Did you ever find a resource to fix it? Still can’t find one

[@jessicapiche3536]

also looking for one! @@jessie7011

[@kayj3388]

Hi can you show how to replace inner tail light thanks

[@gdibble]

❤ Great video, ty for sharing

[@SOLIDJEFFROW]

Where was the connection piece on the inside you didn't show to open it?

[@jstodd25]

Also have the same question as I need to replace my whole taillight as the plastic casing is broken. Where do you have to go on the inside to be able to pull the connector so you can attach the new tail light?

[@TharzZzDunN]

Very useful, just a note though if enough dust settles behind the light it can create an adhesive effect that you will need a screwdriver to lever it free. 😅

[@mandrew31]

Thanks so much!

[@Tor.G]

I also need to replace inner tail light. There are no videos on YT on this.

[@gmudude]

Did you ever find out? Seems like you have to replace the entire thing??

[@Tor.G]

@@gmudude The inner tail light is fairly easy to change. I did it, but made no YT of it. Just do it, you cant go much wrong as I remember.

[@cfliEightLi]

is it possible to replace the blub?

[@popoartcraft5460]

tail lamp asx 2010 . do i need change whole set or just the led?

[@keene226]

did you ever get an answer??

[@popoartcraft5460]

@@keene226 yes. there was burnt just small led under dashboard front passnger seat. tht effect tail lamp off

[@ShirleyMiller-ui8ks]

How much will it cost fir a light

[@jessie7011]

For anyone needing to replace the inner taillight: Job time approx 30 minutes. 1. Open up the boot, working outwards, remove the inner most plastic trim using a pry tool or alike tool on the interior of the boot door, the side pieces, & then the final piece (This information can be found on a KZbin video) 2. The taillight housing is attached to a bolt which requires using a fitted socket wrench to remove. 3. Remove the electrical plug the housing is attached to 4. From the outside, pull the old light off (take care if broken) 5. Reseat and connect the new tail light unit 6. Using the socket wrench, tighten the tail light bolt back on 7. Put the plastic pieces/trim back in the respective order.

[@Erickve2elp]

Help me please how to change the one on the suitcase, it is broken and I have to remove it to change it.

[@Erickve2elp]

Outlander 2018