How To Replace a Wired Doorbell with Ring Video Doorbell | DiY Install

[@TheFixerHomeRepair]

Buy a Ring Video Doorbell here - amzn.to/35jdQFN (affiliate link) Hey everyone, since some people have been asking... You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up. Also, doorbell wires are low voltage, they can not shock you and all that happens when you touch them together is the doorbell goes off. If it makes you feel better you can shut off the power in your panel but is not necessary. Please consider subscribing to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😃

[@martinneps9387]

Can this be hooked up to a android cell phone would love to know thank you very much for this video

[@718EngrCo]

If you have a digital doorbell you might have a DC transformer. Ring will not charge from a DC current, you will have to replace your transformer to an old school AC transformer.

[@selee_nium]

Okay thanks for clarifying! I’m terrible with wiring and easy things like this and I wouldn’t have gotten the courage to instal this on my own without you saying I wasn’t going to die if I didn’t know where to go turn off the power 😂 Thank you!!!

[@DFW817]

Great video & clarification.

[@tmangamingx]

I had one of these about a year ago someone stripped the nut and I never could get the camera off again to charge it and use it. I now just got another one in today. I missed it and I am waiting on my ring video door bell to charge. How long does it take do you remember ? Your tip about the existing wiring. Made me wish I had existing wiring then I wouldn't have to take it down at all right ?

[@domnfg]

I got a ring doorbell today and instead of reading the instructions I came directly to this video

[@HalkerVeil]

And probably fried it or it lost a few years off it's life because he didn't turn off his breaker for it.

[@domnfg]

@@HalkerVeil works perfect. Great video.

[@HalkerVeil]

@@domnfg I'm sure it does. Just don't be suprised when it doesn't in a year.

[@Nick-bh1fy]

@@HalkerVeil why bc he connected the LV to the terminals live? I’m confused

[@HalkerVeil]

@@Nick-bh1fy Yeah. Especially if it's a higher volt doorbell. They can range from 12 to 24 volts. Lower voltage won't do much harm but if it's a higher one it definitly will. The problem I had is teaching others to do it unsafe. And I don't mean just harm to the new doorbell. 24 is enough to spark a fire easily. If not at the point of contact, then somewhere in the wall.

[@donnahanna1080]

Thank you! I’m growing old waiting for my husband to install this!!! Doing it myself now.

[@thelandballin747]

Lol

[@jeffdur1330]

You go girl.

[@jennifer8717]

Wow!!!! We are in the same boat. I’m taking matters in my own hands too!!!

[@jeffdur1330]

@@jennifer8717 you guys should just divorce your husband's and get together! Between the two of you, imagine all you could accomplish.

[@versatilicallydisobayish5367]

@@jeffdur1330 😆💯

[@musicsaddiction]

I’m 4 years late but I just got a ring doorbell and this video is much appreciated. You gained a subscriber over here. Thank you!

[@MtnBadger]

A suggestion, when I ordered my ring doorbell, I went ahead and ordered a second battery. Now, when the battery runs down I just pop off the cover, install the fresh battery and pop the cover back on. Now my bell is always operating and I don't have down time while the other battery charges, which can take a while. Also, if a battery should fail, I'm not completely without my doorbell service while another battery is shipped. It's well worth the extra bucks for the battery and I highly recommend it. :) Good video, simple and correct. As for the height of mounting, it has a wide and tall range of view and people will look right at the bell when they go to press it, so you'll have no problem getting a face shot. If they're just coming to door or on porch, you'll still get enough view for an identification should you need it for later. (Cops, etc.) You can also adjust your field of motion sensitivity to get the best performance for your door. You didn't mention it but when you put in the first two screws to mount the plate, you went to opposite corners. You seem to understand the principle but to anyone else watching, mounting opposite corners like that ensures that you keep your level reference and helps keep even pressure on the plate so you don't bind it at all. Good demo.

[@jimmygrant424]

I cannot believe nobody and I mean nobody commented to say thank you for that is a fantastic idea!!!!!!!! You brought up very good reasons for ordering an extra battery so you the best comment award you have earned!!!!

[@MtnBadger]

@@jimmygrant424 Why, thanks for the kind words...

[@jferbie2000]

Thanks!!!

[@Orikix]

Thanks

[@chrislareau8110]

Hello. Could you please advise what the battery life is like.

[@Chisolm12]

One of the better installation videos I’ve seen. Clear and to the point.

[@yagottabelieve]

Clear is the understatement of the millenium! I think this thing was hot in like 48K!

[@jamesmgarcia5676]

This is a nice video, but does it keep the battery charged??

[@RJMEL24]

@@jamesmgarcia5676Wondered the same. Do you even need the battery if it’s hot wired like he did?

[@nickvalencia9067]

For anyone worried about not turning the breaker off before installing. Don’t worry, unless your doorbell is supplying over 100 volts (which it won’t lol). I’m an HVAC tech and 12-24 volts won’t harm you or your Ring.

[@tarajordan8893]

Thank you so much I’ve had my Ring for more than 9 months and have yet to install it because I didn’t want to destroy the front of my house but now i feel comfortable enough to do it myself 😊

[@Alexander_l322]

Did you do it?

[@GenkiJo]

Kinda same, but 2yrs for me!!😂

[@Khaos-y7n]

Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.

[@jamesburns2232]

I still have mine in the original box after 2 1/2 years. The programming step he skipped over in the video about chargine and programming it using the App is where I get flummoxed. I hired an electrician and he quit stating that my doorbell was an old 7 volt and needed to be a 12 volt to make it work. RIght now, the ring just sits there in its original box. But, my doorbell still works and so does my trigger finger. 🤯

[@johnr.french4982]

It would be good if the "government" would follow up and prosecute the porch pirates that these cameras catch in the act.

[@MichaelGregorash]

Good solid step-by-step instructions (Nice to know that even if the doorbell is lower, it still captures the video up well enough). Thanks for putting this together, I appreciate it!

[@David-iv6je]

The lens is fisheye, picks up a wide field of vision.

[@Khaos-y7n]

Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.

[@msmichele-SixtyistheNewSixty]

This was so helpful. It took me no time at all to install my doorbell. Thank you!

[@miguelgonzalez6206]

I just picked up a ring doorbell from Home Depot. Thank you very much your tips were very helpful.

[@TheFixerHomeRepair]

Very happy to hear this video helped you out, Miguel!! Good luck!

[@alh4218]

One point to note before installing make sure to CUT POWER OFF from circuit breaker to avoid potential electrocution. Safety first. Besides that good instructional video.

[@jwashingtonjw93]

And he explained why, in a prior comment/reply. :)

[@insp0776]

Awesome video. You did it where a woman like myself can do it. I appreciate simplicity. Thank you

[@RickyP033]

I am glad you cleared that up about charging first, then hooking up to an existing doorbell to eliminate the need to take it off to recharge. I didn't charge mine up BEFORE installing the first one, annd had to wait hours before I could use it. Also, if you do not have an existing WIRED doorbell, you can buy a transformer from most home tools shop and either hook it up to an existing 120 volt source or connect it to and outlet with a plug.

[@jaycollins9147]

After you charge it and wire it in, do you ever have to charge it back up again ?

[@joegardner5386]

Thank you!

[@butterbeanq]

i have the same question, as jay collins, after you charge it. Do we need to recharge it again or is just one charge..??

[@micheleschuster0712]

you should not have to recharge it IF it is hardwired.

[@matt8863]

The Ring Doorbell Pro requires a constant power supply with a voltage between 16V-24V and at least 30VA of amperage. Even if your voltage is reading 16V-24V you still need to check that you have 30VA of amperage from the transformer, as this is the recommended amperage requirements from the manufacturer of the Ring Pro Doorbell. It should be noted that the Ring Doorbell Voltage requirement for the Ring Doorbell 2 is lower because the Ring Doorbell 2 has a built in rechargeable battery, so it can accept a wider range of voltages because it charges the battery that powers the doorbell vs providing direct power to the doorbell. The voltage requirement for the Ring Doorbell 2 is between 8V-24V AC. We typically recommend using the Ring Doorbell Pro because it has more features but the Ring Doorbell 2 is a great option if you don’t have access to change out your existing lower power transformer.

[@FitnessMcDonough]

Thank you!

[@landroverSV]

Question: If you don't mind, if one doesn't have the Ring Pro 2, you don't have to change the transformer, and even if hard wired, you still have to recharge the Ring Door bell 2 battery. Is that correct 🤔. Reason why I'm asking because the Ring company told me I have to change the transformer even with the Ring camera 2

[@theoutsiderspost4982]

I love how these cameras are everywhere so now you can be watched now only from the inside of your house you’re smart technology. But when you arrive home and if you ever need to be questioned. What a wonderful little accomplice

[@stuartcohen5519]

2 things. 1. Check voltage going to doorbell to see if it is sufficient. 2. Turn off power before replacing doorbell.

[@angeltorres5132]

I was so impressed by your easy instructions for Ring, that I ordered it fr your Amazon site for credit. Thank you from Texas😘😘😘😘

[@stevens.6652]

You did a great job. Better than most instructional videos I've seen

[@sheenajefferis7170]

😂❤

[@dshafro]

Thanks for the detail step-by-step for those of us who are less handy.

[@guidoscalise]

Nice tutorial! One thing, though… I know (and you know) doorbells are generally safe, but your viewers may not be as experienced as you are, or could be working with dangerously/incorrectly installed circuits, or might misjudge their safety and end up getting shocked. Not explaining/observing basic electrical safety practices (like switching off the circuit breaker and never handling live wires of a system connected to mains) when explaining these topics could backfire one day for either you or your viewers. You create some great content, make it even greater by teaching your viewers how not to get shocked 😛

[@frankg846]

that's a good point, i thought those wires are non electric, if they're as he stated why is it that it doesn't mater which side the wires goes, that means no positive or negative at all?!!!

[@guidoscalise]

@@frankg846 Nope. That's because the wires run alternating current, which means the polarity changes constantly, it's just like your mains electricity, except at a lower voltage (8 to 24V AC normally)

[@frankg846]

@@guidoscalise so the wires are electric and you have to turn off the breakers first, correct?

[@guidoscalise]

@@frankg846 Yes, those wires are live. In fact, the Ring Doorbell maintains a trickle charge to its battery through them. So, it's not a bad idea to turn the breakers off. It takes you less than 30 seconds and it's a good habit to have anyway.

[@frankg846]

@@guidoscalise awesome! Thank you, wanted to install mine today.

[@lexiekrueger8097]

I’m not even kidding when I say this, this tutorial made everything make so much sense I went and bought one right away to install lol

[@TexPR1]

Very nice informative video! Do you have to take this thing down periodically to charge the battery? If so, how often is that?

[@butterbeanq]

@TexPR1. You only charge it once, if your doorbell is direct wired. The wires are direct thats your power source to charge it but if don't have direct wire rhen you have buy a separate charger for it. Good Luck.

[@tonymorgan2813]

Great video, simple and in layman's language, I'm installing a ring system and this is the perfect tutorial video...nice doggie!!!!

[@cassondrad2280]

Easy, peazy. Even a gal can install it. Thank you, You kept it simple

[@TheFixerHomeRepair]

You are welcome! I hope it helped you out, Cassondra!

[@NonPremiumID]

Sexist comment. Why cannot females do what makes can?

[@H.pylori]

Thank you for this video. You simplified the process so well that even a klutz like me could possibly do this. Now off to see some of your other videos.

[@TheFixerHomeRepair]

Glad it was helpful!

[@tamberlinferguson7856]

i dont even need this but you made me want one.

[@ShilohBoca]

Everyone needs this

[@bluerider0988]

Thanks, you totally helped me out. The screws over the years had worked their way out and was preventing proper contact. Thanks!

[@AndyMaus]

You should always turn off the power at the breaker first even if it is low voltage.

[@Alexander_l322]

No I like the tingle

[@TheRedRaven_]

Yes, anyone saying no is an unsafe moron.

[@Alexander_l322]

@@TheRedRaven_ it’s low voltage shut the fuck up

[@TheRedRaven_]

^^ Low IQ

[@StevieD44]

kiyonexus Clown.

[@robertc8134]

Good video! Your dog is not the only one that barks! My German Shepherd starts barking the minute he hears your dog barking in the video! Every time, too. ha ha I'm going to pick one of these up today.

[@leodentperu]

Thank you for your very easy to understand video. Just one question. How many phones can be set with the doorbell camera apps? Thank you.

[@jenniferwillard5066]

Thankyou so much for these step by step instructions. I was really wondering if I might be able to install it by myself (70+) and I think I can. Very well done.👵

[@TheFixerHomeRepair]

Hey Jennifer! If you have any questions on install, don't hesitate to reach out! 😃

[@vxsapphire]

We don't even have our house yet (In June) and I'm already planning to do this via your instruction. I was going to get the small basic one, but i'll have to get the 2nd gen one since it helps you out when the time comes. Thank you so much!

[@TheFixerHomeRepair]

Thanks so much! Hope the instructions help. Good luck and congrats on the house!

[@domedomelinson]

I bought the Ring 2 at Costco today. Got it all installed and it works great. does the battery have to be used even though I've connected it to the doorbell wires?

[@NonPremiumID]

No, if hardwired

[@cathyorendorf]

Thank you for posting this video. I had concerns about purchasing the ring doorbell because our current doorbell is low like yours, I was afraid we would have to replace the wood around the door in order to make it work, but your video eliminated any concerns I had.

[@0816sexy]

That is not safe because, you're install an Apllication before you use that device Ring and they will collect your information, camera and picture's so, hackers can watch you and the whole world. Hackers can open your door lock by using the App. So. Not safe.

[@Mcbebblestin]

@@0816sexy the ring cannot unlock your door idiot

[@deenajones9019]

Anyone newly viewing this video should consider keeping your wired doorbell and install Ring for one reason: only the people who have access to your phone will be able to see who is at the door and interact or speak with them. Another situation to consider is this: if you leave home and family members remain, they will not be able to use Ring if you took your phone with you. Unless you are able to link your tv with Ring, a major obstacle will prevent visual images from being accessed through this device.

[@MrCHOCBROTHA]

Thank you for saying that. I just purchased the ring yesterday and I was sitting here debating if I should remove my doorbell or install the ring camera along the side of the existing doorbell. Thanks again!

[@themono7508]

Great tutorial. I was worried the doorbell location was too low but I can see now that the wide angle lens actually has good coverage from the doorbell location. I'm glad to find someone that shares an install of this device. Ring actually does an incredible job of providing installation guidance and materials. As a person who works with both high and low voltage equipment I have to disagree with the idea that its fine to leave the power on. If you provide the ground to a low voltage circuit it can and will shock you. It will not kill you but you will feel it. If you short your circuit to a ground you can pull enough amps through the transformer you can burn it up and make another item to install. So, dont work with live power, and never suggest someone else to do so. Please

[@NonPremiumID]

Yes, he should had told viewers to turn of their circuit breaker.

[@FloridaSalon]

Thank you. I keep seeing people leave the power on to wire Ring doorbells. I wasn't sure why. You explained their reasoning to me.

[@merryworld4776]

@Rodney Stockstill Thanks for that info. I was wondering about that, too.

[@clayfulgham21]

Finally! The perfect DIY install video exists. Well done

[@xxJoeBonesxx]

Thanks man, I will be using this as a step by step guide tomorrow to hook up my Ring. Great video. Made it look easy.

[@mariamason8600]

Thank you. Now I can finally change my old doorbell instead of becoming 2. I will watch this again to install a new ring. Thank you for easy instructions ☺️

[@crudolph277]

Thank you for this video! This maybe a dumb question, I apologise, but if I'm wiring it to my house, will it charge the ring automatically? I noticed you mentioned taking it off to charge it... I thought wiring it up was supposed to keep it charged.

[@djstreamtv]

I thought the same and was hoping for a reply. Welp, more KZbin research it is lol.

[@crudolph277]

@@djstreamtv it keeps it charged! 😆

[@djstreamtv]

@@crudolph277 thank you!

[@lulaboo4393]

Great video. Every time the doorbell went off my dog barked. I guess he recognized the sound. We have a Ring.

[@kyky9608]

You made this look so easy! I feel empowered to make the purchase now & to do it myself.

[@marieantoinette81]

Right. I said the same thing too, now I’m gonna go buy one and see how it goes for me too. Wish me luck 🍀 😊😊

[@digidrawdude]

@@marieantoinette81 how’d it go? Did you get it all setup?

[@marieantoinette81]

@@digidrawdude Yes, sir.

[@digidrawdude]

@@marieantoinette81 good to know! Glad you got it working!

[@mica7260]

Thank you so much. This video is so much helpful for me. I've never installed anything in USA so I was nervous.

[@jguille10]

The chime works with ring or this ring bell only has a notification on the phone?

[@PacoOtis]

The setup is the real task!!

[@juggalokarnage7108]

Didn’t know it was as simple as this! Definitely getting one now thank you!

[@alcameron6071]

Same here. I thought it was a big process you have to use a app

[@theatushafamily4977]

I’m getting one right now. People are stilling my packages 📦 like crazy 🤕

[@aprilleak4356]

What’s the monthly cost?

[@1timerod]

Facts

[@jaimeponte5832]

Is any video doorbell that gets the power from the normal wires? I am not so thrilled about having to charge a battery. Excellent video. Clear, concise, to the point. Thnak you!!

[@TheFixerHomeRepair]

Hey! I should have clarified in the video… if you have existing wires, they WILL charge the doorbell 👍

[@jaimeponte5832]

@@TheFixerHomeRepairThank you very much for your answer. Having said that, it will not be necessary to charge prior to installing?

[@cskiles318]

I have one on the way. Il be installing myself. How did you not get electrocuted?? Il be shutting off power cause my luck has been pretty bad this year.

[@BeagleMom80]

I was wondering that too. 😆

[@Mearyeaurng]

love your videos. so you don't need to cut off the electricity that goes to the doorbell? thanks.

[@TheFixerHomeRepair]

Thank you. It is recommended to turn off the electricity but the wires are low voltage so I wasn't worried. Thanks for watching!

[@Mearyeaurng]

The Fixer thanks!

[@NonPremiumID]

Always turn off power.

[@angeleyes9315]

Excellent clear and concise! Installed the Ring doorbell in an 1 hour. Most of the time spent drilling through brick. Thank you! I'm a subscriber now! How about porch swing installation?? You know anything about that? 😉

[@lendmeyourear3546]

That’s a great question! I’d like to see that too!

[@mrseddiediaz]

Please tell me I don't need a drill. We don't have a drill

[@raulvega2955]

Looks as easy as making a peanut butter samich, I think I'll give it a shot. Great video. Thanks

[@SReed-ql5ix]

Thank you for the great video. Clarifying Question: So if you do not have an existing doorbell, you can just mount it to the house (following all the instructions, except the wiring)? What’s the purpose of the diode?

[@callmenene_]

I have the same question

[@misfit91733]

Correct you can mount the ring doorbell basically anywhere. I would recommend the solar charging base plate otherwise you will have to remove the ring doorbell to charge it. The diode is if you have a digital chime in your house. You stated that you do not have a doorbell so the diode you can disregard.

[@maggiebrooks2550]

Thanks man. Ive had mine for months but I didn't know how to install it, & I was intimidated 😊

[@georgiapeach7291]

Wow, that was easy! Thank you for the awesome video. 😁

[@TheFixerHomeRepair]

Yes, very easy peach! Thanks for watching!!

[@lorriwitham4729]

You make things look so simple. Watching you from Bakersfield, California. 😀👏👍🏻

[@PanChod-ct7ou]

So you still need a battery even though you’re using the existing electrical wiring?

[@TheFixerHomeRepair]

You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up.

[@maddrummer900]

I was going to ask this same question. Thanks for posting!

[@TheGjergj79]

I hooked mine up to a digital box and now it starts ringing on it's own and won't stop ringing unless i un hook it.

[@ohana40]

Great video! We installed like you did with existing doorbell....we can’t get the doorbell to ring in the house?? All wires are connected-any ideas??

[@TheFixerHomeRepair]

Hey there! First I would make sure you do not need the diode on the doorbell. If your doorbell was a “ding dong” type of doorbell, you shouldn’t need it but if it plays multiple different rings or melodies you might need it. I actually made a diagnosis video that might help you out here kzbin.info/www/bejne/eGeXi4aYn9V1ibM hope this helps. Thanks for watching!

[@NonPremiumID]

If you have a digital doorbell chime, it's required in order for your Ring Doorbell 2 to function properly. The diode is not required for a mechanical chime.

[@toms.3977]

Great install video. The new doorbells are packaged differently without a back plate. The wires mount directly to the back of the doorbell. I just got my Doorbell 3 and in the process of installing. Thanks for the info!

[@drewwestgate7570]

THANK YOU!! I would automatically pay someone to do this, but I am so confident I can do it having watched you. Thank you so much for such a great video :) Bless you and your pup! ~D

[@jimmygrant424]

You can send me the money!!ll

[@kimtonearts]

Great work. Keep inspiring young people to learn how to do things and do them right.

[@Khaos-y7n]

Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.

[@rosario9496]

Thank you. Great video. About how high off the ground is your doorbell?

[@matthewjl4127]

4:43 The best doorbell & home security you can get!

[@dougcoleburn1579]

Nice! What if your door trim is really narrow? How would you mount? Does it have to be hard wired? Thanks

[@Luminexidone]

Whole lotta people from Amazon Prime Day is about to raid this video

[@TheFixerHomeRepair]

I hope this is a good thing. 🤔😁

[@aspjake123]

I am one of them lo

[@chrisyeatts]

I did this same exact install and the inside doorbell still doesn’t work. Any suggestions?

[@Peter8831]

Yep, that's me 😂

[@wicker478]

As I am one of them.lol

[@Coffeeology]

Thanks boss! I needed a ring video doorbell, and after watching your video I ordered through your link and it's already connected. I did want to add, they no longer offer the screw driver so you need to bring your own Phillips screw driver.

[@MikeH0311]

My dog went crazy barking every time you ringed the doorbell 😂😂😂😂

[@TheFixerHomeRepair]

Haha 😂😂 Yup, thats what they do! Thanks for checking out the video!

[@ramm150]

Did you have to disconnect the circuit somewhere before performing this repair? Does a doorbell have a standard 120v outlet?

[@Lillias39]

I need to know as well. Don’t want to get electrocuted but it didn’t look so

[@anthonye.2553]

Great video mate! Maybe a dumb question, you don’t need to cut the power before messing with the doorbell wires?

No because there is no electricity going through them, unless they touch each other. That’s how the doorbell works!!

[@niajjah]

Mr Fixer, you didn't have to disconnect anything from the main box before attaching to the doorbell wires? I just bought one. Thx for the vlog.

[@v.terrellh706]

What about the electricity? Does that have to be turned off before disconnecting the doorbell?

[@NonPremiumID]

Yes, shut off power first.

[@IraqiSniper107]

Would like to see you install a wired Ring install on a brick situation. It's easy to install on a space that has adequate space in the situation your showing

[@joseluistelotstudio5358]

I have to install one tomorrow so I’m so happy I ran into this video! One video, that’s all, see it here. One and done! Thanks!!!

[@dulcemreynolds]

I noticed you didn't turn the power off for the doorbell via the breaker box, isn't that necessary?

[@NonPremiumID]

Yes!

[@drizzo4669]

You totally deserve your percentage of the sale. I'm gonna save this video and use your link when I buy. Should be before Saturday. Great tutorial. 👍

[@DougFM]

That's exactly what I was looking for. The one I have installed went offline so I had to take it off to press the reset button. I was out there with a tiny allen key trying to get those bottom screws off until I watched your video. Thanks man!

[@carlitospineda9853]

That's a ring the new camera on and off do they insert camera

[@2945antonio]

Thank you Very Much. Your presentation was very helpful; it is tailor made for guys like me .,who have very limited knowledge and skills with this. Thank you again.

[@TheFixerHomeRepair]

Hey Antonio! I'm glad that I could help. 👍😃

[@markiemark4544]

This instructional video is well done Fixer. You had a nice touch in that you went straight into this an original purchaser, and did the install from scratch (which is probably how 85-95% of folks go into purchases and installs like this) so that provided a great deal of realistic 'what-can-happen' effect to this video and that helps me when I'm actually doing something for the first time. (As an aside, for the 1st timer, they should find the circuit breaker that powers their doorbell and turn it off before they do anything like this, since electricity can be a real bugger if you don't turn the power off) / Fixer, much appreciated (as I'm going to order this thing now and be just like you within 2 days from now !) / Cheers !

[@davidwhite5893]

Question does video camera always record or only when someone pushes the door bell

[@NonPremiumID]

1 motion activated, 2 button pushed

[@beb1527]

Well done! Never considered one of these because I thought additional wiring would be needed.

[@seedsoutdoors3721]

Well you almost should so you don't have to take your doorbell off to charge it

[@beb1527]

@@seedsoutdoors3721 so it won’t charge then with the existing standard doorbell wiring?

[@seedsoutdoors3721]

@@beb1527 I guess not he was saying in the video you have to loosen the screws and take it down to charge. Kinda pointless in my eyes

[@thehouseofbaashainc.8902]

Thank you so much great video!

[@priscillarivers699]

Thank you! Looks like it’s something I can actually do myself 👌🏾👍🏾👏🏾

[@3crusade]

My doorbell is horizontally located and on a siding, not sure if it would work to mount the exact same way you did in your video?

[@MarkThomas-yy4dk]

Good video, thanks! Your handling of live wires was making me cringe a bit though. I got shocked the other day installing a light switch, I flipped the breaker the wrong way after some testing. Easy to avoid!

[@ginjaninja1995official]

It’s only 24v give you a little flick that’s all

[@mznovemberzworld7091]

Awesome video🎉 Heading to go purchase a new Ring, to upgrade my dated door bell. I’ll let you know how it goes

[@emsmith2519]

Thank a bunch for making this video, I've been wondering if I could do this myself or not, I wasn't sure, but now seeing you do it, I'm pretty sure, I can handle that. One question, is there a monthly fee you have to pay to have that working properly?

[@imChanthip]

Its 3 bucks a month, look on their website to be sure

[@emsmith2519]

@@imChanthip Thank you so much

[@imChanthip]

@@emsmith2519 np, just installed mine but my front area is brick. It was a pain

[@TheFixerHomeRepair]

Happy to hear the video helped! Looks like @imchanthip answered your question. Thanks for watching!

[@Electra225]

@@imChanthip I did not know there was any fees. Looking on their website did clear that up for me; thanks for the tip.

[@hsosaus3122]

Great video thank you. Does one need to go to the breaker box to turn off the breaker?

[@velascojidon390]

1:33 can u explain how u connect the door bell to ur phone?

[@jerryhackelton5791]

Thanks for putting this video up. Looks easy, no need for an installer to do it for me.

[@liajohnson685]

DUDE I LOVE YOU !!!!! BEST DARN VIDEO IVE SEEN . YOUR THE BEST MAN. THANK YOU SO MUCH FOR THIS PERFECT VIDEO WITHOUT YOU I COULD NOT HAVE DID IT ON MY OWN. IM SO PROUD OF MYSELF. YOUR AWESOME . 👍🏽😁

[@TheFixerHomeRepair]

That is amazing to hear! That is why I make these videos. Thanks so much for letting me know it helped you out!

[@NonPremiumID]

Lol

[@liajohnson685]

Home Theaterguy 🤓😁

[@NonPremiumID]

@@liajohnson685 🤣

[@sbl2051]

What would you have done if the wires leading from your existing doorbell had been too short to connect to the Ring? I have that problem.

[@deborahnail3306]

Prime Day purchase here.🖐 Thanks so much for sharing!! Mine is a three so looks a little different than yours. I will purchase one for my back door on Cyber Monday. I just subscribed so 👋 hello from Sweet Home Alabama!! ROLL TIDE❤️🏈 Stay safe out there everyone. 😷😷😷

[@gospelician]

Thanks. Should you turn off electricity before touching live wires or not necessary?

[@william9922]

Not on this because it’s very low voltage.

[@Greg-wz6fp]

Thnx for the video my ring just came in last night gonna go give this installation a whirl

[@TheFixerHomeRepair]

Awesome! How did it go? Very curious to hear. Thanks for watching the video, I hope it helped out!

[@consuelajuarez8938]

Thank you for this video! Question, do I need to turn off the power to the doorbell before I install it?

[@TheFixerHomeRepair]

No problem! Hope the video helps. Yes it is a good idea to turn off the breaker to the doorbell.

[@davidpayton8336]

How long do the batteries last? And if I'm hooking it up to a constant flow of electricity, why wasn't this thing engineered to draw power from being connected to electricity in the first place?

[@base6377]

6 to 12 months depends on how much motions r there

[@pattiray6816]

Great video, rookie here, one question. Do I have to cut power to the doorbell? It didn’t seem like you did.

[@davidirwin7253]

I wondered the same thing 🤷‍♂️

[@NonPremiumID]

It is always the safe way to turn off that circuit on your breaker before installing it.

[@MicrosoftWindowsTwo]

"If you hear the dog bark, the door bell works." lol. Great video.

[@TheCanada1]

Nice. Obviously low voltage so no worries about shutting off power? Thanks again.

[@m4ttyicebecheffin698]

Even though you did ... you still need to charge it? What is the point of wiring it? For the bell?

[@pjcollazo8318]

It received a trickle charge so kind of the same relationship a car battery has with the alternator. The battery starts at full charge, and receives a constant maintenance stream of power so the battery never discharges.

[@jvhfilms]

Who can dislike this video!!!! Burglars 😎😎😎😎 Great vid!

[@MIKoenig44]

Set up my Ring today. Thanks for this vid. Was really helpful!

[@TheFixerHomeRepair]

Hey, Jeff. Hope it helped! Thanks for watching!