How to replace Audi 3 button flip key shell (Step by step guide)

Replacing the key shell of Audi A6 2005 (C6). Demonstrated by Luka Stokic.
Hope you enjoyed the video! Don't forget to like, comment and subscribe! :)
✖ FOLLOW ME ON SOCIAL MEDIA:
►Instagram: / lukas__life. .
►Facebook page: / stokicluka
►Twitter: / stokicluka

[@robertbuckley7010]

Tork size is T7 and T5 !

[@LukaDrives]

Robert Buckley Finally someone! Thanks dude! I will trust you on this one 👊🏼😎

[@Skatin24z2]

Actually its a T6 & T5...

[@swick845]

Its T6 and T5!

[@duncanevans4758]

I found this tutorial really helpful and it explained every process well. Thank you!

[@jackquinn4363]

this video helped me with the spring loaded aspect of the keyfob

[@LukaDrives]

+Jack Quinn Glad to hear that. Have a great day! :)

[@Carmafixcars]

Good video for reference. Don’t forget to transfer the chip if you have one in the original remote. Also, the replacement shell doesn’t have seals on it as the original, but I don’t think that’s a big deal. The pin needs to be taken out with a special pin press tool, hammering on it will probably shatter it, or you can get it cut by a key cutter. I used the old blade and just used one of the slim original screws instead of the pin, worked just as well as it sheared off and acts like a pin. The logo is glued on, so that can be transferred too.

[@cliveyoung3619]

great vid thanks , I used your vid to replace the rubber buttons and it worked great , even the tiny screws stayed in the housing !!! I put an extra turn in the spring and it whips out like a switchblade now :)

[@LukaDrives]

+Clive Young Great, glad it helped! Haha, and good tip for the spring, thanks! :)

[@richy9128]

Clive Young hey my rubber buttons have come out are they easy to put back in?

[@citylockapolytechnikeyllcc7936]

Very well presented. Just a few points: 1. What is the exact driver size and type for the two smaller screws. 2. If replacing the case, there is a glass Philips chip that needs to move, as well. 3. Replace battery with a fresh one. A Client brought in an "EBAY" key that was recycled, but seller did not put in a fresh chip, and the locked chip will not unlock for programming. I need to disassemble in order to make this flip key usable. For me to be able to program the new key after I cut it, I need a chip that is not locked. Since we carry these chips, no problem.... or so I thought; for want of a correct screwdriver !

[@LukaDrives]

Thank you! 1. I am not sure really. Someone in comments asked the same :/ All I have is where I bought it from: www.amazon.co.uk/New-Horrizon-Pentalobe-Phillips-Screwdriver/dp/B00KAYLF1Y/ref=sr_1_3?ie=UTF8&qid=1482426675&sr=8-3&keywords=tools+for+opening+iphone 2. Yes, someone else mentioned that too - I haven't had any in my key. Don't know why. I have done everything as in the video. 3. Very good advice :)

[@MrMagicmajuk]

Thank u very much. Very helpful. 👌

[@AnLo502]

Thanks for the video, it helped me a lot

[@LukaDrives]

AnLo Andres Lopez Glad to hear that! Have a good one 💪🏼😎

[@TOPTRADER007]

How Do U Change The Laser Cut Key From One Broken Stub To A New Metal Stub?????

[@adampiatek6660]

need to punch out pin

[@benrichards8747]

Can I ask where you purchased your replacement key fob for this video? Only the one I bought didn't have all the connections so it wouldn't open the car, it woukd only lock and open the boot :/ thanks

[@LukaDrives]

Hi Ben, thanks for your comment. Sorry to hear that! I barely found the link as I have bought it more than a year ago. But here it is: www.amazon.co.uk/dp/B00CFG1WPO/ref=pe_385721_37038051_TE_3p_dp_1 I have had some issues with parcel not arriving and being delivered back to the sender, but I hope the same will not happen to you. If you have any other questions, please don't hesitate to ask. :)

[@MM-un3nb]

Good detailed & informative video. Thanks for sharing ❤️❤️❤️

[@LukaDrives]

Tnx bro 😎

[@bryanninan1748]

Was there no glass transponder capsule you needed to transfer over?

[@LukaDrives]

+bryan ninan Thanks for your comment. Everything that was there is shown in the video. Is your key slightly different then? This is for Audi A6 (C6).

[@jaredburns6797]

There is a small tube shaped transponder which communicates with the vehicles immobilizer. It's locate in the corner under the circuit board. If you don't switch it out the fuel pump will be immobilized and the car won't start. It will say "SAFE" on the dash computer. Its fairly simple to switch the transponder out if you're gentle. Great video otherwise. Thanks for posting.

[@LukaDrives]

Thanks Jared for your input! For my key, I have just transferred the motherboard exactly as I showed in the video and it all worked.

[@ukturboDean]

Great video, there is a glass pill immobiliser chip in my 2010 TT key, before i realised this the key woulf open the car and it would start but inly run for seconds. Swapped the pill over as well and now all good.

[@gekyle]

Thanks for the video. Can anyone recommend a shell that includes the housing for the glass cylinder chip? The one I bought from eBay doesn't have this and so I can't transfer this component over. My car is TT 2008

[@nova_squad_bossx1818]

Did this and now car stuck in safe mode? Did everthing in video any advice??

[@thomasscott7783]

Which size torx screwdriver did u use? Having trouble getting the screws out once I have the back cover offThanks

[@LukaDrives]

Hi Thomas, I don't know the specific size of the screwdriver, I have used the one that you get in the tool kit for opening your iPhone. Example: www.amazon.co.uk/New-Horrizon-Pentalobe-Phillips-Screwdriver/dp/B00KAYLF1Y/ref=sr_1_3?ie=UTF8&qid=1482426675&sr=8-3&keywords=tools+for+opening+iphone Hope this helps!

[@aminess5520]

Thanks for the tutorial, but there is not an id ship inside the key ? I tried but when i would start my audi a3 i can't, i have safe mode.

[@LukaDrives]

Hmmm… some people mentioned this too. I had no issues whatsoever 😅

[@johnbaldock6353]

Great Video! Thank you

[@LukaDrives]

Thank you John! Enjoy your day :)

[@johnbaldock6353]

And you! happy New year XXXX

[@LukaDrives]

Thank you buddy, to you too! :)

[@gabyygomez4244]

Hello Can you tell me where is the transponder in this key? Thank you

[@LukaDrives]

Gabyy Gomez Hi Gabyy 😊 I actually don’t know. Some other guys on here have asked about the same but everything that I had in the key was shown in the video. Sorry I couldnt be of more help

[@gabyygomez4244]

Thank you

[@raymomull2258]

Don't forget to transfer over the little Audi sticker to the new fob, you wouldn't want people thinking you're driving a vw!!!

[@LukaDrives]

Raymo Mull Hahahah very true! 👊🏼😂

[@juliogarcia5304]

I just did this but some reason the unlock bottom it's not working only the lock

[@weeper82]

Thanks for the video, really

[@LukaDrives]

Fabio Mercuzio You are very welcome! 🙌🏼

[@corinnek.9320]

Tut parfait et facile à suivre...

[@LukaDrives]

Corinne KOTT Merci beaucoup 🙌🏼☺️

[@fernandoGomez-ct1vd]

how did you reprogram the key though cuz I replace the battery and now I have to reprogram it and I don't know how to

[@LukaDrives]

Hmm... Interesting! You shouldn't have to since the motherboard has been transfered. It is pretty much just a reset as if you were to change the batteries. 🤔 Try googling and let me know how it goes! Good luck!

[@JAMRO88O]

What size torx (star) screwdrivers are required?

[@LukaDrives]

Hi Jamie! I will have to check in my tools tomorrow because I have done this video long time ago so I really don't remember :/

[@kevinkev1530]

Thank you

[@cpftech6876]

What year is of Audi was that ?

[@LukaDrives]

2005 🙂

[@E92TilInfinity]

where did you get the new casing?

[@LukaDrives]

Skankhunt42 On Amazon. I have responded to some of the previous comments with the exact link. Cannot copy it from my phone at the moment. Let me know if you cannot find it and I will send it as soon as I'm on my laptop.

[@LukaDrives]

Here is the link if you haven't found it: www.amazon.co.uk/dp/B00CFG1WPO/ref=pe_385721_37038051_TE_3p_dp_1

[@ammaralalo6465]

👍

[@Galaxy541]

Show us on the new Audi fog key

[@LukaDrives]

I would do so! But do not have the new Audi key :(

[@Galaxy541]

LukaSDaily I will send you one

[@LukaDrives]

Please drop me an e-mail (which is in the 'About' section of my channel).

[@Galaxy541]

LukaSDaily I don't see it

[@gtoat9712]

and the panic button

[@LukaDrives]

Haha... Needless to say that I wasn't expecting that key fob to be of the highest quality :D

[@tonytonez5561]

I can't get rubber button 2 go back in for life of me