How to Replace Brakes on any Chevy or GMC Truck 1999 and newer

[@raulguevara8792]

Like how u did n explained everything as a normal person. Thx for this video

[@Inviting1word]

I dont have kids, i really want them though. I thought about essentially doing the same type of format, but like im explaining it to my kids. Thanks for being a good neighbor, and showing us all how.

[@TomWylie]

Thanks, this was a helpful prep for gearing up to change our '09 Yukon brakes.

[@lesschaub985]

Absolutely disagree with your choice of grease. You need to use appropriate lube. Vasiline melts at skin temp, what do you think will happen when the brakes are used? White lithium is not much better. If the pads do not come with grease, buy some. Do not cheap out on brakes.

[@MrSeanface]

Going to try my first break job on my truck next week! Will watch this video a few times haha. Expect some questions lol!

[@yackfzay6224]

It's great to learn about cars parts. I wish I can some of that stuff. Not very good with them.

[@miguelosornia3021]

Video helps a lot ....u make it look easy

[@augustreil]

It's a shame that the factory doesn't put some anti-seize on those pins when first installed, it would save a lot of unnecessary work and uneven brake pad wear. They probably don't because of cost and also helps the dealers get brake work. Nice job and video !

[@claudiaoctavia6340]

those caliper slides, pins and busjings are lubricated at the factory, this set was neglected for years and the lube was probably burnt/ washed away years before

[@matthewweidemann8155]

There are practical limitations to what you can use as the slides need to slide easily, and most anti-seize is somewhat thick and gummy. The best way to ensure proper function is to clean everything, thoroughly (if you have a bench grinder with a wire wheel, clean those pins!) and use only a film of lubricant. Gobbing it on there the way this guy did doesn't automatically hurt, but it doesn't accomplish anything, either except to collect more dirt. And while petroleum jelly and white grease may be slippery, you need to keep the wash-out resistance in mind. You don't want water washing those gobs of grease onto the pad faces or rotor itself. Brake lubricants keep wash-out resistance in mind. A great alternative is to use those spray-can products of anti-squeal on the back of the pad faces as it creates a water-proof coating that won't wash out. Followed by a little molybdenum grease (which serves a specific purpose on brakes--very high melting point) to the caliper piston faces (just a film) and things should be all well.

[@sammontiforte7472]

The mount bolts don't come out easy cause they have loctite on threads from factory. Impact works easily on thread sealer bolts. Don't you lithium grease like this cheapo did.

[@wookiee87]

Do yourself a favor and put anti seize on the caliper to slide pin bolts and the pad bracket bolts. In your environment you'll be happy you did it next time you do brakes.

[@SSLFamilyDad]

Very good advice!

[@Johnboooy]

great video and well explained through out the process

[@robertbutler8173]

Do you need to torque the bolts down to a specific set amount, or just go by feel?

[@miguelosornia3021]

Love the end

[@skid4482]

@ 10:45 I bent my C clamp trying to make it go back in. What now? Thanks

[@larrya.mccloskeysr298]

One very important thing that you left out you need to pump the brakes before putting it in gear of you can run into something before hou get the brakes on never hit anything but scared myself shen i got in a hurry

[@SSLFamilyDad]

+Larry A. Mccloskey Sr that is a very good point to make! I have actually forgotten myself a few times!

[@larrya.mccloskeysr298]

SSLFamilyDad it is easy when you get in a hurry

[@mclerj0577]

A regular guy with regular tools doing a great job. THANKS SIR. - good vid.

[@maxlove7115]

Good job seemed kind of ghetto but ok.

[@teeb9969]

Anybody can do this? Not me lol!

[@googleaccount-ov3yj]

Tanks for sharing

[@geraldchaplin947]

great video as always i like to watch your videos i think your a great person and a good family man but here is my one comment and hope it doesn't come a cross as negative there is enough of that in the world right now your comment about buying all of your parts on amazon what about the young man that just got a job at the local auto parts store that lives in your community. you want people to buy local Christmas trees

[@SSLFamilyDad]

That is a great discussion to have and I appreciate that point. From a local economy perspective, buying local is always better. But from a sustainability perspective, delivery and ordering online is much more efficient on the whole. What is better - 10 people all go to the store and drive a car 10 miles each to get a part. Or one delivery truck comes from a central warehouse and delivers to all ten people. I think this is one way the economy will change in the future, more delivery drivers, warehouse workers, postal workers, etc. Just a thought but your point is also 100% correct

[@Argumedies]

First break job I ever did was on my 1976 Chevy Chevet back in early 80's

[@quietstorm8230]

I'm all out of vaseline. Can I use Warming KY Jelly?

[@EddieLeeGrovesMusic]

Lol

[@abet4328]

Silicone, yes, water base, no lol

[@Lucentlyyyy]

So is the vibration packets help from kinda like skipping to a stop? I have 99 GMC Sierra and if I’m going like 50 or faster my brakes like to skip

[@scottburrell2729]

Excellent educational video about brakes on Tahoes

[@tc2cool863]

Good job