Рет қаралды 15,468
Buy Now!
New Crankshaft Position Sensor from 1AAuto.com 1aau.to/ia/1AECS00020
This video shows you how to install a new crankshaft position sensor on your 1997-2006 Jeep Wrangler. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
This process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• 11mm Socket 1aau.to/obDV/1AXAA00015
• Trim Tool Set 1aau.to/oagS/1AXXX00006
• Ratchet 1aau.to/obHR/1AXAA00016
• Socket Extensions 1aau.to/obDV/1AXAA00015
• Gloves 1aau.to/oamw/1AXSS00048
• Safety Glasses 1aau.to/oaep/1AXAA00343
• Floor Jack 1aau.to/oabe/1AXAA00068
• Jack Stands 1aau.to/oYg/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.