How to Replace CV Axle Shaft 95-05 Chevy Cavalier

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@jiyushugi1085]

Advice for home mechanics: If you need to hammer the threaded end of a bolt, screw the nut on until the top surface of the nut is flush with the end of the bolt, then hit it.

[@brandonfarley1356]

Doing a transmission swap myself, very helpful video considering this is my first Cavalier swap. Thank you very much.

[@poloact6838]

How did it turn out ?

[@Bobby-ns7gn]

Thanks, Always nice to see your video first.

[@kingofthekit]

I have used MANY of 1As parts and videos and I can't think of a better company to recommend. They really deserve your business. Super fast on the shipping and you should be able to get it free!

[@djsm1rk989]

Use a railroad nail and a hammer to remove your axel if it is stuck. I tried using a pry bar to get it out and it flexed too much for me. Railroad nail popped it right out no problem at all. On my 05 sunfire

[@photoman2004]

You can also remove the driveshaft by loosening the ball joint and dropping the control arm. I think this is a better method, since the shock tower bolt holes are 'oval-ish' and linked with the alignment on these vehicles.

[@BlackLS1Pontiac]

Forgot one of the most important parts. On the automatic cars the passenger side axle needs the small stub shaft transfered on to the new axle.

[@daryljudd4366]

Dude I could not figure out what the heck it was and I have been searching for a week now thank you so much for this helpful hint

[@1AAuto]

@Baffle Dazzle We recommend replacing them in pairs. If one is bad the other usually isn't too far behind it from going bad. Hope this helps you out. Have a great day! 1aauto.com

[@elshiwazsimental]

great video always the best of the best plain and simple and very easy

[@familymanof6169]

Puting the nut back on flush will also protect the threads if you don't have 2 x 4's laying around the shop. Great video though!

[@jeetkunedophysiologymore4221]

Thank you for simplifying this...I've done Cv axles on other vehicles..but not this kind before...lol

[@1AAuto]

Thanks for watching! +Jeet Kune Do Physiology&More

[@baffledazzle4425]

If I am replacing one of the axles, should I replace the other one, too?

[@austinallen8949]

Okay. But why wont you tell us how yo remove the little shaft on the end to put on the new cv axle ?? Nice critical step you just skipped right over ...

[@Badd2dabone619]

RRRIGHT

[@nickyeayea7257]

What¿ Lol

[@lennonrispy3138]

We have been fighting this problem for 3 days now. Just found another video showing how it’s done. 😔

[@i.a.m.m.a.l.a.c.h.i]

@@lennonrispy3138 whats it called ???

[@mjb12141963]

It might be a good idea to mention that the plastic lug nut cap only need to be hand tight to avoid striping them. Many people don't know this.

[@1AAuto]

+ALLxoxoxoxo That's a good tip. Thanks for posting it. 1aauto.com?KZbin&CTA%20Comment&ATony 866-403-3393

[@mjb12141963]

Yeah I had to tell my stepson that for the 200th time today

[@gorillamad7544]

Not so repair Davy but to verify. So after replacing the axels. On either side, the transmission fluid has to me topped off again right?

[@grimreamer2512]

Should you apply grease to the splines to prevent wearing? I've heard conflicting info. Also, what's the best way to line up that retaining clip as you slide it in (likely on my back since I don't have a lift)

[@1AAuto]

If you follow the video you should be okay. You do not have to add grease to the axle. 1aauto.com 866-403-3393

[@1AAuto]

If you follow this video you should be able to make this repair yourself. We carry the part on our website 1aauto.com 888-844-3393

[@davidsolis7267]

will it need to be service alignment If I already got my steering wheel alignment again on my 03 Chevy Cavalier Ecotec ? Will it break if I dont get them replace for another month or will it just gather dirt into the CV joint time to time ?

[@keithreinsel7842]

This was a massive help! Thank you!

[@1AAuto]

+Keith Reinsel Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@josephpilmanphotography]

him:removes it like cutting paper me: GET OUT YOU STUPID THING!!!

[@p0k7lm]

THANK YOU for making this video .I have a 2003 cavalier with ecotech 2

[@1AAuto]

You're welcome! 1aauto.com 866-403-3393

[@davidm.christopher5190]

Does all axles for the base model cavalier need cerclips?

[@horatiohuffnagel7978]

The fluid that leaks out. Is that gear oil or transmission fluid. Ive been looking it up and its says my 03 cavalier uses ATF dex 3 equivalent which seems weird. Putting ATF in a standard but two sites say it. Valvolines site and one other fluid maker.

[@nickyeayea7257]

Smell it

[@1AAuto]

Thank for watching. Have a great day. 1aauto.com 888-844-3393

[@donaldjones2394]

did you also replace the strut, it looks new

[@JohnBindon]

What is the specific name of the "clip" that is already inside the transaxle that is mentioned around the 4:54 mark to the 5:00 mark ? I believe he said [it locks the transaxle in place]. Thanks much in advance folks !

[@georgeeady6357]

i do like this i do wish i seen it befor i started on this project .would have been 1/2 the work . will know where to ook nextime

[@robthezombie9573]

I have a 99 cavalier and realy short on money do u think i can do it myself or do u highly recomend a Mechanic?

[@ryanvanderveer963]

1a Auto....What brand of torque wrench do you use?

[@DorendaMoniqueClink]

Approximately how long did this replacement take?

[@1AAuto]

Since the video is from 2013, it's hard to say how long it took us to do this job. But typically, this will take your average home mechanic maybe 4 hours, give or take an hour for trips to the store. Buy your auto parts from 1AAuto.com?KZbin&CTA%20Comment&ATony

[@jesuscamacho6173]

Can you do a how to video on how to replace the Front Spindle to a Chevy Cavalier please! Thank you!

[@tyrellswappp]

Said nothing about the oil seals, otherwise a great instructional video

[@rcblevins6237]

Thats what i was just abouy to comment about

[@dillonblair4450]

I replaced the axle in my 96 cav on the left side and ever since then it’s been rattling and smells bad.

[@kingofthekit]

It's it essentially the same if you have a 4 speed automatic?

[@jesusamador1362]

On the left side you cant see the part of the axle to pry it off so how do you get the axle off.

[@ryanfabich8873]

Is there a "stub shaft" to remove?

[@gerwinrebalde2500]

Hi 1A Auto team, Im using 94 chevy cavalier. i would like to know how much is the complete set driver and passenser CV axle set? im currently residing in Jeddah, KSA Kingdom of Saudi Arabia. how much is the shipping cost and also the complete CV axle set?

[@1AAuto]

+Gerwin Rebalde Thank you for watching, but unfortunately we do not carry CV axles for a 1994 Chevy Cavalier. If you are interested in getting parts shipped to you in Saudi Arabia you will have to go though our eBay listings. From there you can calculate shipping cost!

[@tennesseebubba4220]

Do you compress the suspension coil?

[@glennmanchester1568]

I didn't see you torque the 30 mm nut on the axle .. but anyway I've got one I can't get it out of the transaxle idk why any suggestions?

[@1AAuto]

+Glenn Manchester Thank you for watching. To remove the CV axle from the transmission you will need to take a rubber mallet or similar and from the backside use some force. This will "pop" the axle and locking ring out of the vehicle for replacement. Depending on if your vehicle is a 1998 - 2001 then the torque should be set for 144 ft lbs, and if your vehicle is a 2002 - 2005 then you should torque the 30mm nut to 148 ft lbs. 1aauto.com

[@maz4002]

Great video but mine won’t go in that easy. It’s all cleaned out, new seals, splines are lined up. The clip is giving me issues

[@caayydenn]

Use a shit ton of grease to help keep the ring in place when you're trying to insert it. Although you probably have it done by now, for future reference.

[@JonDoe-007]

Wish you would've shown how to change the axle seal too

[@1AAuto]

+Jonathan Tejada Thanks for the feedback!

[@honda954]

Does the axle have to be pressed on?

[@1AAuto]

It should go back together as shown in the video.

[@kingofthekit]

The same for 4 speed? It appears to be the same on my 2002 but I think mine is a 4 speed.

[@pbmanf1]

Totally forgot that they screwed up the wheel alignment

[@dannythomas6194]

Thanx!

[@InsaneMex]

Good Videos :) Thanks.

[@haroldsmith4071]

Do you have a video for a 2000 Impala

[@1AAuto]

Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. Thank you for watching! 1aauto.com 888-844-3393

[@sylanderhopkins6665]

Pretty simple

[@c.rooster5166]

Awesome. Thank you.

[@1AAuto]

+c. Rooster You are very welcome! Any other viewers interested in purchasing these parts please visit the link below. www.1aauto.com/1A/axles-and-axleshafts/Chevy/Cavalier/CAACV00027?KZbin&CTA%20Comment&

[@1AAuto]

It should be the same process. 1aauto.com 888-844-3393

[@John-ri7xl]

this was done wrong