How to Replace Drive Belt Component Kit 2010-2013 Ford Transit Connect 2.0L

Buy Now!
New Drive Belt Component Kit from 1AAuto.com 1aau.to/ic/GAEE...
This video shows you how to install a new tensioner pulley and serpentine belt on your 2010-2013 Ford Transit Connect .
That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage.
This process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect
Tools you will need:
• 10mm Wrench 1aau.to/oLG/1AX...
• 15mm Wrench 1aau.to/oLG/1AX...
• 10mm Socket 1aau.to/oaLT/1A...
• 15mm Socket 1aau.to/oa3W/1A...
• 8mm Socket 1aau.to/oaLT/1A...
• Socket Extensions 1aau.to/oa3W/1A...
• Torque Wrench 1aau.to/oamw/1A...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@alexandersteffen7805]

in order to replace the idler pulley you have to remove first the tensioner right?

[@jeremykrasnodemski2033]

Is there a way to do this without having the van in the air and removing a tire?

[@BillyStanley]

Thank you so much.

[@prisalexramoz6120]

Thanks

[@JAI45624]

GOOD VIDEO

[@Rctrx4m]

Hi, would this be the same process for the 2005 connect also

[@TRQ]

+@Rctrx4m This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

[@brunosilvestre455]

Thank you

[@Redgotsticks]

😊