How To Replace Driver Side CV Axle 2007-2012 Nissan Sentra

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@nop58653]

I like the five lug to 4 lug conversion at 0:20

[@roylopez5416]

Straight, direct videos love these thanks a bunch can you make one of 11 Sentra transmission removal and replacement

[@RMalai]

thank you for showing. I was told if they are bad the car would shake at high acceleration. is that true? I had the alignment done, but still did not work well. still shaking. this car has those new shocks and now new axles. good to see car being taken care well.

[@Z33karate]

Oh nice a 7 minute job…. 7 days later . All done ✅

[@josefranciscoesquertalaman3827]

Presente en clases de mecánica automotriz en TRQ, mirando en Navojoa Sonora México, gracias por compartir información que ayuda 🎉

[@JonMichaelDeShazer]

How on earth did you pull that CV joint out of the transmission so easily?

[@stevebalistreri]

Thanks for the video! Did you have to top off the trans fluid after? Mine has the CVT. Thanks!

[@yoloreverse9124]

I WANTED TO SEE THE INNER PART THAT GOES INTO TRANSMISSION, IS THERE A MEDAL RING, NO AXEL SEAL NEEDED?

[@miguelcalmo2005]

Can you use a different anti seize on the spline or does it have to be copper never seize

[@miguelcalmo2005]

Is there supposed to be a gap between the cv axle and the transmission or does it go right against it ?

[@carlosmad2357]

Would this be the same on a 2016 Nissan Sentra?

[@primus699]

What happens if some of all transmission fluid, spills out, do I have to replace transmission fluid

[@pablojunior8333]

Yes, after the job, check the level of Transmission fluid and complet with the amount necessary

[@lowspeed2000]

Do you need to lube the spline that goes inside the transmission?

[@Sroor90010]

You don’t have to remove link stabilizer like maxima and Altima?

[@miguelcalmo2005]

Would this be the same process on a manual 2007 nissan sentra 2.0?

[@skylarford4568]

What if I try to take off the cv axle bolt and the whole cv axles spins with the wrench?

[@shukhrattursun]

The Axle Nut needs to be removed before rasing the front of the vehicle or somebody needs to press and hold the brakes, which might not be eficient and safe and might damage the transmission.. grounded and parked vehicle with hand brakes on worked for me..

[@inkpirate_tattoo]

Make sure you PB blast all your bolts prior or have an air gun for your axle nut

[@MrJ-bz8fe]

Wheres the video for the passenger side?

[@NeutronX101]

Why do some have ABS ring? Is that required for cars with ABS?

[@davidm3210]

The ring is required for ABS. If you don't have ABS and it doesn't interfere with installation you can just keep it on.

[@davidm3210]

Old boy works as fast as he talks. Red thread locker? Cheers!

[@TRQ]

+David M Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@phlyq4130]

Can this be done with hand tools?

[@chriscastonguay2086]

Yes

[@davidm3210]

Yes, but you will need at least a 1/2" breaker bar and quite possibly a "cheater" (a pipe to extend the bar) in order to remove the axle nut. Soak it good with PB Blaster or WD40 first.

[@bobthebuilder9416]

No one shows putting the fluid back in

[@kinmwise922]

Cool Bananas😊

[@lowspeed2000]

This shouldn't change the alignment though

[@mustangdanny97]

Yeh right.these Nissans are a joke.it is not that easy pulling the axle out.im still fighting it.i guess I'm gonna have to buy one of those cv puller tools. These videos always make it seem so easy.