How to Replace Electric Fuel Pump 2000-2006 Toyota Tundra

Buy Now!
New Electric Fuel Pump from 1AAuto.com 1aau.to/id/DEFP...
This video shows you how to install a new electric fuel pump from TRQ on your 2000-2006 Toyota Tundra. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• 10mm Socket 1aau.to/obgw/1A...
• 14mm Socket 1aau.to/obA8/1A...
• 7mm Socket 1aau.to/obgw/1A...
• 8mm Socket 1aau.to/obgw/1A...
• 1/2 Inch Ratchet 1aau.to/oakH/1A...
• 1/4 Inch Ratchet 1aau.to/obgw/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obA8/1A...
• Socket Extensions 1aau.to/obA8/1A...
• Torque Wrench 1aau.to/oaJT/1A...
• Gloves 1aau.to/oagX/1A...
• Safety Glasses 1aau.to/o9T/1AX...
• Pick 1aau.to/oRu/1AX...
• Ratchet Strap
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Aldod24]

I would be alot easier if just unbolt the bed and replaces from the top

[@TRQ]

+Daniel sandoval Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

[@jimalcott760]

Doesn’t it need a new gasket at top of tank?

[@norcoauctions]

east coast mechanics are bosses having to deal with all that freaking rust

[@anthonyleon795]

I own a 2006 Tundra and the fuel filter is supposed to be located in the gas tank, according to the Toyota mechanics. 2005 and earlier had it outside the gas tank on the fuel line. Wouldn’t the parts be different than the video uses? Is there another video for the 2006 model?

[@alexispagan4644]

Do they all come electronic

[@michaelaskins8860]

Excellent video

[@shanedubray1388]

Im dealing with a crank no start on a 2006 Tundra Double Cab 4.7, I’m not getting fuel, checked relay and pump, it’s good, checked crankshaft position good, just running in circles, not getting a signal at FPR pin (red green wire that goes to FPR) at PCM but I’m getting Power at the FPResistor Feeling a bit defeated on it Someone mention Tansponder, Immobilizer, just lost on my diagnosis

[@austinsoutdooradventuresan2338]

You could also just cut a hole above the back seat and replace it 😂😂😂

[@twc20031985]

I believe the 2005 and 2006 use the same style pump as the 2007 with the plastic threaded ring. But i think the tank removal is pretty similar.