How to Replace Emergency Brake Shoes and Hardware 2007-2013 Mitsubishi Outlander

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/254/W...
This video shows you how to install emergency brake shoes and hardware on your 2007-2013 Mitsubishi Outlander.
This process should be similar on the following vehicles:
2007 Mitsubishi Outlander
2008 Mitsubishi Outlander
2009 Mitsubishi Outlander
2010 Mitsubishi Outlander
2011 Mitsubishi Outlander
2012 Mitsubishi Outlander
2013 Mitsubishi Outlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaY4/1A...
• 14mm Socket 1aau.to/oaZz/1A...
• 17mm Socket 1aau.to/oaZz/1A...
• Brake Caliper Hanger 1aau.to/ogf/1AX...
• Locking Pliers 1aau.to/oik/1AX...
• Needle nose pliers 1aau.to/ow7/1AX...
• Needle nose pliers 1aau.to/ow7/1AX...
• Torque Wrench 1aau.to/oajz/1A...
• Brake Grease
• Gloves 1aau.to/owH/1AX...
• Safety Glasses 1aau.to/ori/1AX...
• Silicone Paste
• Floor Jack 1aau.to/oN2/1AX...
• Pick 1aau.to/oDi/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/opy/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@michelgelinas9423]

Very important note about ordering SHOES :168mm (#886) is for 5 passengers and 190mm (#887) is for 7 passengers (seat in the floor !), I did the mistake with the short one on my 2010. Great video.Thank you

[@fleekdmyseed4151]

Great video. Same for my 2010 lancer. Thanks

[@stab952]

Bardzo fachowo, krótko na temat. Dzięki

[@tmelectricaltutorials2851]

thank you for this video now i learn i will do it to my car next summer

[@coltonmaske]

So the 2012 Eclipse is very similar but kind of harder. You must take the hub off and install like the video.

[@memphis3748]

Thx man, helpful 👍

[@AlphaGametauri]

Wish i could find a vid on how to do this on a '05 Chrysler Pacifica Touring

[@leoelledge7676]

My hub is in my brum and is different what do i do

[@jonny1943]

I was about to fix my 2011, so i noticed that mine had a inner radius of 168mm and the parts i have bought is 190mm, i cant find any info about this online...does anyone have any info about this? Thanx!

[@filw3522]

Was never sieze used as the guide pin lubricant?