How to Replace Rear Brakes 2007-2013 Mitsubishi Outlander

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS03604
This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-2013 Mitsubishi Outlander. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2007 Mitsubishi Outlander
2008 Mitsubishi Outlander
2009 Mitsubishi Outlander
2010 Mitsubishi Outlander
2011 Mitsubishi Outlander
2012 Mitsubishi Outlander
2013 Mitsubishi Outlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaY6/1AXAA00013
• Pry Bar 1aau.to/oHC/1AXAA00020
• 14mm Socket 1aau.to/oaZB/1AXAA00015
• 17mm Socket 1aau.to/oaZB/1AXAA00015
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oau/1AXAA00288
• Brake Caliper Hanger 1aau.to/ogg/1AXAA00084
• Needle nose pliers 1aau.to/ow9/1AXAA00051
• Needle nose pliers 1aau.to/ow9/1AXAA00052
• 1/2 Inch Air Impact Gun 1aau.to/onj/1AXAA00252
• 1/2 Inch Breaker Bar 1aau.to/opr/1AXAA00078
• Ratchet 1aau.to/obdy/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaZB/1AXAA00015
• Torque Wrench 1aau.to/oajB/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/owt/1AXSS00035
• Floor Jack 1aau.to/oN4/1AXAA00068
• Hammer 1aau.to/oKx/1AXAA00091
• Jack Stands 1aau.to/oKJ/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/opA/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Mitsubishi Outlander 2007-2013 2nd Generation: • Mitsubishi Outlander 2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@vincentrivas3702]

VERY GOOD VIDEO DETAILED AND FILMED LIKE A PRO. YOUR THE BEST VIDEO.

[@matthastings55]

What is that spray can brand? For that aerosol copper anti-seize.

[@anandkazanka2438]

Thank you great video. I’ll do brakes soon. What did you do after 9:00. You said will go to bleeder screw… What did you meant by that, didn’t show on the video?

[@TRQ]

+anand kazanka The Bleeder screw is located on the Caliper.

[@keithinman9859]

What's the purpose on taking the caliper bracket off

[@user-sz3qf4xk2b]

I just followed your videos for my front and rear brake pads but my brake pedal feels looser than normal. Do I need to do anything?

[@K1NGPUFF]

Good video tho i give you 3.5/5