HOW TO REPLACE ENGINE COOLANT TEMPERATURE SENSOR 2012-2018 FORD FOCUS 2.0L FAST & EASY!

HOW TO REPLACE ENGINE COOLANT TEMPERATURE SENSOR 2012-2018 FORD FOCUS 2.0L FAST & EASY!
Hey guys! In this video we show you how we replaced the engine coolant temp sensor in our 2015 Ford Focus!
The vehicle wouldn’t read the temperature!
After a few minutes it’s done!
Super easy job!
Hope you learned something! Don’t forget to like and subscribe!

[@JohnnyBlaze6954]

Thanks for taking the time to make this video! Just ran FORSCAN, tying to diagnose why my AC blows hot, and this code popped up!

[@joemartinez6182]

great video now I can do it, cause I didn't know where the sensor was located, thanks a bunch...................

[@SSSpiller]

I realized that you can make the procedure without taking out the air box. You just gotta know were the sensor is and have your left arm and hand reach the sensor from behind. Great video anyways!

[@Fifth313ment]

Yeah, I checked like 5 videos and this guy had the best angles to see everything which deserves a thumbs up IMO! Thanks again! Edit: The location is also the same on the 2012 to 2014 model focus also.

[@scarcxy]

Thanks man for this great video. I've subscribed to your videos.

[@frankhutchison2382]

Thumbs up for the clear concise info..What would be the situation that requires it replacement.!!

[@jameslaiola4976]

Thank you so much

[@samanthacastro4171]

Do y'all have a video for 08 Lincoln mkx engine coolant temperature sensor

[@sytema]

Does this car comes with 2 coolant temperature sensor????

[@SouthwestSasquatch]

Cool shit man! 🤘

[@largeking2018]

Thanks for the video! It helps me a lot!

[@agro9999]

I need to do this to my 2013 ford cmax hybrid. Can you please tell me the location? Or do a video

[@tuvalk5965]

Thanks, but csn i reset the sensor after the replacement ? Now i have a fault light... and can not moving, hope for help.

[@Getmoneygangster1]

Bro where do you get that clip from

[@bigjohnson7415]

I just changed mine without taking anything apart. I just reached around from behind with my LEFT hand. Had it out and back in in 2 minutes.

[@crystalcantu472]

Thank you

[@juanjoalbarello442]

Good morning, how do I know if I should change the temperature sensor? What I see is that when I start my vehicle in the morning the needle goes up somewhat quickly to the middle but it never goes beyond that no matter if I drive a lot or leave the car running for several hours on a hot day... or that could be a symptom of the Thermostat that is failing?

[@soberaddict2275]

why would you think that mean that the sensor is bad?

[@hansiman9262]

hey are there 2 sensors? one for measuring for the instruments and another that switches the cooling fan on off? do you know where the second is?

[@cyril5077]

I also think so, because on my s-max 2.0 145 ODB & gauge show not the same temperature... but I can´t locate...

[@ThatWorkx]

That would be the radiator cooling fan module which relays all that information to the fan to turn on and off at particular temps

[@tPsychedelic]

Just subscribed to your channel. Is it the same for 2014 Focus st

[@Bodacious_Bob420]

@TpsyChedelic Chingon I was thinking the same man. And I’m pretty sure it is

[@mariosuarez547]

Do u have the part number

[@miguelsalgado4673]

What was the issue that made you replace it

[@miguelsalgado4673]

@Jimmy S i fixed the issue about a month ago,I noticed that the fan motor wasnt getting 12v to the module, so i went hunting for big fuses, and its in the battery cover fuse 8 which is a high current, and a loose wire in the fuse box underneath, where you will find more fuses

[@hopedenise448]

Can i unplug the transmission temp sensor and leave it unplugged

[@HidalgoMotorsCo]

If you feel like you must do that. By all means do so but be sure to plug everything back up the way it was to make sure it all works properly

[@jimborambo5866]

I have a 2007 Focus and the fans don't come and bubbles over and only comes on when the A/C is on. Will this be the culprit?

[@alienchannelson.1765]

Lo solucionaste?

[@jimborambo5866]

@@alienchannelson.1765 No

[@julianoputraperdana1295]

Hi man, mind to share the part number ? It really helps. Thanks

[@HidalgoMotorsCo]

I suggest giving the dealership a call and give them your vin number for the exact OEM part number :)

[@HidalgoMotorsCo]

Thank you for watching 👀

[@cLaUdiALeE77]

Could this be the reason why the coolant fan stays on while the vehicle is off??

[@Northwesternforcefield28]

That sounds like a fuse- what did it end up being?

[@thatsportsman570dude5]

Also curious what the fix was

[@christopherbrown2916]

You can do this without taking out the air box if you just reach from behind with your left hand, the box coming out was so not needed and a huge waste of time

[@doriansantana9420]

Is it the same for an ST model

[@blarest6726]

Did u find it?

[@doriansantana9420]

@@blarest6726 yes

[@elmerrodriguez9894]

Don't do that! lol

[@ephraimmiller9272]

OK... I did this. I pushed the sensor in as hard as I could and put the retaining clip in. I could feel that the clip was in the right place. Yet, a week later (today), it popped out while driving. I put it back in and filled up with water to get home. As I pulled in to my spot, I saw steam, and realized it came out again. I bought a new clip and put it in, but now I am really worried. Anybody have the same problem or know why it came out?

[@sdiaz2k]

sometimes the sensor is manufactured in a concave shape , so you need to replace the clip the same way it was (upright or downwards).

[@jefffontenot4551]

Dumb@ss Ford engineers should have put threads on this, instead of that clip. I had to already replace their clips on on the water heater hoses with real hose clamps. Thanks for the video

[@HidalgoMotorsCo]

Seriously.. those clips were garbage lol but oh well.. gotta keep mechanics in business right? Haha- hey thanks for watching. Don't forget to like and subscribe to help your boys out. Thanks

[@scottykilmer1094]

And remember guys? Dont buy those cheap brands like Facet, Epc, Maxgear or whatever .. 😅 Buy the genuine Oem Bosch or Siemens!

[@DrPiano11]

Removing the intake is not at all necessary.

[@Pest-s5d]

Единственное видео где я нашёл ебучий датчик,но я его заменил не снимая короб

[@HunterLeeBeane-to1ot]

That’s how your properly make sure any sensor sensitive to coolant fail. Sure why not get coolant all over Your manifold and converter that’s a great video bud. Your a noob and shouldn’t be working on cars.