How To Replace Engine Water Pump 2004-2012 Chevy Colorado

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@hcaveman6954]

What was that tool 🔧 you used to break the fan clutch loose off ? 🤔 ?

[@carlfister7053]

Air hammer. It is a thing not pulling your leg. Life changing tool if u work on stuff alot

[@EPICYELLOWHORSE]

Ha! I came back to ask the same question. Thanks!👌🏾

[@Alan-mr5zz]

I did this job here are some additional details. The clutch fan nut needs a 36 mm clutch fan wrench. You can buy this at Advanced the one I used was made by Lisle. O'Reilly's also has a universal tool. I would not recommend using a loaned product as the loaner tools are bent out of spec.

[@Utubegofukurself]

Nice radiator hose "tool" lol. Goes straight back to the tool thats actually works haha

[@TeZNight]

Thank you for the video. I replaced mine today using your advice. much appreciated

[@tomp3346]

Wondering if you're sure about the 89 inch pounds spec, I've also seen 14 foot pounds in a post I read. Thanks for the video.

[@Eric48634863]

Thanks, this is a good video with a good explanation and video.

[@williamphillips997]

Use the correct gasket remover and a plastic razor blade. Sanding on aluminum mating surfaces can cause low spots, that leak.

[@juliarich-mccarty3190]

Thank you, great video.

[@Ash_Sharn_vlogs]

Very helpful video 💯

[@Jagueyes1]

VERY well filmed and explained.

[@TheOldBailey4135]

I did this recently and the special tool from the auto parts store, being thin and the nut being on for many years, did not work. So i had to remove the pump, pully and fan as a unit, not easy nor fun. I had to cut the pump apart with a right angle grinder, then get a pipe wrench on the square fan nut, it finally came apart.

[@tylersturguess8644]

Do y’all have a video doing a crankshaft seal on same model

[@japhethbetts4236]

Thanks for the help much appreciated love

[@liftprosper4934]

Yeah, don’t show breaking the clutch fan loose. 🤮

[@wayfararout6258]

Looks soo easy

[@J560iH]

Thank You.

[@RoqueZuniga-ff1ms]

What year is this model of truck ?

[@BryanKelley-l9e]

Are we sure it’s counter clockwise?

[@henrygallardo1969]

You guys need to specify what kind motors y’all are working on.

[@luigiprovencher]

So that hose clamp tool was pretty useless.