How To Replace Face Bearings of An AIR Wind Generator - e Marine Systems

[@molteni54]

I followed the video and replaced the bearings easily, thanks. Points to note are that the hex bolts are all Imperial. I didn't have a hex spanner for the 3 wire connections but managed to do the job with the wires in situ. Took the 2 (Chinese!) bearings to Bearing Warehouse and they quickly came up with SKS equivalents for £12. For reference they are 6203 ZZ and 6203 2RS , identical except one has the plastic shield as per the video. A nice simple job!

[@svbarryduckworth628]

What are the symptoms of worn bearings? Mine just started to make a weird vibration today. Blades not damaged and less than a year old since they were replaced. Is it bearings or a fault in the electronics? No crunchy squeaking noise and the vibration came on suddenly over the course of a windy morning. The blades and rotor seem to be tightly fastened still and I'm not feeling any undue slop anywhere or dragging when I rotate by hand. No slop in yaw bearings either.

[@martyntozer6789]

Very clear instructions where can I buy these bearings

[@armandoac1334]

Great video, thanks

[@Ra40Rob]

What are the Allen key sizes? Specifically the wiring connector.

[@SVPearler]

@Will he heck as like ended up doing it without removing wire connections. Did not have access to imperial Allen keys. The rest can be done with metric.

[@bernardlash4169]

Does anyone make longer blades for this unit?

[@96MustangBoy1]

Is this wind turbine same as the sunforce?

[@chrisrobinson6994]

Hi, where do I get replacement bearings for my AIR 403? Thanks

[@sailzazen]

I also did like to know the model number of the bering...

[@vadivelanellappan42]

wow pcb inside turbine? new info, anyone explain about this pcb?

[@Marc.Lanting]

internal voltage controller

[@thedavesofourlives1]

DC output

[@donaldsmith3048]

Why does everyone think that they must put music in the videos? It sucks, it some times makes it hard to hear.

[@nazimozturk3160]

Why are you removing the bearings of the original system? How many volts does that system produce? How many rpm does the system produce? How many volts? Explain first, then do everything.

[@michaelosborne3963]

Lose the music - it's distracting.

[@techmanni384]

We produce our own energy supply. The solution is the Papziati Energy system online. It is the best way to produce your own electricity. Just start looking in the search engines.

[@ducaschoenberg7156]

Make it yourself thanks to inplix page. I think it's the best way to learn how to build it in the cheapest way.

[@egorbiletskiy2950]

I found a detailed and accurate project on the Avasva website.

[@jaroondamdaeng9747]

Xee

[@romanaangersbach1176]

IF you want to make it by yourself just go to InpliX page.