How to Replace Front Brake Calipers 1994-2004 Ford Mustang

Buy Now!
New Brake Caliper Set from 1AAuto.com 1aau.to/ia/1ABCS00322
This video shows you how to a front brake caliper on your 1994-2004 Ford Mustang. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Ford Mustang
1995 Ford Mustang
1996 Ford Mustang
1997 Ford Mustang
1998 Ford Mustang
1999 Ford Mustang
2000 Ford Mustang
2001 Ford Mustang
2002 Ford Mustang
2003 Ford Mustang
2004 Ford Mustang
Tools you will need:
• Pry Bar 1aau.to/o4z/1AXAA00020
• 10mm Wrench 1aau.to/o78/1AXAA00010
• 11mm Socket 1aau.to/obTU/1AXAA00015
• 12mm Socket 1aau.to/obTU/1AXAA00015
• 15mm Socket 1aau.to/obTU/1AXAA00015
• 19mm Socket 1aau.to/oaw4/1AXAA00043
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaJ/1AXAA00289
• Trim Tool Set 1aau.to/oapU/1AXXX00006
• Ratchet 1aau.to/obWF/1AXAA00016
• Socket Extensions 1aau.to/obTU/1AXAA00015
• Torque Wrench 1aau.to/oaZB/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oaJY/1AXSS00048
• Liquid Thread Locker
• Paper Towels 1aau.to/oJP/1AXSS00035
• Safety Glasses
• Silicone Paste
• Drain Pan
• Floor Jack 1aau.to/oaoM/1AXAA00068
• Jack Stands 1aau.to/oabd/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Jman-mb6ru]

FYI: You put the brake pads on the wrong sides. There are 2 little pegs in the middle on the back of the brake pad that will destroy your caliper pistons. The pad you put in front has those pegs on the outside corners to prevent damage to caliper.

[@calilife9672]

I’m about to install my driver side caliper soon. Do we have to torque down these bolts to speck? I don’t have a torque wrench and every time I change the pads I just use my regular wrench?

[@maddie35666]

Thank you so much for everything you do! 😀