How To Replace Front Brakes 1997-2004 Dodge Dakota

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@Dan.Parker]

Seriously love this channel. Y'all always have a video for the vehicles I am working on!!

[@williamcox2996]

great video Excellent teaching ability, unlike many others in auto repair

[@designertjp-utube]

Hi! Thank You for the Front Brake Demo1 Very therapeutic and psyched me uo to brake attack my 2004 Dodge Dakota. Had to watch your video twice to see your front "HUB" install was probably a whole other video. Before I watched this vid again, I was worried your whole front wheel came off (with the tight lugs included) and rolled away as soon as you made a right hand turn. As they say in Spanish here in los angeles: "Soy Listo por aqui!" Gracias!

[@masterofnonetv8361]

Put the lug nuts on to protect the threads if you have to hit it with a hammer and before you remove the caliper stick a screwdriver between the the inside pad and the rotor and pull backwards and it will push the piston back in so then you dont have mess with a tool to push it in when it's off but it's going to push fluid back into the reservoir so be prepared for that.

[@lbeh8652]

you forgot anti vibration spring

[@JTC-go3kg]

Have you replaced front abs sensors on these

[@user-gn5uy6lx7z]

On the break is a 7mm allen. I have a problem. One of my bolts is loose but spinning and not backing out . Is there a trick to getting this out? As you know I can't take the break off the assembly until that comes out. Any help would be great and if you already have a video fixing this please send me the link. Thank You

[@92clintonr]

This is only viable from 97-02. 03-04 are a different setup.

[@eq2695]

Don’t forget to open the brake reservoir

[@bocefusmurica4340]

My 2000 pads have clips on the end.

[@HappyHands.]

Did you purposely leave out that awful caliper spring?

[@et784]

Thank you

[@AttorneyBCollins]

I actually came to see how you put the big anti vibration clip on. Nobody shows the actual installation though some at least put it back on. You guys are usually good about doing it right. Not this time.

[@charlottebiker365]

thank you sir!

[@ORylee]

Not putting the clip back on the caliper is crazy

[@DanGiltner]

Not 7mm but it is an Allen key

[@jeffreymoore7729]

Seriously the whole point of this video was to watch you get the hub off of the truck, you completely skipped that part so it must be that tough Eh' ?

[@Silkkspyder44]

Man these ads are getting ridiculous

[@lisaworleyable]

Ur not showing how to install brake hardware thats a HUGH B#@*% TO GET ON !

[@juanmespinoza65]

Wrong bakes for the 4x4