How to Replace Front Brakes 2015-2019 Hyundai Sonata

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@tlynn609]

This was by far the best video & most detailed video I've seen on KZbin explaining how to change brakes!! Thank you!!! Edit: I'm female & went off your list of tools & everything needed to get the job done & I changed my front & back brakes & rotors for first time in my life with no problem. Only thing that ended up being a little bit of a struggle was not being strong enough to get some bolts unscrewed so I just wd40 them & waited a few & piece of cake. I was quoted $800 for front/back brakes/rotors (i swear cuz im female mechanics try to take advantage of that). It ended up costing me $285 for parts & a little less than $100 for tools so now in future all I need is parts. $385 compared to $800 which is like $200 each brake/rotor & I coulda got shit brands but I got one of the top of the line brake sets. Thanks again for the detailed instructions!!

[@peterfrey1853]

I like how the tire went back on with the old dirty rotor in place… The torque specs were a nice touch! Thank you.

[@tonyman2c]

I think very few shop will be willing to spend the time cleaning and lubricating the caliber pins like you did. That's why I wish I could change my own brakes. 😂

[@murphsosaaa6534]

if you don’t have the piston presser tool, u can also use a C clamp and put the old brake pad against the piston and compress it tht way💯

[@yourfactstory]

Thanks my friend but why you have back the old rotor at the end ?? ...Subscribed !

[@Bryangarcia-go5un]

Wouldn't cleaning the rubber with the brake cleaner cause the rubber to deteriorate faster over time?

[@jamesspalding3981]

Cam I use a big C clamp to push caliper back

[@bcchristopher688]

No grease where the pads slide in the hardware or where the caliper hits the pads?

[@johnrogers5264]

Where did the new rotor go? Curious 🧐

[@crazyloco8844]

Excellent job!!! Love the way you explained everything. Thank you.👍💪

[@javiergonzalez6920]

Question: Is it a bad idea to open the brake fluid can lid to compress the calipers at installation time instead open the caliper drain plug?

[@jmrandom194]

Good video, but NEVER put antiseize on your wheel studs. That will result in pressure against the threads well beyond specs when you torque the lugs. That's why it's best to use antiseize from a jar with an applicator brush vs aerosol. Otherwise good/detailed video.

[@Brooklyn1530]

6:00 I heard that laugh lmao.....hit it from the back....giggity

[@hoosiermad8753]

Would this work on a 2021 hyndai sonota?

[@edwardsarah957]

You're an OCD Maniac. I Love it!!

[@gustavorangel2533]

The disc rusted while I was checking the brake league hahaha

[@cleewert]

Nice work, it helped a lot, major components needed to this is patience and being handy with tools otherwise I suggest you go to a shop! Brakes are a difference maker,,,, You need to be able to stop!!!!!!

[@jackbuehler9478]

Why you have the old rotor on when you're putting the tire on

[@jeffcon123]

I’m fixing to do mine, rotors are still in shape so.. I just needed ro double check the process I plan to clean it all and make sure it works great

[@dontdoxmebro]

Why didn't you install the brake pad clips?

[@gregsexton6544]

Was there someone holding the pedal down after you pumped your brakes for bleeding the air. Not real clear how you did that? Like the video.

[@SJoyy]

How much does that cost ?

[@juanarevalo686]

No brake pad clips?

[@one2omg154]

Outstanding and thorough. Thank you!

[@adamcoss7533]

Does anyone know where to buy the spray on antisieze?

[@iamrainaab2127]

I have brownish colored rotors 😮 Does that ,mean anything ?

[@CalkoLouie]

Great Video well done

[@raultellez7497]

Very. Helpful. Thank you.

[@LoveWins]

Those are some crusty calipers for only being a 2015

[@rareairentertainment2794]

Wow what a great video

[@MrSilvervw]

Fantastic content 👌 👏 👍

[@noexplanation4343]

NGL.. I thought it was the same piston compressor used on a dodge charger. Didn't have it nor did I open the bleeder screw, and was still able to grip the piston with my hands, until the piston was compressed enough to finish the job. Not bad. Some sore forearms tho. Feel like thats better than possibly letting air in. Leave it closed use man power and get it done.

[@noexplanation4343]

Maybe I could of used that tool, either way

[@DaddyChriis]

Love the work!!!

[@tonyclauson5111]

You don’t need to bleed the brakes. Otherwise, great video

[@DeadCelt]

Where does this person live to have so much dang rust?

[@williamcollins4545]

Man I’m glad I don’t live in the rust belt

[@DeadCelt]

I think your lug nuts were over torqued. Bad thing about using the drill to initially tighten them

[@Bamalinebullys]

Ah that’s why my breaks are still squeaking I put the squeaky indicator on the outside 😅 time to flip them over

[@jeremywolfe6916]

I’m replacing the rear brakes and I don’t remember if the caliper bolt with the black rubber piece on it , goes on the top or bottom of caliper

[@bigotonbrand]

18:35 70ft lbs

[@cbnx82703]

Pry Bar ? How about a 1/2” Drive Breaker Bar instead…!

[@corygraves6480]

Who ever this car belongs to must don't drive it the rotors are rusty