How to Replace Front Passenger Side Engine Mount 2006-11 Honda Civic

Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ib/1AEMT00317
A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts. This video shows you how to install a new engine mount on your 2006-11 Honda Civic.
• Check here for more videos on the 2006-2011 Honda Civic! • Honda Civic 2006-2011 ...
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• 14mm Socket 1aau.to/oa/1AXAA00015
• 17mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Swivel
• Block of Wood
• Brake Parts Cleaner
• Liquid Thread Locker
• Paper Towels 1aau.to/oa/1AXSS00035
• Jack Stands 1aau.to/oa/1AXAA00065
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Honda Civic 2005-2011 8th Generation: • Honda Civic 2006-2011 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@twostep1933]

Noticed a knocking noise in my wife's front end and immediately thought, sway bar link... strut... ball joint.... never would have thought it'd be the motor mount! Doing the repair this weekend. This video likely saved me a few hundred bucks :) Thanks!

[@cognac8297]

I did mine. And I wasn't sure if the car was still running at the red light after I installed the OEM hydraulic mount .wow

[@sickhop831]

thanx for the help just did mine today on 07 civic si great video btw

[@ronymorales3527]

Great video You guys are amazing

[@JTrippBeatz]

Stripped the bolt that goes into the engine bay on the small silver bracket what do I do now ? Threads are messed up?

[@jimmyjammer3660]

Does this process work for an 08 civic hybrid as well?

[@erfantossi4895]

Thanks very useful!

[@gloriagiacomina6720]

How do you do the driver side? Is there one on driver side?

[@johnp878]

Good job. I will do like you did

[@horizon1793]

What kind of cleaner did you use?

[@draganbuhanovich6411]

If remove this mount ,engine will drop enough to reach belt tensioner bolt ?

[@JulioAvalos3000]

What torque wrench are you using?

[@mikea5205]

I'm tired of these damn things going out. Had to replace mine 3 times and a 4th is needed. They're all bad, no matter who makes it or sells it. Even OEM mounts don't last but a few years. Just a flawed design.

[@oegesauto5619]

Nice job

[@VinodKumar-jt3og]

Good 👍 job

[@isidroo1]

How did you diagnose that the mount was bad?

[@user-bp4qq7tt1u]

Mines obvious because when I press the pedal quickly you can hear a knock or basically anytime weight transfers from the front or back or vice versa.

[@cognac8297]

If your thinking about it change it .that's the diagnosis

[@likeistolesumthin]

Is this similar for the si?

[@TRQ]

+likeistolesumthin Yes, the installation should be very similar.

[@iheartg4be]

why do u remove the bottom mount if ur not going to replace it?

[@yukonstriker1703]

3 17 mm bolts is all it takes. No need to remove the brace