How to Replace Front swaybar endlinks || Honda CRV 07 - 12 HRV CIVIC ACCORD

[@alfanhadi4638]

Thanks, Mr. Dan. My 2013 RM3 needs replacement too. Makes a clunky noise when I turn the steering wheel. It is leaking pretty bad 😁

[@GarasiFelixDan]

You have to get the steering rack service and check other components such as lower ball joint , Stabilizer links & lower arm bushings. keep us updated.

[@alfanhadi4638]

@@GarasiFelixDan thanks for reminding me. Steering rack is still ok. Honda switched to eps. Stabilizer links are shot on both sides. Ball joints are on their way out too. Been a potato couch these couple of months 😁. Need to get my ass underneath the vehicle asap. Have a great day mr. Dan. Cheers

[@alfanhadi4638]

Just finished replacing the stabilizer link a couple hours ago. The upper nut came out smoothly. Not so much with the rear one. That sucker didn't want to come out. Used everything I have in my arsenal of tools, flare nut wrench, breaker bar, big ass impact gun. Nothing worked. Ended up rounding the nut. As a last resort, I sawed off a bit of the nut. Finally it turned loose. Jacked up the rotor abit, then I was able to take out the link. I guess not every repair will go as smooth as butter. Maybe you could give some pointers on how to deal with very stubborn bolt n nut. Thanks again Mr. Dan 😁🙏

[@GarasiFelixDan]

@@alfanhadi4638 if you see stubborn bolts like this just use grinder tools to saw it off and just get another replacement nuts. doesnt have to be a honda nut. 😁

[@alfanhadi4638]

@@GarasiFelixDan thankfully, the links came with new nuts with nylon inserts. I sawed it off manually. Then I used impact socket to screw off what was left off the nuts. Supposed to be a 30 minutes job that finally lasted 1 hour just to wrap up everything 😁😁😆

[@philipsakhong1918]

Thank you sharing the video ! Very helpful

[@GarasiFelixDan]

you r very welcome sir Philip.

[@bryanwhite2886]

Lovely job spot on

[@GarasiFelixDan]

Thank you sir. :)

[@911andrius]

Thank you for this video o do this job today ;)

[@wiismini4wd]

Hi thx for the great video, so you used 2 jacks to lift the car? 1 for the car to remove the wheel, and the other to pressure so you can release the bar? Do you know the torque for the nuts? Thx and cheers for the video

[@GarasiFelixDan]

If you can lift the car with jack and put it on jack stand it would be better. 16 - 18 ft lbs

[@BadBoysClub_MG]

Air bag light is on in dashboard? Where u able to fix it? I got the same issue and unable to read air bag error code using diagnosis tool obd2 and also using pro garage obd2 scanner

[@GarasiFelixDan]

its one of the module sensor , you have to get the sensor replace. check seats sensor , airbag sensor etc.

[@haroldperez24]

For a 2020 Honda hrv with the R18. 1.8 l engine would this work as well?

[@GarasiFelixDan]

yes should be the same. 👍🏼

[@SolitaryMaverick]

No rust. In the US these are rusted & hard to get off.

[@GarasiFelixDan]

Yeah indeed we r lucky enought we dont get rust build up here. :)

[@whiskkers9291]

Is this your house? I do not know how you can relax with all the car horns. Thanks for the video it was helpful.

[@GarasiFelixDan]

Yep. But we get use to it already... i know its too much noise n car horns hehe.

[@whiskkers9291]

@@GarasiFelixDan You are fine, The video was good. I just noticed a lot of Beep Beep so I was thinking how you must never get to sleep. :)

[@DrKniz]

I changed those along with the cradle bushings. Still hearing the knock. What else can it be ?

[@GarasiFelixDan]

top hat mount ??

[@DrKniz]

@@GarasiFelixDan I'm not sure what that is. Please explain. Thanks

[@GarasiFelixDan]

@@DrKniz top hat mounts r located on top of the shock arbsorber.

[@unclemikey9124]

Most likely the strut mounts are bad

[@Charkatak]

Hey, do you think rear shocks can also make this noise?

[@GarasiFelixDan]

Yes it can also make noise if blown.

[@CenterTree777]

7:25 and 9:25. Shouldn't the nuts be TORQUED to a specific spec?

[@bobbyferguson5207]

yes! 58 ft-lb BTW- when torquing bottom 17mm nut vehicle resting on level ground in order to access bottom nut w/torque wrench.

[@untungtunggaljaya6591]

What call this join part sir. Why i just type endlink CRV gen 3 (crv 2007) cannot find correct item. Many thanks

[@untungtunggaljaya6591]

Finally i found it. Is it call link stabilizer Link. Glad can find it correctly. See ya brother.

[@GarasiFelixDan]

@@untungtunggaljaya6591 yes sir correct

[@nindiarahayu1500]

izin nanya om, CRV saya ban kanan depan kalau masuk lubang bunyi gleduk tapi kalau ban kiri yang masuk lubang ga ada masalah, sudah cek link stabil sepertinya ga ada yang koplak, kira2 masalahnya apa yaa?

[@GarasiFelixDan]

Tie rod dalam / tie rod end / bushing tower mount atas. Coba di cek apakah uda haus.

[@nindiarahayu1500]

Sebenernya kurang paham juga siih, tapi udah saya bawa ke bengkel wilayah aceh tamiang belum solved juga, rencana mau bawa ke medan aja nii. Ke bengkel mana bagusnya saya bawa om? Selain bengkel resmi yaa 😁😁

[@GarasiFelixDan]

@@nindiarahayu1500 Coba bengkel asun per di Jalan Cemara No. 24 B.

[@nindiarahayu1500]

Terima kasih banyak om, sukses terus channelnya.

[@noelncube1305]

Mine was wrongly diagnised as worn out arms.

[@GarasiFelixDan]

yeaps it is very common on the arms for these cars.

[@ptyptypty3]

what year is the CAR you have in the VIDEO ??...

[@GarasiFelixDan]

2010 honda crv

[@ptyptypty3]

Thanks Dan :D 2010 you say... mine is a 2008... so, I assume your video will help with my car... Great Video!!. You recorded it Perfectly!! Great Lighting!!... Thank YOU!!

[@GarasiFelixDan]

@@ptyptypty3 it is similar . :) thank you

[@sofianomsof2870]

Om crv saya hampir sama masalahnya, bunyi gleduk dari kanan depan kalau di jalan gelombang atau masuk lobang. Kemarin sudah saya cek link stabil dengan cara mobil digoyang2 sambil pegangi link stabilnya tapi ga ada gejala koplak, kira2 masalahnya apa yaa?

[@GarasiFelixDan]

Bisa jadi steering rack assy nya uda kena atau lower control arm (sayap) bushing uda kena.

[@sofianomsof2870]

Di mana bengkel spesialis steering dan spesialis kaki-kaki wilayah medan yang recommended ya om??

[@GarasiFelixDan]

@@sofianomsof2870 Bengkel Botak Seng Jalan Sutomo Ujung No. 65/19A, simp, Jl. Adinegoro Jl. Arif Lubis, Gaharu, Kec. Medan Kota, Kota Medan, Sumatera Utara 20235

[@whiskkers9291]

Someone playing Pac-Man at 1:06

[@GarasiFelixDan]

🤣

[@dattran6372]

Easy if the nuts just come off, but that's not realistic in many places.

[@GarasiFelixDan]

true that some time easy job becomes a difficult job to do haha.