How to Replace Front Wheel Bearing & Hub 1998-2002 Honda Accord

Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ia/1ASHS00294
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 1998-2002 Honda Accord.
• Check here for more videos on the 1998-2002 Honda Accord: • Honda Accord 6th Gener...
This process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 17mm Socket 1aau.to/oa/1AXAA00015
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Press
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Center Punch 1aau.to/oa/1AXAA00055
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Pick 1aau.to/oa/1AXAA00037
• Vise
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 6th Generation 1998-2002: • Honda Accord 6th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@aaronsuchy8852]

Today we are working on a Honda that we recovered from the bottom of the ocean.

[@nathanielbolden5053]

Bikini bottom

[@donaldcarter4324]

Thank you for the professionell totorial. This definatly looks like an up north car.

[@HuntTompson]

Thank You! Why need to replace the hub? Can i use old hub with new bearing?

[@boatingcharlie1]

Great job and thanks for shouting out the torque specs.

[@montydaniels1054]

@TRQ. My daughter dropped off her 98 Accord. Says it shakes really bad when she's stopping. Since some guy drove into the side and hit the wheel, I assuming since I can see the tire wobble just a tad with the front end jacked off the ground & idling while in drive, that the wheel must be bent.But sitting here thinking about it, the problem could be a caliper brake issue.........

[@kevink6265]

Great video, props for using a rust belt car.

[@lazerrrbeam4290]

I replaced my cv axle and my uppper control arm my tie rod feels nice and firm on my 99 Honda Accord it’s still making a thump sound on bumps and can it possibly be the other side or wheel bearing(my other cv axle sounds bad aswell and has play but it sounds like it’s coming from the side I replaced)

[@jackheris687]

When the wheel bearing starts going bad, does it start to make a certain sound?

[@short.version]

Good video. Absolutely no need to impact drive rotor set screws....they aren't even necessary to have on the vehicle. Commenting to help some poor soul who will have to drill theirs out....I've had to do it twice on these cars from the east coast.

[@thatimposter1937]

At how many miles does it need changing ?

[@nixmix3544]

Thank You! No excellent video! 🙏

[@stevenjames3356]

Love the video but why did you put the rotor retainer screw so tight 😂 you don’t even need them let alone have them on that tight 😂😂❤

[@swedauto1]

Holly rust.

[@josenicolas4896]

How u know the torque on each nut??? U do great job and very helpful videos

[@ChunkyLover53atAOL-com]

You can look at old shop manuals, or google it as long as you are paying attention to the results it gives you...

[@only1nobull]

I always do 278 foot pounds of turk!

[@troublesome1827]

What size is that axel nut?!

[@turbochargers7841]

Why did you say you have to remove and reinstall the original hub race when you yourself, did not do so? I’m guessing it’s not required, thanks for the confusion.

[@josenicolas4896]

How u know the torque on each nut???, u do great job and very helpful videos

[@ryansmith2814]

Service manual

[@squaremileca985]

Every reference I find shows the outer tie rod inserted from top, except this video at 10:10. Also was removed this way…

[@Acetyl53]

The rotor screws are actually JIS. I stripped one trying to use phillips.

[@Acetyl53]

Also thanks.

[@puppetmasterblaster]

Just drill em out with a cobalt drill bit. And never put those idiotic screws back in

[@LouisJr.]

Wow! This car has a lot of rust on the suspension components. We're you up north somewhere when you did this video TRQ?

[@TRQ]

+Louis Jr. Yes we are based out of Massachusetts.

[@Ihavetruth22]

So you need a press to remove the HUB? They arent bolted on?

[@wontshutup1144]

Yep... You will need a press or one of those press kits where you can press the bearing in or out while the knuckle is still attached to the car

[@olbricky6824]

@@wontshutup1144 remove the hub with the bearing and buy the hub with the bearing already pressed in

[@ChunkyLover53atAOL-com]

@@olbricky6824 uhhh...

[@itsjustaguy27]

Good video but man can you show us how we can do this AT HOME

[@ChunkyLover53atAOL-com]

This is how you can do it at home lol

[@Lalohandles_]

Too many required tools that I don’t have. I’ll just have les schwab do it lol

[@nathanielbolden5053]

So much rust!....theres nothing left of that upper control arm it's just rust barnacles!

[@user-bq9qo9wv9v]

👍👍🙏🙏

[@TRQ]

+مالك الياسري. Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@caremotor86]

O man rarer buy a new car

[@TimmithyZERO]

First thing you took the lug nuts off improperly bad sign

[@andrewb1313]

How so?