2011 Honda Accord Wheel Bearing Replacement

An old or worn-out wheel bearing can cause a lot of unnecessary noise and vibration, replacing this can make all the difference in the world when going on your next Sunday drive. Jacob shows us exactly how you need to tackle this task should you even need to on a 2011 Honda Accord.
You can find the tools used in this video below!
14 PC METRIC ONLY TECH SERIES EVA FOAM TRAY- IMPACT SOCKET & ACCESSORIES INCLUDED:
bit.ly/37YMV72
GEAR DRIVE ROE WRENCH SET - 0° OFFSET - METRIC - 12PC
bit.ly/3LGKEw4
12V 3/8" DR MINI IMPACT WRENCH - 2.0AH
bit.ly/3vDKlN1
IMPACT DRIVER BIT SET - 13PC
bit.ly/3fMDmpR
BALL JOINT EXTRACTOR SET - 5PC
bit.ly/3w2S2uW
#sptoolsusa #HONDA #CEASGarage #Wheelbearing
The Cutting-Edge Team has over 100 years of combined experience in offering the highest level of customer service and product support.

[@marcpilkington4438]

Great video and thank you! Firestone complete auto care just quoted me over 1k for this job bc they wanted to replace the entire knuckle instead of replacing the bearing! I'll be taking my money to a more skilled shop like yours!

[@Trioptic3D]

Jeez that's a lot of work.

[@marccrotty8447]

Good clear explanation and video. Thanks.

[@conradmaxwell7739]

Good job on the video guys.

[@xyoojj]

I like how your eye sparkles.

[@dirtwasp09]

how about the link to the otc tool... thx

[@reggienhappiness8851]

Is the same for 10th generation

[@rumpelstiltskin2454]

It’s amazing how easy things work out when you don’t work on vehicles that are bathed in salt year after year and turn to flaky rust buckets!!

[@CEASUSA]

Totally!

[@diyhalloweenprops]

When installing bearing, no need to use a cup

[@johnengly273]

I like your video. It is clear and easy to follow. Thanks

[@huyquoctran2088]

What brand wheel bearing did you used?

[@devonoldreive237]

Don’t use a “ pickle fork “on a tie rod or ball joint you want to use again.

[@tntrich1]

Yea, Ive ripped quit a few boots using a pickle fork, I now use pullers to take out tie rods and ball joints

[@a.m.c..5952]

😂 At min. 21:00 of the video, You supposed to call lunch time, 🤗 Cause at min.22:00, 👋...🫠 Your hands were shaking like if were playing with maracas 👾.

[@terrydavis2012]

You don't show how press the hub in

[@huyquoctran2088]

My honda accord 2010 “oem” wheel bearing failed at 60k miles. Why so early? Its a “national “brand made in usa but failed at 60k miles. I also notice famous brands like nsk, skf and timken are made in china now.

[@rgreen95838]

I have a 2018 accord with 50k miles and mine went out. The dealership wanted 530 to replace it with 225 for parts. Total rip off. I told them I'm not buying any parts from you if they only last 50k. I'll get two from the parts store for 120 and do them my self

[@manuelsalgado8510]

Is an alignment needed after doing this job?

[@CEASUSA]

It's not required but is recommended.

[@joselozada5093]

How much do car shop charge for a work done like that?

[@CEASUSA]

It really all depends on the shop!

[@rgreen95838]

The dealership Wendy's 530 to do one side on mine

[@rgreen95838]

What year is that honda.

[@CEASUSA]

2011

[@Charles-rx6zz]

How much did you charge for that work specifically!

[@CEASUSA]

Generally between $400-$600 depending on which shop you go to. This job however was at no charge since it was one of our employee vehicles.

[@digitalmixer]

Why did my abs light come on when I change mine

[@CEASUSA]

Pretty common thing to happen when messing with or removing tires. It's very likely that you unplugged or moved the ABS Sensor.

[@kevincasey2708]

@@CEASUSA The light will also come on if the bearing is accidentally installed with the magnetic side facing out. Not saying that you did that, but I've seen it before.

[@ontherun2127]

Dj cece

[@MrSupernova111]

Nice video! 13:20 about how strong of an impact gun would you say you need to pull out the hub?

[@CEASUSA]

Thanks, Supernova, We would suggest at least a full-size gun 1/2" or bigger.

[@MrSupernova111]

@@CEASUSA . So, I tried to use my Milwaukee mid torque to remove the wheel bearing also using a grappler. It never moved. I prefer to do my own car repairs but in my current living situation is not feasible to be banging away or hammering endlessly with an impact gun. I guess I'll need to let the shop do this one. I can't wait to get my own house with a garage (and a more powerful impact gun). Thanks for the great video and the kind reply!

[@CEASUSA]

@@MrSupernova111 Thank you for the kind words! When you're ready we'll be here to help in any way we can ;-)

[@MrSupernova111]

Cutting Edge Automotive Solutions . You got a new sub. Love the content and well edited videos. Cheers!!

[@Joy-dm5fr]

You made a mistake bud!!! You said the magnetic side towards the sensor and you have the knuckle fliped so you put it wrong

[@diyhalloweenprops]

Ear protection

[@CEASUSA]

Always!

[@Skate767]

How To Replace Honda Accord 9th Gen (2013 - 2017) (Passenger Side) Wheel Bearing Hub Assembly Click Below ⬇️ kzbin.info/www/bejne/a5mzl4mLe5hge5o

[@CEASUSA]

Good job!

[@14andtro]

Amateur