How to Replace Front Wheel Bearings 1994-2004 Chevy S10

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ib/1ASHF00496
This video shows you how to install a new wheel bearing on your 1994-2004 Chevy S10. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar 1aau.to/oFI/1AXAA00020
• 19mm Socket 1aau.to/oWK/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oam/1AXAA00288
• Brake Caliper Hanger 1aau.to/ofv/1AXAA00084
• Adjustable Wrench
• Channel-Lock Pliers 1aau.to/ohJ/1AXAA00139
• Straight Cutters
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa8W/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oafr/1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Block of Wood
• Brake Fluid
• Brake Parts Cleaner
• Paper Towels 1aau.to/ouZ/1AXSS00035
• Sandpaper
• 10mm Allen Wrench 1aau.to/obZ/1AXAA00007
• 10mm Hex Socket
• Brass Punch
• Drain Pan 1aau.to/orZ/1AXAA00320
• Floor Jack 1aau.to/oL8/1AXAA00068
• Hammer 1aau.to/oII/1AXAA00091
• Jack Stands 1aau.to/oJs/1AXAA00065
• Wire Brush 1aau.to/ooB/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@BanditXL]

Thank you for your correct video on how to do front wheel bearings..

[@Higgs000Boson]

Same exact procedure on my 1994 Chevy Silverado C1500, thanks for the video!

[@carportmods]

Thanks for making this video! I have a '94 rwd C1500 Cheyenne and I know it's the same process.

[@josepaz8227]

Great video

[@dr.kennethnoisewater26]

Appreciate the video

[@jefferycantwell7455]

Thanks. First time trying this. Success thanks again 😅

[@arielcastro34]

What's the specs of Torquing the Nut ??

[@photondebuger45]

Oh yeah an ole mate that has a sonoma (kinda the same to this the s-10) has that same caliper and the pins were rusty just surface rust tho but i had a bit that fit to in it and spun it like mad in scotch brite pads made it real shiny again i don't have a wire wheel on a bench to do that so i did it that way, worked tho

[@isaacpayl524]

I wish they would use tools the common person would have at home

[@aliciaANDanthonySandoval]

How about 4wd version?

[@pierrececile9611]

what side of the seal is facing downward?

[@annoying_films]

Will this also work on the 4wd s10?

[@indioschimney7001]

Cool 93 sonoma

[@dberry1052]

note he's using a brass punch..to keep from marring the rotor

[@TheDriver21122001]

Is a 2005 Blazer 2WD the same....never any videos.

[@zadenholte7122]

I can not for the life of me get the races out

[@photondebuger45]

Kinda quacky they painted that part purple..... Not them the possible owners if the truck yeah

[@nicholas4860]

I went out and bought 10 mmnallen and it wasn't it. It's a fucking star

[@deependz3231]

Maybe, just maybe, you should add 2-wheel drive in the title?