How to replace front wheel bearings and seals on a dirt bike - performed on my KTM 250SX 2 Stroke

  Рет қаралды 9,060

MrDen119

MrDen119

Күн бұрын

In this video I'm replacing the front wheel bearings and seals of my KTM 250 SX!
My front wheel had side to side play. I came to the conclusion that the bearings of my front wheel need to be replaced. So that’s what we are going to do in this video. I will take you through all the steps necessary to be able to do this and i will give you information about things you need to keep in mind while doing this.
Enjoy the video and let me know any thoughts in the comments, via Instagram or TikTok. Feedback is very welcome!
🍩 DemDonuts Grip Donuts🍩
Website: demdonuts.com/
3+1 Package Deal: demdonuts.com/...
Merchandise: demdonuts.com/...
🍩 DemDonuts Social Media💻
Instagram: / demdonutsofficial
Facebook: / demdonutsofficial
TikTok: vm.tiktok.com/...
🏍💨 MrDen119 Social Media 💻
Instagram: / mrden119
TikTok: vm.tiktok.com/...

Пікірлер: 16
@davidtucker5775
@davidtucker5775 2 жыл бұрын
If you are not pressed for time, put the bearings in the freezer or on ice (inside their plastic pouches of course) over night. Use a small propane/MAPP torch to heat the hub to about 58 - 60*C (or hot enough to only be able to hold your hand on it for about a second or two) just before you want to install the bearings. Then use the same process you’ve shown in the video. You’ll have about a five minute window before the surfaces start returning to their original clearances. That time will be cut down to about two minutes once you start pressing the bearing in, but it will be noticeable in the ease at which you can press them in. Good video. Thank you for posting.
@MrDen119
@MrDen119 2 жыл бұрын
Thanks for adding this advice! Thank you for your comment happy to hear you liked the video!
@andreasjonsson8075
@andreasjonsson8075 Жыл бұрын
Nice decals. Were did you buy them?
@MrDen119
@MrDen119 Жыл бұрын
Thanks! It was a collaboration with TEC Design a Dutch company, I showed them what I wanted and they designed it.
@jaimepalacios788
@jaimepalacios788 3 жыл бұрын
Nice job! Thanks.
@MrDen119
@MrDen119 3 жыл бұрын
Thanks! Glad it was helpful.
@tonvanmiddelkoop6103
@tonvanmiddelkoop6103 3 жыл бұрын
Thanks for sharing this video especially the moment when you noticed the spacers were installed the other way around. This helps us viewers to pay attention to such details. One tip I have for the rear wheel spacers: put an O-ring over them. It creates an extra barrier for water and dirt, works very on my bike and resists to pressure washing as well. Oh, Say hi to Rick whenever you go to Andre motors btw ;)
@MrDen119
@MrDen119 3 жыл бұрын
Thanks! Glad it helps! Placing a o-ring sounds good indeed, maybe i will try it out. What kind do you have and where did you get them? Haha i will do that! ;)
@tonvanmiddelkoop6103
@tonvanmiddelkoop6103 3 жыл бұрын
@@MrDen119 I just put general O-rings from a set that I keep for general use. I think I ordered that set from Alibaba 🤔 The size is just slightly smaller than the wheel spacer so it has a nice snug fit (don’t know the diameter of the spacer)
@MrDen119
@MrDen119 3 жыл бұрын
Good to know, thanks! I will look into it sometime.
@rebentamotas8397
@rebentamotas8397 Жыл бұрын
hey, hubs brand?
@MrDen119
@MrDen119 Жыл бұрын
The complete Wheelset is from Prostuf. They have wheels for all kind of bike brands and types
@chillozz1
@chillozz1 11 ай бұрын
om eventuele schade aan de wiel pasbussen te voorkomen kan je de volgende keer beter een dopje met een verlengstuk eraan gebruiken. Schroevendraaier tik je er al snel putjes in... [al vallen de kosten van die bussen ansich wel mee] Maar beter voorkomen dan genezen toch.. zal eens wat op je kanaal kijken kwam je per toeval tegen..
@MrDen119
@MrDen119 11 ай бұрын
Het is inderdaad een beetje opletten met wat je doet. Maar een dopje voorkomt dat, goede toevoeging ;)
@luukwitteman228
@luukwitteman228 3 жыл бұрын
🔥🔥
@MrDen119
@MrDen119 3 жыл бұрын
🔥
Dirt bike- How to straighten front wheel alignment after crash
4:04
Tokyo Offroad
Рет қаралды 360 М.
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Motorcycle Steering Head Bearing Replacement
22:56
Tokyo Offroad
Рет қаралды 27 М.
KTM Dirt Bike Front Wheel Installation
4:21
Tokyo Offroad
Рет қаралды 276 М.
Replacing Dirt Bike Wheel Bearings Using Basic Tools
16:28
MVDBR Enduro
Рет қаралды 26 М.
Steering Stem Bearing Replacement on KTM, Husqvarna & GasGas Motorcycles
18:21
Rocky Mountain ATV MC
Рет қаралды 93 М.
What if HONDA never stopped making 2-Strokes...
15:24
Dirt N Iron
Рет қаралды 562
How to change wheel bearings on a dirt bike
7:21
Steps to Podium
Рет қаралды 47 М.
How to Corner Faster on a Dirt Bike - 15 Tips
15:26
Ride With The Knights
Рет қаралды 917 М.
Solo Race Sag Method
5:47
SSRacing66
Рет қаралды 9 М.
Top 10 Dirt Bike Suspension Tips Do's & Don'ts
13:55
The Mx Factory
Рет қаралды 490 М.
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН