How to Replace Front Wheel Hub & Bearing 02-14 Volvo XC90

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning wheel bearing hub. This video is applicable to the 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, Volvo XC90.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaaj/1A...
• Pry Bar 1aau.to/ogy/1AX...
• 15mm Wrench 1aau.to/onM/1AX...
• 18mm Wrench
• 10mm Socket 1aau.to/oQE/1AX...
• 14mm Socket 1aau.to/oW2/1AX...
• 18mm Socket 1aau.to/opJ/1AX...
• 19mm Socket 1aau.to/opJ/1AX...
• 21mm Socket 1aau.to/opJ/1AX...
• Angled Die Grinder 1aau.to/ob/1AXA...
• Blowtorch
• Brake Caliper Hanger 1aau.to/oH/1AXA...
• Torque Angle Gauge
• Pliers
• 1/2 Inch Breaker Bar 1aau.to/ojs/1AX...
• Ratchet 1aau.to/oabR/1A...
• Socket Extensions 1aau.to/oW2/1AX...
• Torque Wrench 1aau.to/otm/1AX...
• Brake Parts Cleaner
• Copper Anti-Seize
• Rust Penetrant
• 7mm Hex Socket
• Floor Jack 1aau.to/orA/1AX...
• Jack Stands 1aau.to/orM/1AX...
• Large Hammer 1aau.to/ojK/1AX...
• Rubber Mallet 1aau.to/oan/1AX...
• Wire Brush 1aau.to/od2/1AX...
For More Info visit us at 1aau.to/h/bPc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@keithogden789]

I love ALL your XC90 vids ! has helped out my 195K Beast . Keep them coming

[@cruzcontrol121]

Thanks for the videos guys. Less blunt force to the hub at a different angle/a hub puller would've been suffice. I like that you guys didn't do a cut scene when having complications with the outer tie rod as well. I despise vids where people make every job they do seem so easy but don't show the fighting of certain parts they had to go through to get them loosened. Keep up the good work.

[@joedirt5873]

Hammering from the top of the Hub seemed like a bad idea to me. With this approach either the hub has to bend or the kuckle has to bend. My XC has over 160K miles and lived in a cold climate all of its life so it was rusted in really badly. What I did instead was to reinstall the 4 bolts leaving them 1/4 inch out. I then hammered each of them from the back in a cross pattern until the hub popped out. Easy to do using a regular hammer and since the bolts are supposed to be replaced anyway, it presented much less risk of damage to the knuckle. HTH

[@1AAuto]

+Joe Dirt Thanks for the feedback!

[@andrewnevermind4902]

Thanks for the tip. 2 years later. Going at this over weekend. 🇨🇮✌️

[@Empyreaaron1]

one of the best auto "how to" videos ive ever seen

[@scottwaldie4979]

My front strut decided to rotate when I removed the hub support assembly! The wheel bearing bolts I'm having a lot of trouble loosening, even with a gun running at 450 nM. Great video by the way.

[@1AAuto]

+Scott Waldie Thanks for checking us out, Good luck with getting those bolts loose! 1AAuto.com

[@yahoshua2527]

Well I followed this to a T and the two bolts you need to loosen seized up on me, can't get a closed ended wrench between the boot and the wrench and an open ended wrench strips the bolts, basically the boot is too big around to get the wrench behind the bolt, glad I watched a video that made me think i could do this, bout to have to call the local scrap yard and give my car away for almost nothing

[@blvdblvd8307]

@8:55 THIS IS THE STEP YOU MISSED IF YOU WOULD'VE USE THE AXLE BOLT AND A LONE SOCKET AND A HAMMER YOU COULDVE BACKED THE BOLT OUT 1/4 AND HIT THE SOCKET WITH THE HEMMER AND BROKE THE AXLE FRE IMO

[@1000hpwnd]

Wrong torq spec for the caliper carrier to hub. According to my source it’s 105nm(77fp)+60 degrees, even tho it looks tight enough 🤷🏻‍♂️ 35nm(26fp)+60 degrees is for rear

[@RandomYoutuber1023]

Great video. One small correction, Stop Signs are Octagons or 8 sided. Allen head is 6 sided...

[@1AAuto]

+RadarUser Thanks for the tip! We'll pass this info along to our production team.

[@xyphur]

There's really no need to wallop on the top of the hub flange to get the hub & bearing assembly out. It's wasted effort. Consider the angle of attack of the hammer. That force is being transferred directly to the opposite side of the hub into the knuckle. It would be more efficient (and less likely to cause damage to the knuckle bore) to hit it from the backside of the flange, that way nearly 100% of the force is going into driving the hub out of the knuckle, instead of sideways into the knuckle (and also transferring force into the ball joint, and exerting excess force in the strut which is at its limit of extension in this case. As Joe Dirt mentioned, a better approach would be using the single-use flange-head bolts on the back as hammer points to drive the hub assembly straight out the front of the knuckle a bit at a time at each corner. Alternatively, a slide hammer mounted in the axle hole of the bearing would likely pull the assembly out pretty easily. Worth noting: Don't reuse any fasteners that have the factory red thread lock compound on them. They are usually torque-to-yield fasteners (angle torque), which means they stretch by design. Once they are torqued once, they cannot be removed and torqued the same again without compromising their integrity. Refer to the Volvo VIDA repair procedure for basically anything that involves such fasteners. They warn you every time to use new fasteners unless otherwise specified. This is a safety issue and should be heeded. Especially for something as critically important as a wheel bearing. This goes for the bearing assembly flange bolts (4), as well as the M10x40 (or M10x65 in this case) axle bolt. All are single-use.

[@1AAuto]

+xyphur Thanks for the feedback!

[@SHINdanny]

14:00 & 14:29 look at those marks on the old wheel hub/bearing, that´s one of the reasons I do the repairs myself

[@joshrockwell1470]

Anyone know of a video for a 2016 XC90?

[@rccorcoles7082]

Would it be the same for 2011 s40 t5?? Thanks

[@andrewnevermind4902]

I don't think anyone attempting the wheel bearings will need lessons on removing a wheel. Good vid though.

[@DaleFrazellNewConstruction]

Don't you need to have front end realigned after taken everything apart? Smacking the hub with a lumpy might not be the only thing that gets hit (i.e. fender, abs line, etc) Great video overall..

[@d-s-ll2378]

hammering out is excellent, though people have other way loose it out.

[@randolphbehm877]

FYI, I didn’t need to separate the tie rod to get the CV shaft out of the bearing on my 08 Volvo…

[@turbovan65]

11:50 ...as it hangs from the sensor wire...

[@xmichaelcainex]

When I undid the axle bolt oil poured out.. Could you tell me why?

[@1AAuto]

+Michael Caine This isn't uncommon and just needs to be refilled after. Thanks for watching.

[@7gooo]

Sooo .. I will take these knuckle Bolts off to thank you for your precious efforts in this video and get them back again in their place ... shame on you Volvo LOOL 😃

[@1AAuto]

+7Gooo Thanks for checking us out. 1aauto.com

[@user-kt2kv8rr8e]

So how many ft lbs lol