How to Replace Front Window Regulator 2007-Present Toyota Tundra

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@morgandrives]

My driver’s window regulator needs to be replaced and I thought “I could do it myself if there is a good how-to video out there.” Found yours right away. Thank you for posting this! Very clear and great attention to detail. Will save me a 2 hour labour charge. 👍

[@notOEAH]

I love how easily repairable the Tundra is

[@dlf1976]

Very helpful! I gotta tackle seeing why there was a loud pop while rolling my window down, then the window leaned back a bit. Rolled up with help from a hand. Gotta start digging into it tomorrow

[@sircob3]

Did you figure it out

[@x19xsmgx89x]

What did you find out? Mine did the same thing, buddy told me I probably needed a new regulator.

[@BradSteinbeck]

Did you get this fixed? That describes exactly what happened to mine! Thannks.

[@Jarren47]

Mine also does the same. Can't figure out why.

[@brettoberry3586]

Excellent instructional video. Thank you!

[@tyanhdo]

Very helpful. Thanks for sharing this.

[@jacobthompson7611]

Great video, made it very simple and informative. I'm assuming this should be very similar, if not the same, for a 10' Sequoia?

[@ajcaiati]

EXCELLENT VIDEO and explanation. Thank you.

[@derekdriver251]

I had the clip that is glued to the window and bolts to the regulator break. Where can I buy just the clip and what adhesive should I use to glue the new one on? Thanks

[@jex8046]

Ty for the tutorial

[@swetblu]

This shoud be about the same process for a Tacoma?

[@lesp315]

Did your window completely stop working or was just getting slow? If just getting slow why not just lub it?

[@moklock]

Nice that the Taco still has a scissor type window mechanism. I thought all the auto mfr’s used the janky cable ones these days. Props to Toyota

[@NikoRad987]

Thanks 👌👌👌

[@elong35]

Does the entire regulator need to be replaced or just the motor?

[@stacydeason2544]

Great info thanks

[@luisarturogarciaarmijo9117]

excelente

[@beerlinemodeler]

How similar is this to the driver side rear door on a double cab?

[@TRQ]

+BeerLineModeler This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

[@JasonSmith-qs9vo]

Hey guys and ladies, got the the larr for 09 Tundra but the window is stuck up.... How do I get the window down to work on?

[@zakilorado25]

What is the name of your power wrench?

[@MidnightMiata]

Might want to do better QC on these. Mine was pinned backwards

[@ryangerrietts8513]

I bought a regulator without a motor like a dingus. Is it possible for me to take the motor off of my old regulator and put it on the new regulator?

[@TRQ]

+Ryan Gerrietts Some aftermarket window regulators are designed to only work with factory-style motors. We would recommend checking with the vendor you purchased through to ensure that you can use your original window motor on the new regulator.

[@edmccollum2840]

I cannot get the window all the way down so I cannot access the one nut on the driver side closest to the tire on my tacoma. What can I do?

[@edmccollum2840]

Window only goes down about halfway

[@edmccollum2840]

Window only goes down about halfway

[@kaleyeahitsaustin6026]

Just bought a 2020 and the driver door window seems a little slow/vibration as the window gets almost the whole way down. Hopefully it last a while cuz I don't feel like doing all this work. It only has 35,000miles on it, so a little disappointed in Toyota.