How to Replace Fuel Pressure Regulator 2000 to mid-year 2003 Avalanche Suburban Silverado Yukon

[@JohnCRV]

Today we Replace Fuel Pressure Regulator 2000 to mid-year 2003 5.3 LS Avalanche Suburban Silverado Yukon The Regulator is located on the driver side by the fuel rail. They were later put inside the fuel tank from mid-year 2003 (I believe)

[@savinogiovanni]

Very useful video on how replace the full pressure regulator! 🙂

[@JohnCRV]

Glad it was helpful! Big Thank you👍

[@MrLowePlus]

Hi John great video and thank you very much for being a long term supporter of our channels 😃👍 Sincerely, Mr Lowe 😊Denmark

[@JohnCRV]

Always Mr Lowe. Thanks for the visit👍Florida

[@photocontrol]

Great how to John and son on replacing the fuel pressure regulator. Have a great week! 👍

[@JohnCRV]

Thanks, you too!

[@davestredulinsky]

Interesting to see how you tested and replaced the fuel pressure regulator. I enjoyed following your tutorial in full to the end. Thank you, my friend.

[@JohnCRV]

Thank you!

[@Reviewing_Playing_and_More_RPM]

You do a great job showing everything with such detail, better than others for sure. Great job.

[@JohnCRV]

I appreciate that Dennis! 👍

[@MyTravelChannel-RO]

An excellent job on this tutorial! The demonstration was clear and helpful, making it easy to follow and understand. Thanks for sharing!👍

[@JohnCRV]

You're very welcome!

[@ActNaturally]

Excellent demonstration on the fuel regulator.

[@JohnCRV]

Thanks Marc

[@LeeCheungsChannel]

I just thought about you the last day, i was trying to connect a new connection for a dash cam from the fuse box, of course didn't work, you should make a video to show everyone😊

[@JohnCRV]

Since they started putting computers in cars, its been an issue adding wires for accessories to vehicles... Without going into all the issues the main one is, if something goes wrong with the accessory it will sometimes effect other electronics in your vehicle... There's many more issues depending on the vehicle... especially the very expensive computer (ECU). My Son is having some issues with his 1992 Z28 Camaro we are restoring. We recently got the engine running after it being parked in his garage Since 2011 and now tracing all the added wiring done from the previous owner.... The main wiring issues are the Aftermarket radio system and the alarm system.... Still sorting it all out.... So, my suggestion to you is use the accessory plug (cigarette Lighter) to feed your dashcam or USB plug if your car has one to feed power to your dash cam of course first call the manufacturer for their opinion... This is just my opinion, you may want to get a technician to give you some advice since they do this everyday... I don't mean to discourage you but I've heard so many DIYers having issues after they do these kind of connections without doing research on their particular vehicle's electrical system... Let me know what you end up doing and how it works out. Good luck!

[@ТатьянаКукушкина-т1й]

Спасибо большое за интересное и полезное видео! Посмотрела с большим удовольствием!

[@JohnCRV]

Thank you very much!

[@JOEZEP54]

Hi John, been awhile ☹ Excellent demonstration 👍 Stay well, Joe Z

[@JohnCRV]

Always good to hear from you Joe. Been a little busy myself friend... Thanks and you stay well too!

[@JOEZEP54]

@@JohnCRV 👌

[@VideoProduction-IT]

Video very informative my friend! 👍Have a nice day

[@JohnCRV]

Thank you! You too!

[@EnzoRapacciuolo]

Hi, great job!

[@JohnCRV]

Thank you

[@HealthyVeganLiving]

Good to learn from you John 👍Gary

[@JohnCRV]

Many thanks Gary!

[@BonGalabansafe]

This is very good tutorial. Awesome job.

[@JohnCRV]

Thank you Bon!

Great work for fuel pressure regulator.

[@JohnCRV]

Thank you!

[@AllenOxendine]

Thanks for sharing. Returning Support with Full View and Like. Knowing so much can save you a ton.. Hope you guys have a good week.

[@JohnCRV]

Thanks Allen. You too.

[@VivianCastillo]

Fantastic tutorial.

[@JohnCRV]

Many thanks!

[@justtoofunny]

Great info John!

[@JohnCRV]

Thanks Bob!

[@livingyes]

Thanks John

[@JohnCRV]

Thanks for the visit Bob.

[@TheGravygun]

I was having a long starts so I replaced the regulator and it's still doing it any ideas? Would be gracially appreciated

[@graphician.01]

awesome. good idea.

[@JohnCRV]

Thank you! Cheers!

[@CrissaCabantog]

very informative. i learned a lot. thank you so much. 24

[@JohnCRV]

Thanks for visiting

[@LuckSpinner]

Awesome stuff! 👍

[@JohnCRV]

Thanks for the visit

[@billyb5057]

nice work there John *🦘Au🦘💯full view always📺thumbs up👍😎*

[@JohnCRV]

Many thanks for the visit Billy!!

[@giuseppegulino]

MIO CARO AMICO CARISSIMO JOHN UN MIO CARO SALUTO DALLA SICILIA MOLTO CONTENTO DI RITROVARTI e per assistere ai tuoi interessante e utili video complimenti e grazie per questo video importante sapere e vedere un lavoro non facile se non ha un po di esperienza im meccanica ma tu ci spieghi molto bene e ci fai vedere molto bene il lavoro un caro saluto con affetto e amicizia tuo amico giuseppe 🍫🍫🍫🍫🌵🏵🏵🏵🏵🏵🌻🌻🌻🏵🏵🏵🏵🏵🌵🍫🍫🍫🍫

[@JohnCRV]

Grazie per il bel commento Giuseppe. Spero che vada tutto bene, amico mio.