How to Replace Fuel Pump 1997-2003 Ford F-150

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@maimia3597]

Thank you brother for your help in this video God bless you thank you very much

[@hoangduocsu75]

I was going to replace my fuel pump (entire assembly). After watching your video, I decided to replace just the pump. Probably this is one of the best video about replacing fuel pump. thanks for sharing

[@aydenmadeline3774]

If you have to replace your pump and you have a crew cab, you MUST drop your tank. Do not try to take your bed off, you will not have access

[@hehebbfhehsjbbfo6783]

why does it look like an old tank in the beginning and a brand new towards the end

[@jtgarza8591]

Thank you very much for this video! I was able to use this video as a guide to pull the fuel pump out and replace. I also used your fuel filter replacement video during my trouble shooting process of elimination. I greatly appreciate guys like you posting videos like this to help us degenerates fix things ourselves. Thanks again big guy! 👍🏼👍🏼👍🏼

[@TRQ]

+JT Garza Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@garbagemann9167]

Great video as usual but I’m really surprised you didn’t mention how you cleaned the inside of the tank or released the pressure from the fuel lines ?

[@sneekydee5446]

What a difference having the right tools makes. My pops is a dinosaur and had me doing these things old style😅 which I can appreciate but boy what a pain.

[@travisbrite1916]

Do this outside! Borrow a floor jack. Support tank with it. Remove tank straps. Drop tank slightly( an inch or two). Disconnect refill hose and vent hose. Siphon tank to less than 5 gallons or empty if able through fuel tank refill at the tank connection point. Then drop a bit more. Disconnect all hoses and electrical at tank, including fuel pump electrical. Then Drop tank to ground. Remove fuel pump assembly. Slide tank out if needed just forward of rear wheel.There is clearance there. Change all parts. Finally, reposition completely empty tank underneath. Reverse process for re-install. I did it. My truck isn't lifted. Take your time! Take a day or two. Don't smoke! Use hand tools only. It took longer for back ordered strainer(10 days).

[@waynearribas930]

Where did you get that tank support. And what is it called. ? F150 fuel tank support rack ?

[@Chaoswarriorx7]

Talking about the breather vent tubes. Let's say those weren't slid on all the way. What exactly would happen

[@arpc0027]

That's a nice job but why not replace the sending unit as well since all the parts are the same age? Easier for you and a benefit for the customer because then all of the fuel system parts are brand new and they won't have any more future problems.

[@DavidLuster-fb3ld]

Great video brother.

[@jamesblackwell5141]

excellent video. good quality!

[@ElishaBittock]

Seems like if you have a lifted truck dropping the tank is cake

[@righteous1229]

Thanks very helpful!!!!

[@TonyMontana-tm7ul]

Nicely done video

[@imageguyimageguy1316]

That was a fuel tank replacement on top of the pump.

[@inkmonster0u812]

Good vid.

[@jedmeltonmusic698]

Do not use an impact on those first bolts he took out, you’ve been warned. Clips break.

[@russellgilbert3453]

Yeah, BOOM! 😂

[@Snceday1]

Vent hose was garbage. I would of replaced it

[@FranksShitBoxCollection]

Wouldn't it have been so much easier to unbolt the bed and slid it back a bit? Or am I missing something?