How To Replace Harmonic Balancer 1998-2002 Honda Accord

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/82/m/harmonic-balancer
For many vehicles, the harmonic balancer not only helps balance the engine, but also drives the accessory belt. If your engine is vibrating, or belts are slipping, you might need a new harmonic balancer. This video shows you how to install a new harmonic balancer on your 1998-2002 Honda Accord.
• Check here for more videos on the 1998-2002 Honda Accord: • Honda Accord 6th Gener...
This process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oQd/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oQd/1AXAA00013
• 10mm Wrench 1aau.to/ono/1AXAA00010
• 14mm Wrench 1aau.to/ono/1AXAA00010
• 10mm Socket 1aau.to/oI5/1AXAA00017
• 12mm Socket 1aau.to/oPG/1AXAA00015
• 19mm Socket 1aau.to/otg/1AXAA00043
• Honda Crank Holding Tool
• Trim Tool Set 1aau.to/opT/1AXXX00006
• 3/8 Inch Impact Gun
• Socket Driver
• Torque Wrench 1aau.to/ozN/1AXAA00044
• Rust Penetrant
• Floor Jack 1aau.to/ooV/1AXAA00068
• Jack Stands 1aau.to/onz/1AXAA00065
• Ratchet Strap
• Rubber Mallet 1aau.to/obx/1AXAA00413
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 6th Generation 1998-2002: • Honda Accord 6th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@TMCARNEY1]

I'm a carpenter by trade. Your video has me feeling like a master mechanic. I just finished the Harmonic balancer by follow your instruction and everything went perfect. Thank You

[@myraplist2011]

This is so helpdful. I blew a gasket and not im putting it all back together. Its not TDC but everything was marked

[@rocalamole]

I removed woodruff key and now it is hard to place it back in. Some recommendations please

[@connormckinney2107]

Mine won’t come off by hand, I don’t know what to do

[@dennisrobinson8008]

Use a puller for the harmonic balancer.

[@NINJA4RL]

Im a bit confused on the point of aligning the timing marks as the timing belt is not touched here

[@kaw1240]

Yeah I thought the same thing no need to even check the timing marks you dont even mess with the timing belt

[@josuegalvez1]

European cars do

[@Dumdumcake]

The car you're doing this with is newer than 2002. I only know this seeing as the pulleysare on the drivers side on my 2001 accord. This is a waste unless your accord is made after 2002

[@LCKxReCKLeSS]

V6 models

[@Ms42069666]

Same 😒

[@doogeerugged89]

Trying to be a picture perfect tech is ONLY an image goodyear and firestone advertise, on TV. you don't have to TDC the motor to replace a crank pulley. ONLY reason i'm hear is because i thought i needed a special puller. I got a JDM and i literally have to swap everything over ... sadly ..

[@patriotprepper9175]

Is the harmonic balancer reverse thread

[@fromundadeez4823]

Old comment but no it’s not reverse, just ridiculously tight. I just fought for days before getting one off.