How To Replace Heater & A/C Control 2003-2011 Mercury Grand Marquis

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/134/V/ac-and-heater-...
This video shows you how to install a new Heater and A/C Control of your 2003-2011 Mercury Grand Marquis.
This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• 7mm Socket 1aau.to/oaSE/1AXAA00017
• Trim Tool Set 1aau.to/oY3/1AXXX00006
• 3/8 Inch Socket 1aau.to/obmi/1AXAA00016
• Socket Driver
Subscribe: / @trq
Check out our playlist:
Mercury Grand Marquis 5th Generation 2003-2011: • Mercury Grand Marquis ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@IranMaisonetSr]

My wire length was shorter than the vacuum lines, so I started with them first. All done. Thanks for the video.

[@pilgrimpassingthrough2228]

Very helpful.....Thank you!

[@retiredjc]

A very good video with detailed instructions and explanations. Really recommend.

[@jaythompson6810]

What a great video! I'm thinking mine needs replacing. As I get no heat through my vents but only the dash to defrost the windshield. I ran the self test, and it doesn't give codes. Also, the vent and floor buttons don't light up either.

[@freemoney3723]

My 2000 model looks the same, are they different from the model your showing and the part says discontinuted.

[@charlesmack3885]

Thanks!!!

[@LucianoJuly]

Thank you

[@prostreetmercury]

Damn 4 months later this part isn't available.

[@DisneyUpBoilerUp]

I have a 2011. Mechanic just told me it would take 7 hours to do this. WTH.