How To Replace Ride Level Sensor 2003-2011 Mercury Grand Marquis

Buy Now!
New Ride Leveling Height Sensor from 1AAuto.com 1aau.to/ia/1ASLS00004
This video shows you how to install a ride level sensor on your 2003-2011 Mercury Grand Marquis.
This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa8d/1AXAA00013
• 13mm Socket 1aau.to/obaK/1AXAA00015
• Torque Wrench 1aau.to/oarf/1AXAA00044
• Gloves 1aau.to/oGt/1AXSS00048
• Safety Glasses 1aau.to/oz9/1AXAA00343
• Floor Jack 1aau.to/oTy/1AXAA00068
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Pisti846]

Exactly where it located?

[@maxie9506]

Sooooo the angle is bad. I cant tell when the sensor is attached to nor can I see where the actual sensor clicks in at the end. Is there a link you can provide?

[@classicalextremism]

To replace part simply go to part and replace part. Ok, fine where is it? What is it attached to? What else should you check, look for, or adjust to make sure it is leveled correctly?

[@lucasdunn1776]

HOW DO YOU KNOW if the sensor is bad ?