I'm gonna be doing this this weekend as well as cleaning the throttle body. Bro, seeing that metal piece come off by undoing a couple of bolts is gonna make a world of difference
@jons8081 Жыл бұрын
part # for the gasket?
@basitg Жыл бұрын
Hands down the best video on this repair. Thank you for sharing your knowledge
@anarasii Жыл бұрын
🙏🙏
@Steve517913 жыл бұрын
Great video! the best for this fix in my opinion. Any advice for cleaning the solenoid itself before putting the new gasket on?
@BulliKid Жыл бұрын
How does this effect transmission shifting properly?
@specialstone91537 ай бұрын
Show no check engine light but vtec gasket needs replacing. How long would it take and cost for labor?
@Conald_isAfalseProphet9 ай бұрын
When changing this, should we clean this with something like brake cleaner or any suggestions?
@adzeikulio26208 ай бұрын
Please where can I get a new Vtech solenoid gasket ? I am in Ghana
@DivineKraze2 жыл бұрын
If my transmission feels like it’s jerking from 2nd to 3rd at low rpm’s, could this be the problem? In an automatic 08 ex.
@anarasii2 жыл бұрын
If this is the problem u will have a check engine light on w/ v tech code
@DivineKraze2 жыл бұрын
@@anarasii there’s no check engine light.
@robwright43982 жыл бұрын
The transmission fluid needs changed , just drain and add 2.5 quarts . Lots of video how to do
@agustinvalcarce26615 ай бұрын
Change the transmission filter as well. Then wait about 5 days and change another 2.5 qt I had the same issue and it helped a lot but remember to use Honda transmission fluid
@caseymackey7463 жыл бұрын
This came up as a code when engine light came on. How do i determine it can merely be cleaned and install a new gasket as opposed to being replaced?
@koskara1314 Жыл бұрын
Μπράβο πολύ φοβερό❤👍👍 pcr valve too, it’s there might as well do
@charlespayne19092 жыл бұрын
08 honda civic . 179k Thank you
@othmanesadiss66613 жыл бұрын
السلام عليكم ورحمة الله وبركاته تبارك الله سيدي أنس شكرا للمعلومات عطاك الله الصحة
@anarasii3 жыл бұрын
🙏🙏
@ericksandoval52012 жыл бұрын
I replace just the gasket But check engine still on Any suggestions Has same code p2646
@Way2EasyDIY2 жыл бұрын
The gasket is only going to fix a leak. You need a new sensor
@dylanslaunwhite6513 Жыл бұрын
Such a good video thank you
@zakariaamkoune27013 жыл бұрын
Keep going men
@sofana75753 жыл бұрын
Great job. Ty
@redpandapowa2 жыл бұрын
I just bought my vtec solenoid a couple months ago and my cars in limp mode again. I'm gonna try a new gasket and see if it works. 🙃
@mcboys5659 Жыл бұрын
could also be valve cover gasket if you are leaking out oil and you loose enough the vtec is operated off oil pressure so it will go im limp mode and not use vtec either hope its fixed
@anarasii Жыл бұрын
After market vtec never work for me .
@backyardbirderhd45623 жыл бұрын
How did you remove the bottom bolt? Why didn't you include that in your video?
@anarasii3 жыл бұрын
I can hold the phone and take it off on the same time. It’s simple 10mm
@backyardbirderhd45623 жыл бұрын
@@anarasii My bad! No joke, this engine I'm working on is SO covered in oil I couldn't find the bolt. I thought it was buried/hard to get to...y'know--something you'd want to include in a tutorial. But no...just completely camouflaged by a horrific oil leak.
@youngwildymcmb6472 жыл бұрын
How many pounds LB on each screw
@Rob-tx3jl Жыл бұрын
The German spec of guttentight should work
@noelmatos79273 жыл бұрын
I changed this gasket, and after 4 days I still see some spotting of oil on the ground 🤷♂️
@anarasii3 жыл бұрын
Clean the engine w/some brake cleaner and than check where is the oil coming from it maybe some else leaking.
@eddyx420 Жыл бұрын
Have you checked your oil pan? Head gasket?
@noelmatos7927 Жыл бұрын
@@eddyx420 well got rid of the car about 10 months ago lol