How to replace Hyundai Accent lock cylinder

[@larrys8742]

This worked for my son's 2012 Elantra. Ordered the part and watched your video. I can't thank you enough for posting this! Works like a charm and for those that are wondering, no programming was necessary.

[@jeffmacdonald3672]

I have been having issues with my 2010 accent, key will turn, lights on dash but no fire. Also having issues with steering wheel being locked and key not being able to turn. Wondering if replacing cylinder would help fix issue?

[@alilakhraichi3481]

Thanks man helped me out a lot was searching for videos but didn't find any. Worked on my hyundai i20 2011 so thanks.

[@minkus89]

Thanks for the video! They failed at stealing my gf's 2014 Elantra - replaced the back window and ignition assembly and it starts, but the instrument cluster (speedometer, fuel gauge) doesn't work now (along with shift interlock, which has an easy workaround). Tried unplugging the cluster, cleaning contacts, replacing fuse. The fuse socket isn't getting power. It did have moisture inside for ~1.5 weeks from melting snow. Any ideas?

[@Elthickythoy]

Wow 5 years ago and still helping someone 😊 definitely helped me hope it helps the next person😃

[@jeffreypetree7163]

I'm next 2009 accent possibly tomorrow 🗝️

[@GuyEmmerson]

I lost the key. Will this method still work without the key?

[@Unexpectedperspectivesnow]

Please help me if you can! I have a Hyundai Atos 2002 on which the key gets stuck when trying to turn to ignition and start position - it's totally blocked. The steering lock can be deactivated. Is there anything to do with the lock cylinder - or does it have to be replaced? The key is very worn but this problem came suddenly and without warning! Do you think the problem is in the actual key-thing where the key goes "into grip" or do you think it's the locking mechanism further "down" from there, so to speak. Please give me an advice if you can! 😪🥺🙏🙏 I should add that the key is "electronic" so it's probably "immobilizer" or something. We have some copies of the original key and they wont start the car.

[@Newfie73]

I have a 2011 accent that has the ignition locked up and I have to do the same thing this video is very helpful but I’m being told my key needs to be programmed wondering if you had to program the key when you change it out

[@minkus89]

I have a 2014 Elantra with keyed ignition, keyfob for doors/trunk/security, and got the immobilizer software update. I replaced the ignition assembly (cylinder and the assembly behind it that they also messed up while trying to steal it). I didn't have to reprogram a key - I use the key that came with the ignition cylinder/assembly to start the engine, and my original key/fob still works for the doors. I confirmed the software update still works.

[@67cici]

can you tell me what to order for the part thanks

[@vincentpotter5721]

Do u need to have the key recoded after this

[@rfto7437]

I would like to find video of installing piece between cylinder lock and ignition switch ..pcs what connect them..not sure what is name but i think inner steering lock..

[@samuelcantu2967]

Me too cylinder works perfect when in my hand but won't work when I install it

[@giannisrd]

Nice video, i own an 2001 Accent and have problems turning the key recently. But mine has an immobilizer antena that yours doesn't seem to have. Do you have any ideas for a procedure to program the new keys without any scan tool or special equipment?

[@NJS420]

I just had someone break a flathead off in my 07 accent, so im unable to turn it to acc, not sure what to do, i do have a replacement

[@Doug19752533]

Why does the key need to be in the acc position?

[@thomasmunguia7126]

Please need to know if not able to turn the key to acc cuz doesn't turn at all so what do I do ? Thank u 4 ur answer

[@bradbehning5592]

So it the lock is frozen, and won't turn to the ACC position what next?

[@Deadspotsapper6]

Take a pair of pliers (assuming you have the new cylinder in hand) press the key in and turn it

[@DiokengM]

@@Deadspotsapper6 wow this really helped 😎

[@arvindravichandar8993]

Can you please show how to remove steering wheel for Hyundai Accent.

[@chase1301]

What if they ignition is stuck in the lock position? Please help

[@briankelley7618]

What if you can't get the key in the Acc position? The reason we need to replace ours is because it's stuck in off position

[@JoshFg4]

Ever figure it out? Having this problem currently

[@nathanmontpetit9950]

@@JoshFg4 Same for me, i can't seem to turn the key at all and the ignition switch gets stuck when i try getting it out

[@Bootgnar]

Same here I pulled the whole ignition out bought the replacement part can’t get the inner part out because I can’t put it in acc mode

[@briankelley7618]

On ours we had to replace to pwr steering pump and as soon as we pulled it out, we were able to turn the key. You could try taking the belt off and then trying to turn it

[@Bootgnar]

@@briankelley7618 someone tried to steal my wifes car they tried to turn the ignition with a screwdriver so the whole face where the key goes in is mangled my situations a bit different unfortunately thank you for the response tho

[@LEHOKOSAMUELGAANAKGOMO]

im straggling to remove ignition of Hyundai accent 96 model 1.3 pls help me

[@eliteslayergaming]

I have a 2008 Hyundai Accent and I need to replace the ignition switch I’ve lost my keys and I need help

[@douglasrainear6587]

is my 2007 accent the same as the 2011 removal and which part # is it? I have been getting conflicting information and want to order the correct part

[@TheT3chneck]

Can u still do this without the original key? My girlfriends keys have been lost

[@yolandamedina5304]

Do u think its the same concept for 2017 sonata?

[@James-dt7ky]

Suddenly my key won't turn at all. I can't get it to the ACC position. Help.

[@maggiewertz891]

Does it have to be in accessory position when taking it out

[@sunnydeo123]

Mine is 2003 Hyundai accent even though it's older it didn't start with a new cyclider. So be mindful you might need to reprogram

[@tee-teewilliams4314]

How do you fix a radio in a Hyundai 2010 accent

[@samarigreen3822]

Will it work for 2017

[@janrico904]

how about the door key ?

[@mandydover1762]

What happenes if the new one isn’t lining up

[@mwiebz1]

How do you do it without a key ? Lost key.

[@jeannettelippmann4953]

I can't get the old pin to push in to pull out old cylinder

[@jasonc7823]

What if the key won't turn at all

[@the5wagners]

I followed the steps in this video, but I am still having problems. I can install the new cylinder, but I cannot get the key to turn. I do have the key in the ACC position. If I put the old one back in, I am able to move the key. I can move the key when the cylinder is out of the vehicle. I am not sure what I am doing wrong, any suggestions?

[@LehewTech]

Why are you replacing the lock cylinder if the old one turns with the key?

[@ClassicRich]

I have the same problem. Installed new ignition lock in the acc position and key doesn’t turn. Only turns when I remove the lock.

[@jclavero69]

Bro do you know where I can buy it? Ebay or something also I don't know the number part.. do you know the number?

[@kitt-kittstorm2080]

Juan Clavero go to rock auto.com and order the part there that's how I got mine and its cheaper

[@LalishaRiley]

How do I remove it without the key

[@clubduckkey]

My kid's accent got broken into and they shoved a screwdriver into the cylinder to try and force-start the car. Needless to say, the cylinder is FUBAR'd and the key won't go in. Any advice on how to remove the cylinder in this case?

[@JNSRfilms]

Did you find a solution? So frustrating, going through the same

[@morgantj]

Same for my sons. They key would no longer go in after it was broken into and they FUBAR'd the ignition. I was able to hammer the key in and then turn it to ACC to be able to push the pin to remove the ignition lock.

[@sdmcdiva69]

Thx sexy. You make me think I can do this myself. You’re awesome bro.

[@miansohaibanwar3248]

I would like to buy . Can you suggest me which online store best for this product

[@minkus89]

ebay

[@killeracidrain]

What do you do if the key you have doesn't match the cylinder. Pop lock said they would have to drill it out. And would run me 450. Lost my key seems whoever owned it before replaced everything key made with vin isnt a match. How could I remove the cylinder

[@minkus89]

You should be able to carefully jam something in (small lock pick tool? small flathead screwdriver?) to remove the cylinder from the assembly, then just replace the cylinder for like $25-$30 with one from ebay. I think.

[@frankmfeb13]

what do you do when your key won't even turn at all? I got the screws out but my key won't even turn. new cylinder should be in tomorrow

[@JNSRfilms]

Did you find a solution? Same thing happening for me

[@frankmfeb13]

@JNSRfilms yeah, I sprayed it with wd 40 the lithium grease one, and tapped it with a hammer.

[@rezjrprod]

How much was your cylinder and where did you get it I need one for my 2009

[@minkus89]

ebay, rockauto

[@petethehawk5186]

So will the old keys work in the new ignition when replacing or do you have to get new keys made? My girlfriend has a 2010 Accent and twice in recent months had to get it towed because the wheel locks. First time eventually got it going but it's happened again and so far it won't unlock. So guessing need to replace this part. Thx

[@LehewTech]

The new ignition assembly comes with keys

[@ElmoUnk1953]

I took mine to a locksmith to set it for the original key that fit the doors. There’s another KZbin video that shows how but I didn’t have time to mess with it.

[@minkus89]

Unless you also change out the cylinders on all the doors, you'll use the new key that comes with the cylinder to start the car, then the old keys/fob will still work for the doors.

[@coronacorona8605]

Thank you helped me a lot

[@Mark64]

Hey thanks for this, I have a 2008 Accent, and I'm being told that I can't replace the lock cylinder (new part with new keys) myself because the new keys would need to be programmed to the immobilizer or something like that. Can you confirm? It doesn't seem like you had to do anything like that in this vid.

[@LehewTech]

I doubt that! Let me know if that's the case tho. I had no such issue.

[@samuelcantu2967]

U can do it your car doesn't have a chip. Did it to my 2010 accent

[@toddmconley]

Can you remove a steering wheel when its in the locked position?

[@LehewTech]

+Todd Conley Yea you should be able too.even if you get the wheel off and the plastic covers out you still have to turn the key to remove the lock cylinder. I would focus on getting the lock cylinder to turn over. Let me know how you resolve this.

[@samuelmarcano2974]

My key is not going all the way to ACC and i can't get it out. I can still start the car and drive with it. Im guessing is the cylinder.

[@LehewTech]

Yea most likely

[@wanlieb773]

Video doesn't work for one that's already locked. Which is kind of the whole point we are coming here most of ours are Soo bad they are locked. Cool video but you basically fixed something that wasn't even broken because your ignition switch isn't locked (fucked) like ours.

[@jechapple1]

I have a 2011 with a chipped key that will not turn at all...how important is it to be in the ACC position? And do I need to order a chipped key replacement cylinder?

[@jechapple1]

btw thanks for showing my I can do this myself :)

[@rubengonzalez5903]

I didn't see the answer,, does it have to be in the acc position to take off the cylinder?

[@jcswain1002]

I also need to know I can’t turn it to the acc but my steering wheel is unlocked

[@reoffending]

Kia boys got a new method

[@dancindavey1515]

How bout some wd- 40? Easy fix the way you did it. Would wd 40 at least be a temp fix?

[@LehewTech]

It might be! Good luck

[@dancindavey1515]

Lehew Tech Wd didn’t do much. Too much weight on key chain was problem. I just lift up on the key and turns with no problem. At least now I know how to rpl it when it finally goes. Thanks. Good video.

[@toddmconley]

What do you do if the steering wheel is locked and you cant get to all three screws?

[@LehewTech]

+Todd Conley Id call a locksmith. I dont know of any way to easily remove the cylinder once it is totally seized. Try bumping the key and make sure that the wheel is not under pressure by turning it side to side while bumping the key. Good luck

[@toddmconley]

I got it done. I had to get a new key from a code at Hyundai. That made the ignition turn to where I could access the three screws. The rest was easy. Thanks. It was all in all a bad key and a bad cylinder. Double bad luck.

[@toddmconley]

Thanks for the video by the way. I'm sure it saved me a bunch of hassle and money.

[@LehewTech]

+Todd Conley Nice glad you found a solution

[@icejonesjones919Gaming]

Best video

[@Crackerssouth]

Have to do this to our daughters Accent, not I know how, thanks

[@samuelcantu2967]

If I push pin from the lock cylinder will it enable me to turn locked key to accessory so I can pull cylinder out

[@rongeneius]

Good question as I cannot turn my keybto the acc position

[@memeladybug1879]

I have a 2009 Accent, but my key won't go to the ACC position at all, what can I do to get it there to replace my cylinder?

[@LehewTech]

+meme Ladybug Do you have a spare key you can try? If not then try bumping the key or getting a new key cut if the one you have is worn. I assume that your steering wheel is not turned up against the lock cylinder.

[@memeladybug1879]

finally got it to turn with my spare key that I had made, after playing with it a while and made sure wheel wasn't turned, feeling very accomplished, thank you so much, now I have my car up and runing again....woohooo....so happy

[@LehewTech]

SWEET glad youre on the road again

[@rynowizz8751]

Having same problem. I've tried eveything.. don't know what to do now l

[@lazizak6064]

How much did u buy the ignition switcher ?

[@rachdisoufien798]

but if have hyundai accent 2010. Will be Good too ?

[@LehewTech]

+RACHDI SOUFIEN yea no problem

[@mstrackbein]

Thanks dude!! Saved me a tow and a trip to the mechanic. Post your cash app name and I’ll send you money for a beer!

[@LehewTech]

Glad to hear that! Its $lehewtech

[@toddmconley]

Been trying to wiggle and bump and pull for about an hour. Just not happening.

[@LehewTech]

+Todd Conley You made sure that the steering wheel isnt up against the lock? On most cars the key is impossible to turn if there is pressure holding the steering wheel up against the lock like if you park with a wheel up on a curb.

[@rachdisoufien798]

d'ont need to program the new key ? Just setup the New cylindre.

[@LehewTech]

+RACHDI SOUFIEN no programming needee

[@nathinsibanyoni8344]

What about 2013 i20 model? Does the key need programming?

[@kerajo6728]

Ignition switch it self please

[@melvindelapena826]

Hi is this same with the 2006 Hyundai accent??

[@daniluchison]

Melvin Delapena Once u remove panels, all ignition tumbler/cylinders have the same release mechanism. Search for other videos like Hyundai Sonata and u will see the process is the same.

[@melvindelapena826]

@@daniluchison ok sir thanks a lot

[@mikezeigler1]

Yes I just did it on my wife's 2006 accent.

[@melvindelapena826]

@@mikezeigler1 manual trans sir?. No need to program?

[@salllam4]

Thank you

[@elclub3746]

$. ???

[@elclub3746]

Cuántos dolares costo la chapa

[@hamoody3]

thanks

[@kerajo6728]

Not the key

[@felixsantiago8230]

💪🏽

[@josueabarcavenegas]

Excelente tank

[@felixsantiago8230]

💪🏽💪🏽👍🏼

[@ناصرالقحطاني-ص2و]

الوه كيف فصلته

[@toddmconley]

Steering wheel is locked, key is stuck in the lock position lol.

[@samuelcantu2967]

I have a 2010 accent if you push the pin from the lock cylinder will it enable you to turn key to accessory so I can pull it out

[@samuelcantu2967]

Is there some kind of spring that goes between key cylinder and the housing

[@Svinota77]

Не пел давно и спел говно) Перевод не передаёт смысла фразы(

[@LehewTech]

+Сергей Коннов картофельный фермер трахает лицо.

[@ناصرالقحطاني-ص2و]

Snap : qb_wq

[@_A_343]

Thanks