How to Replace Idler Arm Assembly 2000-06 GMC Yukon

Buy Now!
New Idler Arm Bracket Assembly from 1AAuto.com 1aau.to/ia/1ASI...
If you have to replace the idler arm in your vehicle, odds are, you’ll need to replace the bracket too. Best to get them both done at the same time! This video shows you how to install a new idler arm bracket in your 2000-06 GMC Yukon.
• Buy TRQ at 1AAuto.com: www.1aauto.com...
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• 21mm wrench
• 15mm Socket 1aau.to/ogk/1AX...
• 21mm Socket 1aau.to/ocD/1AX...
• 24mm Socket
• Air Compressor
• Idler Arm Puller
• Pickle Fork
• Side Cutters
• 1/2 Inch Air Impact Gun 1aau.to/o2/1AXA...
• Torque Wrench 1aau.to/odS/1AX...
• Cotter Pin
• Rust Penetrant
• Sledge Hammer 1aau.to/obh/1AX...
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@matthewconnor399]

Great video! Easy to follow and very thorough.

[@Jamesiscrazy12]

Does this work for suburbans as well?

[@jeremiahgolden1889]

No torque specs?

[@jeremiahgolden1889]

For pitman arm I mean