How to Replace Intake Manifold Gasket 08-12 Ford Escape

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@derekfordyce9]

Andy is a treasure. Awesome presentation. And props to the camera person too.

[@sekarkulandaivel368]

To do this on an I4, it is much harder, especially to change the PCV that's located behind the intake. 1A Auto has a video on a Mazda that's around an hour with very similar steps. Unfortunately, the 4-cylinder Escape doesn't have enough space to reach the intake bolts unless you remove the cooling fans. Took us about 5 hours to change the PCV valve. Couldn't have done it without these videos!

[@1AAuto]

+Sekar Kulandaivel Thank you for your feedback!

[@mitchanator0999]

im going to follow this video tomorrow. I have to replace the back 3 coils, spark plugs, and cyl 1 fuel injector. the intake has to come off and this video will be super helpful in taking it off and back on. thx for the video.

[@Iseeyoumane]

Was it making a ticking noise

[@davidoren6602]

I'm actually replacing the #6 cylinder injector... The question I have: do/should you replace all six injectors just because it's such a long and difficult process to get to one???

[@metallwerkbar7975]

FYI, the intake assembly is different in the 2008 because they hadn't added VVT to the heads yet. Your airbox will be on the driver's side of the engine, but the procedure is the same.

[@thisguy2603]

What is the hose at the 4:27 mark?

[@steveday2868]

Im needing this done on my 4 cylinder i bought last summer. But im thinking it would be better to take the car to the scrap yard. As the transmission is acting up, the seat belt tensioner just exploded on the passenger side today and the Ac doesn't work. Piece of junk.

[@jjabrethren]

How much torque for a 3.5 litre engine?

[@1AAuto]

+Jonnie Jones This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com

[@jjabrethren]

Oh I meant to say for The upper intake manifold bolts. What will the torque be on a Ford Edge 08 3.5 litre? Thank you