How To Replace Intake Runner Control Valve 2004-08 Mazda 6

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/43/e/intake-manifold
In the video, 1A Auto shows how to replace a stuck or jammed intake runner control valve. The video is applicable to the 04, 05, 06, 07, 08 Mazda 6.
This process should be similar on the following vehicles:
2003 Mazda 6
2004 Mazda 6
2005 Mazda 6
2006 Mazda 6
2007 Mazda 6
2008 Mazda 6
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/orQ/1AXAA00013
• Phillips Head Screwdriver 1aau.to/orQ/1AXAA00013
• T25 Driver 1aau.to/odo/1AXAA00008
Subscribe: / @1aauto
Check out our playlist:
Mazda 6 2002-2007 1st gen GG1: • Mazda 6 2002-2007 1st ...
For More Info visit us at 1aau.to/h/DS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@HelicopterDr]

Wish you would do a 2009-2012 mazda 6

[@cheymccoy6967]

Hello , I have a 07 Mazda3 that I’m working on & this is one of the parts I have to replace . I only got one , I wasn’t aware that you should do both together . What complications would I face if I just replaced the one that was bad ?

[@carlosbanegas7577]

thank you

[@1AAuto]

+carlos banegas Thank you!

[@arnolddayrit6583]

This p2009 Can effect the radiator fan not working?

[@kealebogagaolemogwe2245]

Mazda 6 check engine light is on. Diagnosing machine shows code P2009. Help me to attend the problem

[@1AAuto]

+Kealeboga Gaolemogwe We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@dyuile4492]

i have a 2002 mazda 6 that has been scanned and came up with the code p2009, also my engine light is on but goes off after each reset only to come on again. my question is, is this an option i can try to address my problem? cheers. Also the proper wording i have from scan is ( intake manifold runner control, circuit low.) :)

[@joshuadaniels9863]

Did you ever fix this?

[@nelsoncossa5784]

Estou a passar Mal preciso muito dessa peça como posso Fazer para ter a mesma

[@nicmereles]

Do you have a video for the cx 7? 2007

[@1AAuto]

+Nic Mereles We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

[@kingkarl2561]

Where can I get the two lower hoses that go to the two valves? I have been unable to find them...

[@1AAuto]

+Jared Rose Hello, a good way to locate harder to find parts is by getting the original equipment part number from the dealer. A search online will bring up places that carry it for you. Thank you!

[@georgim2741]

If I understood you correct, you need just a vacuum hose, a silicone one. Buy one-two meters and use how is needed.

[@mkatalin09]

the link for that part is wrong...

[@texas420james8]

Is this the part that causes code p2009 to show up

[@1AAuto]

+texas 420 james There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Thank you.

[@cedanecox5733]

Hello 1A Auto. Can a bad intake manifold tunner valve cause my car not to start? I have a 2011 mazda 6 that shuts down and will not start. I got it scanned and a code P0661 was found. Can this cause my car not to start?

[@1AAuto]

+Cedane Cox Thanks for checking us out! While we cannot say for sure this is the only reason your vehicle won't start, a bad valve can absolutely cause your vehicle to not start. We would definitely recommend having this checked out to see if this is the main cause or if there are other underlying issue causing this issue. 1aauto.com

[@cedanecox5733]

@@1AAuto Thank you.

[@Chico_Brownie]

Do you happen to live in a cold area? Im having the exact same issue. My car would randomly just not start. Same code p0661. One of the symptoms is cold start issues. I just bought 1 intake manifold valve

[@williambearden7952]

Is that not the solenoid not the actual valve.

[@adamaaburmeileh9668]

is this similar to the 2007 Mazdaspeed6?

[@1AAuto]

+Adam A Aburmeileh We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. Hope this helps you out

[@intelektomcEgoDeath]

I have code P02009 Replace Tumble control valve can you show a video for this please? 2005 Mazda.6 2.3L i

[@adolfsandoval3376]

Did i find out? Lol

[@johnnyversaci7091]

Symptoms of the problem would help people🤷🤷🤷

[@1AAuto]

+Carl Granese Thanks for the feedback!