How to Replace Leaf Spring Rear Shackle Bracket Repair Kit 1992-1996 Ford F-150

Buy Now!
New Leaf Spring Shackle & Bracket Repair Kit from 1AAuto.com 1aau.to/ia/1ABM...
New Leaf Spring Shackle & Bracket Repair Kit from 1AAuto.com 1aau.to/ia/1ASM...
This video shows you how to install a leaf spring shackle bracket repair kit on your 1992-1996 Ford F-150.
This repair was done on a 1996 Ford F-150 XL 4.9L Standard Cab Pickup 2-Door RWD Manual and the process should be similar on the following vehicles:
1992 Ford F-150
1993 Ford F-150
1994 Ford F-150
1995 Ford F-150
1996 Ford F-150
Tools you will need:
• 15mm Wrench 1aau.to/oSL/1AX...
• 16mm Wrench
• 17mm Wrench 1aau.to/oSL/1AX...
• 18mm Wrench
• 19mm Wrench 1aau.to/oSL/1AX...
• 21mm wrench
• 15mm Socket 1aau.to/obkM/1A...
• 16mm Socket 1aau.to/obkM/1A...
• 17mm Socket 1aau.to/obkM/1A...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Ball Joint Press
• 7/8 Inch Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/oa3d/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obkM/1A...
• Torque Wrench 1aau.to/oayg/1A...
• Gloves 1aau.to/oTo/1AX...
• Safety Glasses
• Floor Jack 1aau.to/oYh/1AX...
Subscribe: / @trq
Check out our playlist:
Ford F150 1992-1996 9th Generation: • Ford F150 1992-1996 9t...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@larrytate5605]

wish there was a mechanic in my area as good as you are. thanx for sharing.

[@kodalife8642]

Thank you for this video 😊

[@Chuck_S]

Wish you had a video on the replacement of the factory brackets. The ones that are rivited on.

[@TRQ]

+@Chuck_S We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@adlerstrohkirch6191]

Great video. Thank you+

[@terrythomas-q2j]

Good job 👏 👍 👌

[@grayv-horse3443]

These videos are good n all, but it’s always frustrating for me when everything seems to go sooo perfect for them, on top of having every 1000+ cost tool in the market. Everyone, grab your A frame lifter, your super gugadumper, and flusterhump gigchig, special Tesla oil heatereater and just do it. It’s easy. Here I am. I have to cut each bolt with an angle grinder to release the leaf spring from its ceased bushing, blowtorch bolts, blowtorch bushing rubbers out, punch out the bushing cups, then press new ones in. For gods sake, they even got an electronic torque wrench. I’m doing this in the goddam rain and mud just cuz goofs n gaffs, not at all cuz it’s critical or nothin.