How to Replace Lower Ball Joint 1992-1996 Ford F-150

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ib/1ASB...
This video shows you how to install new, quality TRQ ball joints on your 1992-1996 Ford F-150. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
1992 Ford F-150
1993 Ford F-150
1994 Ford F-150
1995 Ford F-150
1996 Ford F-150
Tools you will need:
• 13mm Socket 1aau.to/obma/1A...
• 15mm Socket 1aau.to/obma/1A...
• 18mm Socket 1aau.to/oab7/1A...
• 21mm Socket 1aau.to/oab7/1A...
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/ohP/1AX...
• Pliers
• Snap Ring Pliers
• Air Chisel 1aau.to/obt/1AX...
• 7/8 Inch Socket 1aau.to/obe/1AX...
• 1/2 Inch Ratchet 1aau.to/oab7/1A...
• 1/4 Inch Ratchet 1aau.to/oa3w/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obma/1A...
• Torque Wrench 1aau.to/oayA/1A...
• 1-1/8 Inch Wrench
• 3/8 Inch Wrench
• Gloves 1aau.to/oTP/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@bakedpotato108]

If you came to the video for torque specs like I did... Lower Ball Joint: 58ft lbs Upper Ball Joint: 97ft lbs Tie Rod: 63ft lbs

[@Aidencmz]

I'm liking these old f150 videos. Thanks!

[@Goosygus]

Im going to do a complete front rebuild on my f150 and this is a super helpful video

[@bobv8219]

Very well done miss, you make it look easy.

[@rustyshacklfort9508]

I’m so glad I don’t live up north

[@robbobsjobs8456]

Love the OBS Ford series

[@AlLMyMaDArT-vf7ur]

Other than that rotor...I'd swear you fished that chassis from the bottom of a river

[@robbobsjobs8456]

It'd take half a day with a wire wheel an a can of paint to revamp that sea ramp queens undercarriage

[@edmundocordero6031]

Toma tu like joven

[@pastorcarl5703]

Outstanding informative detailed video. Thank you. God Bless!

[@rlinc265]

Very impressive... Thank you!!

[@ftnrbhmwk]

I need to know the name of the penetrating rust spray? Thank you. Excellent video as always.

[@marxfish]

I'm using your vid to replace the ball joints on a 94 RWD. The new top joints have a rubber boot that won't compress enough to seat the eccentric fully. Any ideas? Thanx

[@MrJd829]

Does the car need to be aligned after doing this

[@ToyManFlyer1100]

😭😭😭😭😭.....I'm totally 😭😭😭😭!!!!.... My 1993 Ford f150 5.0 truck is in need of all this work done...Bearings, Ball joints...top and bottom....Tie rods, power steering pump and steering wheel shaft...😭😭😭😭...AND I GOTTA DO ALL THIS ON THE SIDE OF MY CURB....!!!... NO POWER OR AIR TOOLS...!!!....😭😭😭😭😭😭😭😭😭😭😭!!!!UGGGHH AND DOUBLE UGGGHH!!!!

[@rogeliobravo8057]

👍👍