How to Replace Lower Control Arm 2015-2019 Hyundai Sonata

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASL...
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2015-2019 Hyundai Sonata. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata
Tools you will need:
• Pry Bar 1aau.to/oI9/1AX...
• 17mm Wrench 1aau.to/oLN/1AX...
• 19mm Wrench 1aau.to/oLN/1AX...
• 10mm Socket 1aau.to/oaMI/1A...
• 17mm Socket 1aau.to/oa4W/1A...
• 19mm Socket 1aau.to/o25/1AX...
• 21mm Socket 1aau.to/o25/1AX...
• Air Compressor
• Needle nose pliers 1aau.to/ox2/1AX...
• Needle nose pliers 1aau.to/ox2/1AX...
• 1/2 Inch Impact Gun 1aau.to/onD/1AX...
• Ratchet 1aau.to/obgo/1A...
• Swivel
• Torque Wrench 1aau.to/oam6/1A...
• Drill
• Gloves 1aau.to/oAq/1AX...
• Safety Glasses 1aau.to/ouu/1AX...
• Floor Jack 1aau.to/oQx/1AX...
• Jack Stands 1aau.to/oLw/1AX...
• Pick 1aau.to/oEw/1AX...
• Pole Jack
• Rubber Mallet 1aau.to/ofi/1AX...
• Sledge Hammer 1aau.to/oLB/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@baseballthird13]

so im seeing is just easier to by the control arm with ball joint. instead of just ball joint

[@markc2157]

How far up do you lift the suspension before torquing it?

[@JamesGroves-v9u]

Great video. I have been watching all these suspension videos because I have to replace all the suspension parts. Would you be kind enough to reply with the order of disassembly on my 2019 Hyundai Kona? I can't find a video for that. Thanks!

[@4spdragtop]

Great to the point video! I'm assuming when applying load to control arm that you jack up until car frame starts to rise?

[@mohammedsuboh1420]

Good work🤍

[@cgunarathna9157]

Thanks

[@ashleyf5901]

Is there a specific size cotter pin for the control arm? If so, what size?

[@Howe_Low]

On the off chance I’ll actually get a response 😂 I can’t find anything about replacing JUST the bushing on the rear lower control arm on this sonata? I know it’d be easier to just replace the whole thing but that’s not what we’re doing

[@TRQ]

+@user-jl5gt4ft1x We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ