Рет қаралды 135
Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ib/1AST...
This video shows you how to install new TRQ outer tie rods on your 2010-2013 Kia Forte Koup. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
Estimated installation time for a professional technician is approximately: 24 minutes
This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup
Tools you will need:
• Pry Bar 1aau.to/oafS/1A...
• 21mm wrench
• 17mm Socket 1aau.to/ocsj/1A...
• 21mm Socket
• 22mm Socket 1aau.to/ovG/1AX...
• Brake Caliper Hanger 1aau.to/ooz/1AX...
• Wire Cutters
• Torque Wrench 1aau.to/obtx/1A...
• Gloves 1aau.to/obCr/1A...
• Liquid Thread Locker
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oaLM/1A...
• Hammer
• Jack Stands 1aau.to/oayg/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.