Cleanliness is very important when working with engines Keeping those gritty carbon in piston skirt is a sure way to run into problems later on
@PeterFinnTheCarDoctor4 жыл бұрын
Great point!
@tfarata1993 Жыл бұрын
Hi Peter, so the oil ring doesn’t matter which side facing up??
@PeterFinnTheCarDoctor Жыл бұрын
Right
@elliotdikane Жыл бұрын
Some said rings cannot be replaced on a corolla d4d diesel engine 1.4 2015 gor compression. How far true is that?
@PeterFinnTheCarDoctor Жыл бұрын
Thanks 👍
@aidankirby84123 жыл бұрын
2002 Toyota Camry 2.4 4cyl. Can I replace rings only and is it a fairly easy repair? Thank you and Cheers....
@PeterFinnTheCarDoctor3 жыл бұрын
Yes. Only rings is Ok
@3kkk5143 жыл бұрын
Can you remove piston ring under chassis by removing oil pan without taking out the whole engine in audi a4 b7 2.0tfsi
@PeterFinnTheCarDoctor3 жыл бұрын
HI I think you need to remove the engine of your Audi. Audi is bytheway great car.
@charlesmungenyuko51972 жыл бұрын
Sir we are asking for a torquing bolt chart for example when you are assembling a Toyota Corolla engine 5A FE
@PeterFinnTheCarDoctor2 жыл бұрын
Ok
@thomasgodwin68902 жыл бұрын
What's the name of this product of the rings?
@PeterFinnTheCarDoctor Жыл бұрын
Nippon piston ring
@soulfreem3 жыл бұрын
How you can identify the latest variation of 1zzfe with the upgraded pistons that don't burn oil. I want to swap engine and want to buy the new version that don't burn oil
@PeterFinnTheCarDoctor2 ай бұрын
Thanks for comment 😀👍
@alvinmbindyo75874 жыл бұрын
Very informative video. Thank you very much.
@PeterFinnTheCarDoctor4 жыл бұрын
You are welcome!
@ramyattia21926 жыл бұрын
Hi mr peter can you tell me what clearanc number... of piston ring 2e engine Black ⚫️ machine... Piston rings clearance toyota e11 2E engine
@Shumayal4 жыл бұрын
does the new oil ring have bigger holes?
@PeterFinnTheCarDoctor4 жыл бұрын
No
@coolissimo698 жыл бұрын
Thanks Peter , all the best
@mrfixit-wb5qb6 жыл бұрын
Did u have to hoan out the bore before u put in the piston
@PeterFinnTheCarDoctor6 жыл бұрын
No. But hoan is Ok too. :-)
@BIONDIEST11 ай бұрын
my car has a misfire on 4 and i cant tell if its the head gasket or the cheap piston rings they put in the 2009. runs rough and makes noise... new spark plugs and coil didnt fix it at all.
@PeterFinnTheCarDoctor11 ай бұрын
Thanks for comment 😀👍
@juwondaramola87102 жыл бұрын
Very educative thanks. Pls how can I get highly quality pistol and ring.
@PeterFinnTheCarDoctor2 жыл бұрын
From dealer
@MrBrussell944 жыл бұрын
1azfe/fse uses the same piston rings? I was told the 1az fse oil ring separator is smaller than the 1az fe. Is this true?
@PeterFinnTheCarDoctor3 жыл бұрын
That is correct
@80sPhoenix3 жыл бұрын
hi mate, is this 1zz engine or similar ?
@PeterFinnTheCarDoctor3 жыл бұрын
Hello my friend iGarage. It's similar. Have a nice weekend.👍
@TechBrewGamer Жыл бұрын
Thank you for the video. Berrymans Chem Dip would make quick work of all that built on grim.
@PeterFinnTheCarDoctor Жыл бұрын
Great point!
@mikeyjohnson16966 жыл бұрын
Did u gap the top 2 rings?
@PeterFinnTheCarDoctor6 жыл бұрын
Yes
@burakurun25737 жыл бұрын
Hi buddy, I wonder is this same for 1995 1.3L corolla engine? engine family 2E
@PeterFinnTheCarDoctor7 жыл бұрын
Same idea
@linkup901ify5 жыл бұрын
I think my car has a problem and needs these changed. I'm going to try some of oil leak stopper first, but if it doesn't work then I'm just going to drive the thing into the junkyard and walk home.
@geoffreygrant9525 Жыл бұрын
Did you ever take it to the junkyard?
@linkup901ify Жыл бұрын
@@geoffreygrant9525 Sold it for $800 along with the engine issue. Got a police report months later that it was never registered and was found abandoned.
@georgepearsall18175 жыл бұрын
Hi Peter thanks for all your helpful videos. I have a 99 Corolla with the oil consumption problem. Would I be able to fix this problem with replacing just the rings or should I replace the pistons also
@PeterFinnTheCarDoctor3 жыл бұрын
Hi George and thank you. Rings. Take care and smile. 😀
@peternjenga61002 жыл бұрын
Rings only
@KillerBOZombie8 жыл бұрын
once again great video. i see your english is getting better ;)
@PeterFinnTheCarDoctor7 жыл бұрын
Hi and Thanks. Your comments have improved my English skills. :-)
@llynwa62836 жыл бұрын
Can i know the symptoms of bad piston rings please?
@PeterFinnTheCarDoctor6 жыл бұрын
Yes: poor oil quality, long oil replace periods and no oil filter replace, no air filter replace
@llynwa62836 жыл бұрын
Peter Finn my tuck is emitting kind of white smoke.. Can i get some help please? -when at idle... The smoke comes out only at high rpm.. And the truck starts as a charm without any smoke -when driving, the smoke comes out after changing gear and accelerating then smoke emission stop when the truck goes smoothly -the smoke also comes when driving as if uphills and then stops on flat roads Any suggestions on what could be the problem please?
@zhangfrank50867 жыл бұрын
How much will cost to change this piston ring in a shop?
@PeterFinnTheCarDoctor7 жыл бұрын
About 1000 US$
@thomassubin6137 Жыл бұрын
Great nice to learn from you thank u.
@PeterFinnTheCarDoctor Жыл бұрын
Thanks for watching!
@luram868 жыл бұрын
Peter does this work for a 1994
@PeterFinnTheCarDoctor7 жыл бұрын
Yes, also in 1994.
@mhmoodemad1243 Жыл бұрын
ماهو افضل زيت للكورلا 1995 ممكن صوره
@PeterFinnTheCarDoctor Жыл бұрын
Noted 👍
@ebonhawken5749 ай бұрын
This is like car repair ASMR
@PeterFinnTheCarDoctor9 ай бұрын
Thanks and noted 👍
@MultiOscarPacheco2 жыл бұрын
To be onest need more focus and more light But good video sir
@PeterFinnTheCarDoctor2 жыл бұрын
Noted 👍
@mhmoodemad1243 Жыл бұрын
مرحبا كيف حالك لديه گورلا 1995 تصرف وقود مع ذالك غيرت بخاخات بلكات كلاص بانزين فيت بم
@PeterFinnTheCarDoctor Жыл бұрын
Noted 👍
@arunayuven21024 жыл бұрын
Thanks
@PeterFinnTheCarDoctor4 жыл бұрын
Welcome
@TheRafy1273 жыл бұрын
He dint even check the piston gap or the bore how the f!@ck he knows that the pistons rings have the right mm of gap !!
@TheRafy1273 жыл бұрын
And if you put new rings on a old piston your not fixing the problem at all get new piston hone the cylinders measure the bore of the block check the gap of the piston rings and then assemble everything but always check piston to wall clearance ring gap and bore size !
@priusgame11783 жыл бұрын
@@TheRafy127 yeah I talked to a machine shop they said the same thing you just did. Some guys just post videos for views and leave out the discouraging extra stuff. I'll be doing my engine after hoan and measuring to go up a size possibly if needed.