How to Replace Rear Brakes 03-07 Cadillac CTS

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@BrentConnorIsBestConnor]

This video was really well done. 100. Tony and Matt were awesome, and I really like the format of the video where Matt was doing the work while Tony explained it.

[@kimpicazo-uh9gz]

I was absolutely amazed at how quick he was when loosening those bolts .. . Nice work .!! Lol

[@outdoorsoregonian9464]

I just bought a 04 caddy so these videos will come in handy for sure....

[@1AAuto]

+Modern Men Thank you for your feedback! We are happy we could help.

[@danielberganini7110]

My 2004 CTS has a 17mm bolt for the caliper, not a 13mm. The other bolts and torx bits are the same as listed in this video. Great video! Thanks!

[@ClaseLola1961]

Great video. May I suggest that at the end of the video you warn the viewer to start the car, keep it in park and pump the brake pedal several times to reset the correct pad adjustment before moving the car.

[@FloridaBoy9411]

That's common sense

[@TaijiArban]

@@FloridaBoy9411 true but some people are doing this for the first time and may not know this rule

[@seana.5269]

I would be one of them, thanks for the comment. I’ll be working on my own brakes so I’ll definitely do that

[@AzamisBox]

this video may be 8 years old but my father passed and i would always work on his 07 cts with him seeing this gives me the confidence to do it by my self thanks alot guys watched the center carrier bearing video too and did that with my brother! up next is the coil packs!

[@jesusherrera8646]

I’m fixin my whole car up based on their videos😂good content

[@1AAuto]

+Jesus Herrera Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@miketolbert7065]

They made a mistake. On this model the rear brake pads are not the same as with the front. The rear pads have one with 2 warning clips and one with none. The one with the clips goes on the inside next to the piston. The one without clips goes on the outside. They put them on backwards. I thought they would've changed after they saw the caliper, but they didn't. Look close, the outside "fingers" of the caliper are pressing against the clips. This will press the clips in against the rotor and make it squeal.

[@johnsmith67854]

Would you suggest putting grease on the caliper bolts when re installing ?

[@svensk2003]

Excellent instructional video. Thanks!

[@1AAuto]

+Thufir Hawatt Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/search?q=brakes&year=2005&model=921&KZbin&CTA+Comment&Qz4pwB4BWoA

[@alejandroroal990]

Wow! What a great lesson. Thank you very much for this excellent video.

[@eelcogg]

Excellent instructions, very clear and concise. That wheel is looking a little sad though :(

[@kimpicazo-uh9gz]

Lly it was very helpful. . found out what I was looking for .thank u

[@bobcobain3507]

Whata great video.. Well Done!

[@dennisfalan1623]

Do any of the CTS have twist in pistons My 05 with sport package pistons move out and pads have worn evenly but I can't get the piston to retract with C clamp and old pad. I Bent handle on my heavy duty C-clamp.

[@lloydboca6]

To Compress Piston Use C Clamp with a 1/2 inch piece of wood in front of piston then tighten. Result return piston to original position without damage.

[@dennisfalan1623]

You can use the old pads that's what I do

[@she5152]

Wow! I tried doing brakes years ago, it was all so confusing to me. Whatever I did I started driving out the parking lot and the pads or calipers , springs or something fell of the brakes.. This is n excellent teaching on how to do brakes. I am buying a used 2010 CTS this week so this video is just in time..thank you!

[@I_am_a_cat_]

Okay but what if I don't want to remove the rotors? Do I not need the hex bit? Do I just take thr caliper off?

[@dantaylor9528]

does the 2004 cts uses the same tool as the one in the video?

[@1AAuto]

+Dan Taylor We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application.

[@danielberganini7110]

Did the brakes on my 2004 CTS today. It has a 17mm instead of 13mm bolt for the caliper. The 18mm bolt and T30 torx are the same.

[@BlackouTTProductions]

Most are the same from 03-07 the first generation Cadillac CTS

[@codyminnick3282]

Hey man , im having a huge problem my caliber bolts will not budge , what can i do

[@1AAuto]

Hello! We are sorry to hear you are having this issue! We recommend that you try using a penetrating spray, allowing it to sit for 15 minutes, and trying again. Please let us know if you have any further questions. +Cody Minnick

[@ericushibeatz]

Thank you Great video

[@1AAuto]

Thanks for checking us out. 1aauto.com +Ericus Hi Beatz

[@loganwork7024]

I changed my break pads and now it makes a horrible squeal and the breaks won't disengage fully. Anyone had this happen?

[@Yendor2319_]

Will this work on the 2008 year

[@boodlehopper]

Nice video and your a cool dude !!

[@1AAuto]

Thanks for checking us out. 1aauto.com +James Walters

[@3GreatPyreneessiblings]

What do I do if there is a pin freeing and not moving like its supposed too???

[@manuelrivera31]

Yeah I noticed one thing while watching this video when the Pistons were being a pressed in with the channel locks you can scar the piston and tear this tear the boot and the seal that is not the correct way to do that they make a tool for it

[@AndreaLopezPeyton]

My new rear brakes came with a black ceramic brake pad cover of some sort. Its easy to slip on and off, do i keep it on so its sandwiched between the caliper and brakes or do i remove it? Its a super thin black cover that came on the back of my brakes.

[@markruge3785]

, I need to replace e brake on 04 SRX Cadillac

[@bondiniabrown2536]

i need to know how to fixs on a 2012 cts

[@1AAuto]

+Bondinia Brown Thank you for watching. On the 2012 model, please view our video kzbin.info/www/bejne/j3XYdKGDgpp4btE as it will be almost identical to what is on your vehicle. 1aauto.com

[@richardpetersen3980]

I need to know how to change a 2014 cts coupe

[@monkkayllc446]

When doing video why not a video on fixing and adjusting E brake for all car you do brake jobs on

[@peterb695]

Ya it helps.

[@r-traain]

Great video.... that ending was corny tho 😂

[@eriramirez3634]

Thank you

[@dennisfalan1623]

nice

[@punpunproductions1579]

Don’t forget to build pressure before taking it on a joy ride 😉

[@loganwork7024]

What does this mean? I did something wrong lol now my breaks won't stop engaging

[@jayjensen4708]

There’s just one problem...you forgot to tighten the T-30 Torx screw before putting the wheel back on!

[@bluefrog8670]

13:48

[@jth1987leb]

Brake shims and hardware should always be replaced with new

[@bluefeathercalnimptewa4307]

My question is, on my 03 Cadillac CTS the front caliber's are set to the back" is it set right or wrong - the same goes with the rear caliber's are set in the front, to me it looks off. Help me please"