How to Replace Rear Drum Brakes 1994-2004 Chevrolet S-10

Buy Now!
New Brake Shoe & Drum Kit from 1AAuto.com 1aau.to/ia/1ABDS00073
This video shows you how to install rear drum brakes on your 1994-2004 Chevrolet S-10. Even though they are an older technology, you still find drum brakes on the rear of many modern vehicles. Like disc brakes, the brake drum and shoes will wear down over time, requiring replacement.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar 1aau.to/oEX/1AXAA00020
• 11mm Socket 1aau.to/oaRE/1AXAA00015
• 19mm Socket 1aau.to/oVI/1AXAA00043
• 8mm Socket 1aau.to/oaDb/1AXAA00017
• Brake Spring Tool
• 1/4 Inch Ratchet 1aau.to/oaDb/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oaRE/1AXAA00015
• Torque Wrench 1aau.to/oadY/1AXAA00044
• 3/8 Inch Wrench
• Anti-Seize Grease
• Gloves 1aau.to/orA/1AXSS00048
• Safety Glasses 1aau.to/omN/1AXAA00343
• Hammer 1aau.to/oHQ/1AXAA00091
• Wire Brush 1aau.to/on9/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@CoffeezSetup]

Awesome video, but it has one major flaw. I was following along while doing the drum brakes on my 96 Blazer and about almost to the end I realized that you never showed/told us to put the parking brake piece back up into the slot on the rear shoe. So I ended up having to undo all of my work to fix it and in the process I bent some of the springs slightly. I bent them back but haven't tested yet so I'll keep my fingers crossed. If there was a part showing/explaining that it would have saved me a lot of time. Other than that the video is awesome. Thanks 👍💙

[@bk2life]

@TRQ The issue with this video is the bottom white spring is upside down and will hit the adjuster wheel.

[@vondy4956]

Purple... fancy!

[@PdfSend-qf4vp]

Bottom spring is on wrong side. Interfering with adjusting wheel

[@jerrylalonde1199]

Does the long break go on back of break drum

[@ReedsWheel-ic4yb]

I noticed one pad is bigger then other which one is towards the back of truck?

[@jerrylalonde1199]

Does the long break shoe to back.

[@davidapoloniojimenez9825]

Cap