How to Replace Rear Engine Mount 2001-2005 Honda Civic

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@tkaxxdavexx6874]

I replaced this mount hoping to fix a clunk I had when accelerating from a stop and when heavy braking. I started noticing the clunk after I had the subframe out of the car when changing the transmission input shaft bearing. A year later, and after replacing nearly everything in the front end with no success, I finally found the issue. Apparently the subframe should be tightened with weight on the tires, not when jacked up. I loosened the 4 -17mm bolts holding it, let the car off the jack stands, then tightened them back up. Clunking is finally gone! Another thing I did was make sure the sway bar was aligned correctly, equal distance from the control arm on both sides - loosen the 2 bushing brackets and use a pry bar to wiggle it left or right as needed. I even paid a mechanic to diagnose the noise, he had me replacing parts unnecessarily. Thanks for video, hopefully my comment will also help someone out there, cheers!

[@lencranston8183]

I was looking for rear engine mount replacement help on my 2000 CRV AWD. I watched your video and of course, they are nothing alike, however, you did an excellent job making this video. Subscribing to your channel. Thank you.

[@tommyguns9008]

Why didn’t you use that right angle impact to loosen those bracket bolts? You used it to tighten them.

[@jessedelacruz243]

Is this a plastic mount?