How to Replace Starter 2004-2015 Nissan Titan

Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AES...
This video shows you how to install a new starter on your 2004-2015 Nissan Titan. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaXP/1A...
• 10mm Wrench 1aau.to/oJs/1AX...
• 10mm Socket 1aau.to/oaH3/1A...
• 12mm Socket 1aau.to/oaXW/1A...
• 8mm Socket 1aau.to/oaH3/1A...
• Fuel Line Disconnect Tool 1aau.to/ox/1AXA...
• Trim Tool Set 1aau.to/oSs/1AX...
• Needle nose pliers 1aau.to/owS/1AX...
• Needle nose pliers 1aau.to/owS/1AX...
• Pliers
• 1/4 Inch Ratchet 1aau.to/oaH3/1A...
• 3/8 Inch Drive Ratchet 1aau.to/oaXW/1A...
• Torque Wrench 1aau.to/oaif/1A...
• Gloves 1aau.to/ouR/1AX...
• Safety Glasses 1aau.to/opL/1AX...
• 5mm Hex Socket
• Pick 1aau.to/oCy/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@RyanBennett_Gpd605]

Love the engineers who decided to put the starter under the intake...

[@RoccoLovetere]

How do you crank the engine to release fuel pressure when the whole reason you’re doing this job is to replace the starter 😮

[@robertmacias279]

I wanna thank u sir. I just got done switching out my starter on my 07 Titan and I used your video, step by step. And it's starts right up. Thanks for taking the time to make this video. U are a true blessing sir

[@apum3000]

Did this on my 2010 Armada. There is no need to remove the fuel line nor the booster line; save time and money. Both lines have enough slack and so you can lay the intake sideways to the right.

[@Michaelpal1968camaro]

Your video just saved me $1500. Thanks for the amazing video. Keep putting them out!

[@terryromero5191]

This is the best DIY video I've ever seen!!!!!!!!!!!!!!!!!

[@user-hn3gw5nl6q]

Great video. I just finished replacing the starter on my 2004 Titan, started up just fine. Thank you!

[@mrradio2187]

I remember on my 1965 Ford Ranchero it took me about 30 minutes to change the starter. Cost for the rebuilt starter was $19.95, the same price for rebuilt alternator or generator as well.

[@sciomancy6]

I'm forever grateful for this channel. This helped me tons today. I followed every step and things went well. The two bolts on the starter did take some effort. I sprayed some WD-40 around the screws, then used a swivel breaker bar that was enough to fit inside. I did have to hammer the bar on one to break the screw. It took about 4 hours to complete the entire job. Now my truck is better than ever! Thank you!

[@michaeljohnston8417]

Used your video today to replace the starter on my 2015 Titan, easy to follow and accurate.

[@moisess.8827]

Thank you for making this video! It was easy to understand and follow. The most I've ever done before taking on this project was replace acar battery. Thanks to you I was able to successfully replace my starter. Thanks again!!

[@TheTurboDad]

One very important thing to do BEFORE installing the new starter. Test it on the bench. Some times you get a new syarter that is DOA and you dont realize until you put everything back together and youre screwed. Have to do the entire job all over again. You can ask the parts store to test it also before you leave the store.

[@user.A9]

I know I'm going to bleed and cuss a lot to complete this job.

[@josegort7427]

Awesome video. I just saved a bunch of money by watching this instead of paying the mechanic

[@TRQ]

+@josegort7427 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@burtburt1755]

I watch a lot of KZbin How To videos. Your video was very easy to follow and understand. The starter in the Buy The Part link is different for the 2010 Titan. Thank you for the good video.

[@erichead021484]

How did you break the last 2 bolts free from the starter. I got all the way to this part couldn't break the bolts loose and had to put back everything because I had to go to work the next day. I was so frustrated

[@loganandmel]

Torque the intake to 71 inch pounds? is that correct or did you mean 71 foot pounds?

[@soledadz1295]

Gracias a su explicación detallada y que todo lo da paso por paso es que pudimos cambiar el motor de arranque sin problemas, primera vez que lo hacíamos y todo salió a la perfección, la troca prendió sin ningún problema , le agradecemos mucho por su video!!!!!! 100% recomendable

[@kevinswisher4675]

Thank you for this video, I was going to buy a Titan, but seeing this I have second thoughts.

[@jwayne777]

Great video. I work on small engines and this video gave me the courage to do it.

[@user.A9]

Maybe disconnect battery before replacing the fuse so someone doesn't turn the key and repressurize the fuel?

[@xrpcryptonaire6712]

Best instructional video for this job!

[@fxdedopp-1681]

So the starter in the link under the description will 100% fit in a 07 titan? Been having trouble with others having to be before or after a certain manufacturer date so I’m not sure.

[@mohammedsharif2651]

Excellent video. You are a great teacher. I learned a lot from you. Thank you. 👏👏👏🙏

[@alisha75006]

Excellent demo, & production performance

[@galtboy1195]

What an excellent video! Thank you so very much!!!

[@Deadburd55]

Awesome video. Easy to follow along with. Thank you.

[@limitzone4074]

Man what a pain to change the starter I'd have done the fuel injectors when doing the starter already there

[@jonesy4588]

best way is with a new American made truck

[@merlin186]

What does fuel have to do with the starter

[@arthursok3163]

Do these steps apply to the 2004 Armada?

[@pablopicasso3641]

Bro, you shouldn’t use a sharp pick. Use pliers to break the rusted surface

[@bryanjohnson5597]

You are a God sent!😊

[@boashna]

bravo

[@Josselynttrades]

Looks like i will just head over to the mecanic

[@wenlee1220]

thank you.

[@Cyclone77]

might as well replace the engine now that it's all tore apart.

[@erichead021484]

Somebody please tell me how to break the bolts

[@hernandezru78]

The tork🎉 to 71 inch pound😮.!?!?!??!😮😮

[@tabryis]

Put in neutral then turn it over by hand duh

[@Elbrayan88]

Garbage car had to be a nissan