Рет қаралды 780
Buy Now!
New Steering Rack & Pinion Bellow from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install a new steering rack bellows boot on your 2011-2020 Toyota Sienna. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint.
Estimated installation time for a professional technician is approximately: 30 minutes
This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna
Tools you will need:
• Pry Bar 1aau.to/oacM/1A...
• 24mm Wrench
• 17mm Socket 1aau.to/ociP/1A...
• 21mm Socket
• Pliers
• Wire Cutters
• Ratchet 1aau.to/ociS/1A...
• Torque Wrench 1aau.to/obmt/1A...
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/obpm/1A...
• Safety Glasses
• Wire Ties
• Floor Jack 1aau.to/oaFx/1A...
• Hammer
• Jack Stands 1aau.to/oarU/1A...
• Pick 1aau.to/o7s/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.