How To Replace the Clutch on a Dyson DC04 Bagless Vacuum Cleaner

www.vacuumspot.com.au
A simple how to video to show you how to replace the clutch assembly on a Dyson DC04 vacuum cleaner. Stay to the end I put some bonus footage up.
The clutch for the DC03, DC04, DC07, DC14 are all the same part number # DC0407clutch
www.vacuumspot.com.au/dyson-dc...
Follow me on twitter @VacuumGuru
Check out our blog
www.vacuumspot.com.au/blog/

[@WhitebrookCentral]

Another elderly DC04 fixed thanks to this clear and straightforward video.

[@user-op3cg4yn9s]

HI Alex. This was a great tutorial which helped immensely in changing the clutch in my 18 year-old DC04. I guess common sense should have told me that the old belts would have stretched, but the new ones were so much smaller that the brush bar was not even long enough to stand up through the footplate hole - I had to thread a piece of cord through it before replacing the plate and pull it through that way to get the hook of the belt lifting tool through it. Then what an effort to hook it round the pegs! Anyway, job done and the loud grating noise from the old clutch has gone. Thanks again

[@ClaireSpeedie-zz8tf]

Thanks Alec, Dyson DC04 dating from 2005 repaired with new clutch belt. Lovely to be able to repair, rtaher than landfill.

[@melodicdreamer72]

It has been a while since anyone commented, but the video just helped me fix my DC07. The thing has a whistle to it now and that brush bar is unstoppable. It hasn't picked things off the carpet, like it does now, for a long time. By far the hardest part was to get the belt on the brush bar - the belt tool fixture didn't quite fit, so I used one knob on it and finagled it the rest of the way with the belt pry tool That new belt is something extremely tight. Thanks for the video tutorial!

[@MannyRUA]

Found this from the Manchester Vacs Dyson forums. Good stuff.

[@eekbeatsofficial]

You saved my hoover. Huge respect for the video

[@wivaquif]

Just finished my dc04 motor replacement thanks to your help. Hate to do your job, they’re so fiddly, like a 3D jigsaw. Thanks

[@VacuumSmart]

:) They are so repairable I love putting up these videos

[@willvaszocz2469]

used this to do a DC07. great tutorials.

[@VacuumSmart]

Hah yea including the bloopers is my wifes idea. There are normally a few warm up attempts. I launched into one the other day and started out by saying what I would normally when I answer the phone :) Good Morning VacuumSpot this is Alec....

[@chessdude67]

You make it look easy. Excellent video. Thanks for the bloopers at the end! Thumbs way up! Tim Ohio :)

[@SidheS]

Thanks so much for this. I've just finished using this video to help me replace the clutch and belts in my old DC04, and it's hugely improved. But a warning for other viewers (for the knob removal at around #02:00): note that on some models (mine's a 1999 DC04 Absolute), the end of the clutch is the same colour plastic as the clutch knob that you actually need to remove. (In this video the end of the clutch is black and the knob is yellow.) On mine, *both* were yellow, and so looked to be one part, so I ended up inadvertently trying to pry the end of the clutch off rather than prying the knob off. That broke the end of the clutch, but happily, of course, I was replacing the clutch anyway, so it wasn't a problem. Just thought I'd mention it in case somebody tries to take off the clutch off an older model in one piece! (On those models, the knob also looks slightly different: it has a black spot rather than a pointer.)

[@sconwaysmith]

I've had to do several repairs to my old DC01, but not quite to that extent. It's now relegated to our backup/upstairs hoover but a permanent resident on the landing!. They should build houses with upstairs broom cupboards.

[@brutusoftroy7451]

Great vid. Fixed mine no trouble. Thank you very much.

[@colinhoward7901]

Very useful video. Well done and thanks so much!

[@marfstone]

Thank you so much .... I used your help as well as another and I got it done myself!!!! ;)

[@jamesscott9854]

Ripper !! cheers Alec, saved me a few bob....

[@MrChestertonian]

OOHHHHH THANK YOU, THANK YOU, THANK YOU!!!!! You have saved my checking account.

[@andythehedge]

Yes if the brush bar is not spinning then you would need to inspect the clutch and the belts, if the belt is broken then you could change the belts or replace the entire clutch. Either way this video shows how to get to the clutch

[@jimmyeccles]

Hi, vert good demo but just wondering why you would need to do this (you did not specify the fault) would you replace the clutch belt if the brush roller is not spinning?

[@CheshireTomcat68]

My dc04 has a thin metal bar which seems to stop the belt coming off the motor spindle, just to the right ,on screen, of the thin belt at about 4:25. It's a bugger to refit but I can't see one on yours. Is it necessary? great vid, very useful.

[@mickyjb2003]

The cylinder box where all of the dust goes on my dc04 vacuum cleaner for some strange reason won’t come off can you advise?

[@VacuumSmart]

Hi There, You know I actually don't know why they become brittle only that it is pretty easy to crack a bit of the plastic off (yes I have broken a few over the years) requiring a new head piece. I suspect that the plastic is simply not reinforced or wide enough at the point of pressure.

[@royfoss69]

hi alec, could you please do a complete clean for the dyson dc14 all floors. i have done a clean up on my dyson but i have missed a few spots cause i am scared i am going to break it thanks!!!

[@MrMultitool]

I was going to ask You were I could get a torx 15 driver like that myself. I have'nt seen one that long. I enjoy your videos very much. I like that belt tool also Where can I get one of those? Thanks again and please keep these videos coming!

[@VacuumSmart]

The belt tool we actually have listed on our website vacuumspot(dot)com(dot)au I dont think it has a picture but I will try and sort that out soon