How to Fix Dyson DC07 DC14 Brush Roll Not Spinning - Clutch Replacement

[@brentjohnson4650]

Well done, Joshua! Helped our housekeeper refurbished her Dyson DC14 & keep her expenses low. Great video. Excellent step by step. Keep em coming!

[@vacuumsrus]

Glad it helped!

[@KarenWeissenstein]

Followed your instructions for changing the clutch.....everything was easy except for popping off the orange cap (carpet/hard floor cap) wonderful instructions! Thank you so much! You made it easy for this old lady to understand! Lol

[@vacuumsrus]

Glad we were able to help!

[@sarabruno2691]

Thank you for this! You kept my 15 year old vacuum going longer with this step-by-step video. I appreciate you!

[@vacuumsrus]

Glad we could help!

[@erinmerrell8489]

Excellent video! Swapped out the old clutch for a new one and now my vacuum is working just like new!! Thank you!!!

[@vacuumsrus]

Great to hear!

[@lindabowen9283]

I did it!! I watched the clutch rebuild and the install/reinstall clutch video to see if it was something that I thought I could do. I decided I could do it, ordered the clutch rebuild kit and got it done. I had a few glitches but had the laptop next to me to replay several sections of the videos that I hadn't quite caught. Got it reinstalled and it works better now than it did when I inherited it from my son. I am very proud that I attempted it and got it done...FYI, for what it's worth, I'm a 74 yo woman...just sayin;...

[@vacuumsrus]

We're so glad to hear that!!!

[@deadliftD]

Ax to grind with Dyson for some reason... They are good vacuums. I've had the same one for almost 20 years. They last if you maintain them. I've even gotten them out of the trash, completely stripped them down and reassembled them. They are good as new.

[@joshyouwa]

Thank you for your comments random guy on the internet. After careful consideration I have realized that your singular experience with a Dyson vacuum far outweighs my experience inside tens of thousands of vacuum cleaners. After hearing your story I have changed my mind and now love Dyson vacuums. I am going to suggest to our team that we no longer sell Riccar or Sebo vacuums and instead dumpster dive for the far superior Dyson vacuums. They will save so much money I am bound to get a raise!

[@deadliftD]

You have clearly spent too much time inhaling vacuum dust.

[@vacuumsrus]

That is a 100% accurate observation.

[@kilabeez0]

Wow imagine getting sassed by a zesty vacuum repair guy. You’re not impressing anyone by being an asshole vacuum repair boy.

[@tadrwagner]

I followed your instructions to the letter, and I had a successful reinstall of a rebuilt clutch!!! Thank you very much! I’m an average handyman by anybody’s account so this is a big deal for me. If it wasn’t for your instructions I wouldn’t have been able to pull it off. Thanks to you using your screwdriver for all this stuff, (special tool? We don’t need no stinking special tool) I was able to install it before that @*## tool arrived (because I’m too damn impatient) You are DA MAN!

[@vacuumsrus]

Glad to hear that!

[@mevk1]

The best video on transmission belt replacement -thank you!

[@vacuumsrus]

Glad it helped!

[@tadrwagner]

I agree I tried to follow the instructions of other people, but this one was the best!

[@lisaoflight4923]

You Rock! I only needed to clean the brush roll inside and out no new clutch required. Woo hoo! After watching many videos, yours is the only one that showed me how the brush roll comes apart! The IT twins were the only thing keeping the brush roll from spinning! 😂🙌🏼Thank you for being so thorough and saving me a lot of time trouble and money🙌🏼😊

[@vacuumsrus]

Glad it helped!

[@mdeloura]

Thanks! You inspired me to take a crack at fixing our DC14. The clutch that arrived was marked "2018" hahahah but works great! I don't think I would have survived without the belt removal tool though, the new belt was so tight that it was really hard to get the beater brush back on!

[@vacuumsrus]

Glad to hear it worked out! The belt tool is a must-have!

[@zmanifest]

This is very useful information thanks! Just like my grandpa John used to say, “if you have all the right tools with you, you’ll be able to do the job properly.”

[@vacuumsrus]

Very true! Glad we could help!

[@greggdavies8572]

Well got my girlfriends Dyson (which I am not a real fan of) running again. Amazon had the clutch over nighted for $45. Of course once I had it apart it was just a broken drive belt off the motor. Oh well, she got a fresh clutch installed, thanks to your "short cuts". Have screw driver will travel!

[@sheri023]

Thank you. I got the small belt on the drive shaft. I will attempt the big belt tomorrow after recuperating from wrestling with the small clutch belt. I hope I don't ruin the clutch pulling too hard with my screw driver. Swearing helps.

[@AlterAbility]

It was going so well! I snapped the ear off (4:36) when trying to knock off the orange knob (6:49). Well, I’m going vacuum shopping. 🥳 Thanks for the video ❤

[@davidlrogers]

a year later, you're still coming in clutch 😩👌 (sorry) i've only one had two Dysons that lasted (the OGs), i probably will never get another one, but at least my DC14 FA is good to go for another 10 years. i put the brush back on without the brush rod/caps inserted just to have a little less to have to pull the belt around, seemed to help a bit.

[@mikeragusky9077]

Thank you for this video. I am planning on calling you all up order a clutch and belt soon.

[@vacuumsrus]

We look forward to hearing from you!

[@ToneObsessed]

Thank you very much for this very helpful video! The clutch failed on our 2005 DC-14 and this information was just what I needed to wrestle a new clutch into it. Hopefully we'll get a few more years out of it. Dyson, of course, has completely washed their hands of this model; no parts support, no repair support, no tech support beyond a few troubleshooting script cut-n-pasters in some 3rd world call center.

[@vacuumsrus]

Glad it helped!

[@1crazypj]

@@vacuumsrus I fell for the advertising as well after using my sister Dyson in 2004 🙃. Surprisingly, the clutch is still fine but the motor to clutch belt finally failed after 18 years. Now I can see exactly what to do I'll be getting some belts instead of a new vacuum. Thank you sir.

[@SMLSLT]

Extremely helpful. I was able to get the clutch from amazon.

[@vacuumsrus]

Glad it helped!

[@theresamcglone379]

really easy video to follow and loved the expert tips in how to remover certain parts. However I also have two screws leftover (like in the video) and a magnetic catch, that you took out but I did not hear you say to put back in). They are definitely from this Dyson as I only have one , so I'm going to have to go back for the magnetic catch and find another video to find where the two screws we both have are from.l ol

[@christophermoeller8221]

Thanks for sharing this information! I was able to install the new clutch!

[@vacuumsrus]

Great to hear!

[@louisemclenithan2305]

Thanks so much. This saved me buying a new vacuum.

[@vacuumsrus]

Glad we could help!

[@markstack8997]

I used a 6 or 8 inch loop of twing through the belt and wrapped around my wrist. I streached the belt enough to put the beater bar through it nice and easy.

[@ThaBossHogg]

great tutorial. thank you. but you mentioned a couple of times that there are better vacuums out there. what is your recommendation for a great dane household? hardwood floors in main areas, carpet in the bedrooms. Thanks again for a great how to video

[@vacuumsrus]

Glad we could help! We like Riccar and Sebo!

[@colinreid976]

Great video! Fixed our Dyson DC07. Thanks

[@vacuumsrus]

Glad it helped!

[@lumanshadowboyhisdogfriend3488]

Do you have a video on how to rebuild the clutch? I would love to learn how to do that. ❤ Thank you for the info on my Dysons crappy clutch 😂lol 🤙👍

[@mattheww1097]

I just got new roller with both belts took it apart, and was like wth you can't just install the belts so I spent 3 hrs disassembling the clutch and fighting it trying to figure out where the 50pcs that flew everywhere went! Lol works great now tho, still gonna order a clutch before I can't find one

[@Rudenutts]

Awesome video helped me do much👍🏼

[@vacuumsrus]

Glad it helped!

[@rcmen231]

Can you make a clutch bypass? Like make a direct rubber to the rollers?

[@HEXEPOBO]

@13:49 do not assemble brush axle, do it after putting belt on, so you can avoid all this PITA @15:05

[@mali0049]

Such a good tutorial!!

[@vacuumsrus]

Thank you for watching!

[@RandyDougherty-bb6jd]

Great video. Helped me fix out vaccum. Thanks!

[@vacuumsrus]

Glad it helped!

[@cycohlic]

Very nice and to the point. One suggestion, spend the $7.00 and get the belt replacement tool. It makes putting that belt on beyond easy and safe.

[@crickle47]

On that flexible hose, you will notice that the two "ramps" on the yellow housing...one ramp is actually closer to the hole, than the other one, so you basically just "screw" it on, and it goes very easily.

[@cathymitchell2886]

Great video!! I hate my dc14. Any recommendations for a new vacuum cleaner? I have kids and pets so a good vacuum cleaner is a must!

[@vacuumsrus]

Hi there, this video might help depending on your budget! kzbin.info/www/bejne/gIi7e6pmfLyHhNE

[@mrspiazzaus]

My DC14 isn’t turning 😢. My dad cleaned the brush too. Any ideas ? I never replaced that clutch for sure. Could be sometime else ?

[@jonathangray3243]

Great video fix my vacuum. Thank you

[@vacuumsrus]

Glad it helped!

[@christensellstemecula]

I'll be replacing my clutch that just arrived yesterday...you said a "real" vacuum would eat your hand alive. What do you consider a "real" vacuum? What models/brands would you recommend for anyone in the market for a new vacuum?

[@tadrwagner]

I can tell you that after the new clutch is installed, I was NOT able to stop it by hand without hurting my hand. With the OLD clutch, it stopped VERY easily!

[@markstack8997]

I used a long loop of good twine tied through the belt and around my wrist. The beater bar went into the streached out belt nice and easy.

[@dallasclement4682]

Thanks much for the great video. Things went mostly okay for me. I managed to bust the clutch shrowd. There are two screws on the back side. One goes into the shrowd and the other goes into something else. I got the wrong one. Also, you should wear protective eye gear! When I was using my big screw driver to stretch that belt, it jumped on me and I stuck myself in the face. 🥲

[@sergioleone4215]

At the 5:00 mark, what happens if the tab breaks off? Yup, just happened to me as I was trying to replace the clutch. Edit: Never mind, I just called the Dyson service center near me and they said they no longer have parts or support for this model. I bought a new vacuum and will return the clutch to Amazon. Great video though.

[@vacuumsrus]

In store if that happens we eat it and replace the entire clutch with a rebuilt clutch. If it is your machine you are working on you CAN duct tape and glue it together. It's not an ideal fix and not a good enough fix on our bench but it will work for a while.

[@vacuumsrus]

you can order a rebuilt unit here if you need www.vacuumsrus.com/product/cleaning-2/vacuum-supplies-cleaning-2/vacuum-belts/dyson/renewed-dyson-clutch-w-belt-dc07-dc14-dc33/ they are built to order so will show backorder 2-3 weeks. It normally only takes a couple days for us to get them rebuilt and sent out.

[@MelodyyForge]

I'm sure that.this is what I need to do to fix mine, but before I do do you know of any other reason as to why my brush wont spin before I do? Tia!

[@lovesstorms]

Very helpful! Thank you!

[@vacuumsrus]

Glad it was helpful!

[@takerhay2197]

just got a new clutch for myn and installed it but i noticed when its upright the brush roll struggles to spin but once its on the carpet its fine is that normal

[@rkidlat]

Hellllp! Thanks for the great video but my t15 closest to the front won't come out. I loosen it and it just keeps spinning with about 40% resistance but never comes looser. I removed the big knob on the side to see if it would help. It didn't. 😢 What's holding it in? Loose nut? Am i hosed? I've watched several videos and I am the only one dealing with this problem!

[@vacuumsrus]

It is very common for the mount that the front screw attaches to to snap off entirely. The mounting point is part of the brush roll housing. In this case you can normally pull the clutch cover out with some force. It's not ideal to reassemble it with only 2 of 3 screws attached but it will "work" most of the time. Again, follow these suggestions at your own risk. It is possible that removing the clutch cover with force could shatter the brush housing.

[@sherluck271]

What filter ir is a filter needed on the side dc14 animal vac labeled air flow duct?

[@rkidlat]

Excellent video! Thank you

[@vacuumsrus]

Glad it helped!

[@JENLMC56]

What happens if your brush is NOT spinning? Would that also be because the clutch has gone bad.

[@ToneObsessed]

Yep, that's what is wrong with mine. The brush "wants" to spin, but the clutch is so shelled out it doesn't spin more than maybe once or twice before stopping. Any resistance and it is stopped.

[@randalrichey6408]

Enjoyed your content. Quite helpful. So, like the digs at Dyson build. So what vaccuum do you recommend other than Dyson?

[@tomsbigtrucks]

What brand is a good vacuum? have a old Hoover upright commercial with plastic dust cup the brushes are even replaceable it still works but needs a new cord. Great video!

[@vacuumsrus]

It really depends on your home and lifestyle. Sebo and Riccar are both great options. You may want to check out our comparison videos and vacuum webpage at www.vacuumsrus.com/product-category/cleaning/vacuumcleaners/ to get an idea of what types of vacuum are out there.

[@mensaswede4028]

If price is no object then Miele is really the way to go. They are good quality but they are overpriced.

[@mensaswede4028]

Amazon claims to be selling brand new clutches for the DC-14 for $39.99. I wonder if they’re authentic Dyson parts or aftermarket.

[@corylyonsmusic]

What if the brush doesn't rotate AT ALL? Same issue likely?

[@saberpeep]

Turns out the issue with ours was that the belt to the motor dry-rotted and broke. Nothing wrong with the old clutch, but had to replace it since its the only way to get the belt.

[@anthonyocarroll5630]

Can you please advise me what torx screwdriver fits the three screws on cylinder cover so I can clean wash out the vortex.i have a T15 screwdriver but it doesn't fit due antitampering screws

[@KittyNoNo]

What model do you have? I'm not sure about the DC14, but the DC07 only uses T15 screws. There are 3 T15 screws way down in the cyclone of the DC07 which are easily accessible with a long T15. However, in addition to being screwed together, the two pieces (the upper, brightly colored cone, and the lower silver part) are permanently bonded/welded and do not actually come apart, so don't waste your time removing the screws. I would just check to make sure the screws are tight if you have a long T15. The key to successfully washing out a DC07 cyclone is to make sure it's absolutely 100% dry before vacuuming. I blow it out thoroughly with compressed air, then let it sit near an air vent for a week - or as long as I can. Then I blow it out again to make sure it's dry! In 21 years, I've washed out my cyclone 3 times. A cheap and simple way to keep your Dyson performing as new! Good luck!

[@anthonyocarroll5630]

@KittyNoNo thankyou for the great advice Happy New Year

[@travismeyers2083]

Very helpful. Thank you

[@vacuumsrus]

Glad it was helpful!

[@AudreyHayes-rc4yf]

Where can I take it to get it fixed

[@vacuumsrus]

You can try some local vacuum shops near you!

[@TimOyer]

Worked great.

[@vacuumsrus]

Great to hear!

[@rhondahawkins9174]

What do you recommend for a good vacuum?

[@vacuumsrus]

Hi there, this video might help! kzbin.info/www/bejne/gIi7e6pmfLyHhNE

[@TheMumblingVentriloquist]

Changed my clutch. Everything is back together. Getting suction. Roller is spinning. Picking up like normal. Canister is filling up but i am getting the clicking sound when pushing forward only. I did not replace the hose spring. Could this be the problem? Any ideas that can help this issue?

[@vacuumsrus]

There are a lot of things that can cause that. Due to the age of the machines there are just a lot of older plastic parts rubbing in ways they shouldn't be. I don't think not changing the hose would cause it persay but since the hose does control the elevation of levelness of the head it's entirely possible the head is bent at a bad angle and causing wheels to click.

[@TheMumblingVentriloquist]

@@vacuumsrus Okay. Thank you. 😀

[@hoovernunez]

Thanks as you say do it at your own risk. But If i found no spare parts because it’s an old Dyson and no more new ones because they had been phaseout then one will try. I did it with an old canister Dyson DC39c. At first I gave up because motor burn and smell burn you know so i got a Miele C3. But i didn’t throw away that one and later I found a Panasonic motor not expensive (35USD) that fit there. Also I made a cover with HEPA filter textile (it’s not suitable for Aquarium it’s not fiber glass) to replace the old exhaust paper filter that i accidentally broke while taking out the burned motor. Later I found that those filters were again available so may be some day I will buy one of those. Because as you say this Dyson different than the Sanitaire or Electrolux there are no third party nor OEM manufacturers. Some day I think if the cyclone or other part got broken it will go to the trash but now it works I use regular to clean pets bed and the car so because it’s bagless it collects pet hair and the car dirt without buying bags. Still have to wash pre motor filter and after one year changed again the post motor textile because i still have enough to anyway it works not the same but it works.

[@Machine4977]

Would be considered a torque limiter clutch

[@ash1eyrose]

You really do need to be extra careful with the plastic, cuz it gets extremely brittle, and all it takes is the slightest amount of pressure in the wrong spot. Do you think the newer dyson vacuums are as sh*tty as this one? And are the vacuums that are better, are they all also more expensive? Or are any cheaper? Thanks

[@carnold.knowledge]

I appreciate the steps shown here, but it sure seems like the tech likes to use a big flathead screwdriver (and occasionally a hammer) on some somewhat delicate parts. Not sure I would want this guy monkeying around with my vacuum. It seems like there are better tools and techniques to treat your vacuum properly.

[@gruberjohn1]

So its basically a POS SO DONT FIX IT GET A NEW ONE

[@endfedinctaxonindividuals7486]

It is decent vacuum. For $50 or $60 bucks. Not that difficult to replace the clutch.