How to Replace the coolant pump on the 5631 - Jaguar X-Type 2001 to 2011

Do you need to Replace the coolant pump the Jaguar X-Type 2001 to 2011 but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Jaguar X-Type (2001 - 2011) manual covers petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
What's covered:
Petrol:
Jaguar X-Type Estate 2.0 litre (2099cc) (2001 - 2011)
Jaguar X-Type Estate 2.5 litre (2495cc) (2001 - 2011)
Jaguar X-Type Estate 3.5 litre 4-cyl (2967cc) (2001 - 2011)
Jaguar X-Type Estate 3.5 litre V6 (2967cc) (2001 - 2011)
Jaguar X-Type Saloon 2.0 litre (2099cc) (2001 - 2011)
Jaguar X-Type Saloon 2.5 litre (2495cc) (2001 - 2011)
Jaguar X-Type Saloon 3.5 litre 4-cyl (2967cc) (2001 - 2011)
Jaguar X-Type Saloon 3.5 litre V6 (2967cc) (2001 - 2011)
Turbo-diesel:
Jaguar X-Type Estate 2.0 litre (1998cc) (2001 - 2011)
Jaguar X-Type Estate 2.2 litre (2198cc) (2001 - 2011)
Jaguar X-Type Saloon 2.0 litre (1998cc) (2001 - 2011)
Jaguar X-Type Saloon 2.2 litre (2198cc) (2001 - 2011)

[@jaguarrroman]

Thank you for the video! Your tutorial is very detailed and even encyclopedic, I would say. I will surely make use of it if I need to replace a coolant pump in the future. And for the present I am waiting for delivery of a new thermostat from ebay. Cheers!

[@HaynesManuals]

Great to hear!

[@roger5384]

I noticed that you fitted the radiator support bar, back to front

[@athanasiostsintzas3152]

Congratulations for making us understanding safety and methodical procedures. In case you have any video regarding the replacement of upper radiator hose - thermostat, it would be of high value

[@disdonc6012]

The pully nuts have to be tightened to 11 Nm according to the shop manual.

[@javiercardellachasensio6001]

Hello, I bought a SKF VKPC 84626 water pump for the Jaguar X-Type 2.5 2001 and I was surprised that the contact area with the gasket is rough instead of machined as usual. Is this rough finish cast aluminum correct to be installed with the gasket? Or it is better to install it with joint former. I am considering returning this pump and buying one with the machined surface (Febi 43504). Thanks

[@HaynesManuals]

As long as the gasket is thick enough to absorb the surface irregularities, it shouldn't leak. Jointing compound won't hurt though...

[@javiercardellachasensio6001]

@@HaynesManuals Thanks

[@disdonc6012]

I put some non-hardening sealant by Victor Reinz on both sides as another video shows as well. Can't go wrong with that. I scratched my mating surface quite a bit because the old gasket material was so stuck to it. I sanded the surface a bit with very fine sand paper (2000, 3000).