How to Replace the Front Brake Pads & Rotors on a 2005 Toyota Camry

Easy to follow step-by-step guide on how to do your own front brake job. If you have any questions, drop them in the comments below and I’ll get back to you when I can.
Tools Used:
-Hood prop.
-Rubber mallet.
-3/8in ratchet.
-14mm socket.
-17mm socket.
-14mm & 17mm wrench.
-8mm wrench.
-Two different sizes of flat tip screwdrivers.
-Air gun.
-Caliper piston compressor.
-Phoenix flush gun.
-Brake clean.
-Ceramic grease.
-Anti seize.
-Suction ball.
-Water bottle with hole on top.
Parts Used (for front of vehicle):-Brake pads.
-Rotors.
-Dot3 brake fluid.
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!

[@Itsbylebih]

roy this was super helpful and really well put together video! Thank you!

[@FredTheLutinoCocatiel]

Another job finished with precision thank you for the instruction Roy 👍

[@silverdragontaylir8252]

Smooth job

[@unclesam1707]

Great job

[@5star141]

Why would you loosen bleeder screw?, use some muscle to compress piston, loosening bleeder screw allows air in the lines & double the work if you have to re-bleed brakes.

[@RoysGarage808]

It’s better to loosen the bleeder while the caliper is mounted rather than when it’s taken off, I bleed the brakes every brake job so it’s not a problem. Thanks for watching 🤙🏽🤙🏽🤙🏽

[@omedbakr1714]

Halaw mstar good