Рет қаралды 117,225
My Fusible link blew (Main Fuse / 80amp Fuse) popped on Bobcat and to replace this main fuse is a little more complicated than merely pulling the fuse straight out.
To remove this fuse, you need to disconnect the fuse box from the inner fender. Unclip the bottom of the fusebox by pushing on the two tabs then pull it forward to expose the wires.
From there you need to push on the tab to release the fusible link and push it down. This will expose the bolts so you can remove them.
Now you can replace the fuse.
Don't forget to subscribe!
-- keep crawling --
*******************************
FOLLOW US ON SOCIAL MEDIA
Website - snailtrail4x4.com
Facebook - / snailtrail4x4
Instagram - / snailtrail4x4
Twitter - / snailtrail4x4
Google+ - plus.google.co....
*******************************
LIST OF MY CAMERA GEAR
DJI OSMO - amzn.to/2vMqTPP
Rode VideoMicro (compact) - amzn.to/2fxEy6S
DJI Mic Mount - amzn.to/2vMxTMJ
GoPro Hero 3+ Silver - amzn.to/2vWmJFu
GoPro Aluminum Housing w/ mic mount - amzn.to/2uNYep3
GoPro Mic Cable - amzn.to/2vudOrU (cheap by 2, they will break)
Rode VideoMicro Go - amzn.to/2hRkoW9 (No Batteries Version)
Bendy TriPod - amzn.to/2vMs9m0 (DSLR Version)
Bendy TriPod Head - amzn.to/2uNxMfb
DISCLAIMER:
Some of these links are affiliate links at no additional cost to you. I will end up receiving a small commission if you end up purchasing some of these tools or products in the links. In some cases, you will actually receive a discount. I believe in being transparent with my community, and hopefully, with providing you with tools of the trade, you will, in turn, have no problem helping me out.
#snailtrail4x4 #toyotatacoma #offroadtoyota